对委员会决定2009/894/EC的勘误，该决定关于为给木质家具授予共同体生态标签制定生态标准(OJ L 320, 5.12.2009)
技术法规类型：欧盟Eurlex法规 来源：tbtmap
EURLEX ID：32009D0894R(01)
OJ编号：OJ L 209, 17.8.2011, p. 62-62
中文标题：对委员会决定2009/894/EC的勘误，该决定关于为给木质家具授予共同体生态标签制定生态标准(OJ L 320, 5.12.2009)
原文标题：Corrigendum to Commission Decision 2009/894/EC of 30 November 2009 on establishing the ecological criteria for the award of the Community eco-label for wooden furniture ( OJ L 320, 5.12.2009)
文件类型：二级立法 Decision|决定
法规全文：查看欧盟官方文件
| 17.8.2011 | EN | Official Journal of the European Union | L 209/62 |
Corrigendum to Commission Decision 2009/894/EC of 30 November 2009 on establishing the ecological criteria for the award of the Community eco-label for wooden furniture
( Official Journal of the European Union L 320 of 5 December 2009 )
On page 28, Criterion 3:
for:
‘�e) Formaldehyde emission from untreated raw wood-based materials
Wood-based materials are only allowed in a piece of furniture if they comply with the following requirements:
| (i) | Particleboard: the emission of formaldehyde from particleboards in their raw state, i.e. prior to machining or coating, shall not exceed 50 % of the threshold value that would allow it to be classified as E1 according to standard EN 312. Assessment and verification: The applicant and/or his supplier shall provide evidence that the wood-based materials comply with this requirement according to the European standard EN 312-1. |
| (ii) | Fibreboard: The formaldehyde measured in any fibreboard used shall not exceed 50 % of the threshold value that would allow it to be classified as class A quality according to EN 622-1. However fibreboards classified as class A will be accepted if they do not represent more than 50 % of the total wood and wood-based materials used in the product. Assessment and verification: The applicant and/or his supplier shall provide evidence that the wood-based materials comply with this requirement according to the European standard EN 622-1.‘� |
read:
‘�e) Formaldehyde emission from untreated raw wood-based materials
Wood-based materials are only allowed in a piece of furniture if they comply with the following requirements:
| (i) | Particleboard: the emission of formaldehyde from particleboards in their raw state, i.e. prior to machining or coating, shall not exceed 50 % of the threshold value that would allow it to be classified as E1 according to standard EN 312. |
| (ii) | Fibreboard: the emission of formaldehyde from fibreboard(s) in their raw state, i.e. prior to machining or coating shall not exceed 50 % of the threshold value that would allow it to be classified as E1 quality according to EN 622-1. However, fibreboard(s) classified as E1 will be accepted if they do not represent more than 50 % of the total wood and wood-based materials used in the product. Assessment and verification: The applicant and/or his supplier shall provide evidence that the wood-based materials emit less than 4 mg/100 g according to EN 120 (perforation method) or less than 0,062 mg/m3 according to EN 717-1 (chamber method). Additionally, a declaration that a system of factory production control in accordance with EN 312 or EN 622-1 has been established, shall be provided.‘� |
On page 29, Criterion 4:
for:
‘�c) Formaldehyde
Formaldehyde emissions from substances and preparations for surface treatment liberating formaldehyde shall be less than 0,05 ppm.
Assessment and verification: The applicant and/or his supplier shall provide a declaration that the above requirement is met, together with information on the formulation of the surface treatment (e.g. Material safety data sheets).‘�
read:
‘�c) Formaldehyde
Formaldehyde emissions from substances and preparations for surface treatment liberating formaldehyde shall be less than 0,062 mg/m3.
Assessment and verification: The applicant and/or his supplier shall provide a declaration that the above requirement is met, together with either information on the formulation of the surface treatment (e.g. Safety Data Sheets) or test results proving that the maximum formaldehyde emission value does not exceed the stated limit (based on EN 717-1).‘�
附件:
托管标准，您可以接收以下服务：
1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户；
2 随时在标准托管页面中查看到该条标准的最新状态；
3 若用户有在学习和科研中的需要，可以在标准托管页面中试阅标准；
4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持；
5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询；
6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务；
标准资讯点击排行榜 全部
资讯标题点击
[[ n.title ]] [[ n.read ]]大连标准化公共服务平台
版权：大连标准化研究院有限公司
地址：大连市中山区高原街56号
电话：0411-82740851
