大连标准化公共服务平台|国际技术法规

委员会委托指令2014/73/EU ，为适应技术进步，就在用于电导率测量镀铂的铂电极豁免含有铅的应用，修订欧洲议会和理事会指令2011/65/EU 的附件IV

技术法规类型：欧盟Eurlex法规来源：tbtmap

EURLEX ID：32014L0073

OJ编号：OJ L 148, 20.5.2014, p. 80-81

中文标题：委员会委托指令2014/73/EU ，为适应技术进步，就在用于电导率测量镀铂的铂电极豁免含有铅的应用，修订欧洲议会和理事会指令2011/65/EU 的附件IV

原文标题：Commission Delegated Directive 2014/73/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in platinized platinum electrodes used for conductivity measurements (Text with EEA relevance)

分类：15.10.30.30_废物管理与清洁技术

文件类型：二级立法 Directive|指令

生效日期：2014-06-09

废止日期：2058-12-31

法规全文：查看欧盟官方文件

L_2014148EN.01008001.xml

20.5.2014

Official Journal of the European Union

L 148/80

COMMISSION DELEGATED DIRECTIVE 2014/73/EU

of 13 March 2014

amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in platinized platinum electrodes used for conductivity measurements

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, (1) and in particular Article 5(1)(a) thereof,

Whereas:

(1)	Directive 2011/65/EU prohibits the use of lead in electrical and electronic equipment placed on the market.

(2)

Platinized platinum electrodes (PPEs) are platinum electrodes covered with a thin layer of platinum black. These electrodes are used when wide-range conductivity measurements are required or for measuring conductivity under strongly acidic or alkaline conditions. Both the substitution or elimination of lead in PPEs and the substitution of PPEs with other types of electrodes are scientifically and technically impracticable under these conditions.

(3)

The use of lead in PPEs for wide-range conductivity measurements or for measuring conductivity under strongly acidic or alkaline conditions should therefore be exempted from the prohibition until 31 December 2018. This transition period is necessary for research and unlikely to have adverse impacts on innovation.

(4)	Directive 2011/65/EU should therefore be amended accordingly,

HAS ADOPTED THIS DIRECTIVE:

Article 1

Annex IV to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

Article 2

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by the last day of the sixth month after entry into force at the latest. They shall forthwith communicate to the Commission the text of those provisions.

When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Article 4

This Directive is addressed to the Member States.

Done at Brussels, 13 March 2014.

For the Commission

The President

José Manuel BARROSO

(1) OJ L 174, 1.7.2011, p. 88.

ANNEX

In Annex IV to Directive 2011/65/EU the following point 37 is added:

‘�7.

Lead in platinized platinum electrodes used for conductivity measurements where at least one of the following conditions applies:

(a)	wide-range measurements with a conductivity range covering more than 1 order of magnitude (e.g. range between 0,1 mS/m and 5 mS/m) in laboratory applications for unknown concentrations;

(b)

measurements of solutions where an accuracy of +/‘�1 % of the sample range and where high corrosion resistance of the electrode are required for any of the following:

(i)	solutions with an acidity < pH 1;

(ii)	solutions with an alkalinity > pH 13;

(iii)

corrosive solutions containing halogen gas;

(c)	measurements of conductivities above 100 mS/m that must be performed with portable instruments.

Expires on 31 December 2018.‘�/p>

附件:

P020171219663074877118.pdf

标准托管

托管标准，您可以接收以下服务：

1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户；

2 随时在标准托管页面中查看到该条标准的最新状态；

3 若用户有在学习和科研中的需要，可以在标准托管页面中试阅标准；

4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持；

5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询；

6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务；

进入企业标准托管

标准查新

您可以通过编辑查新模板，批量查询指定标准集的最新情况。我们会通过查询，向您展示您所查询标准的：

1. 准确的标准号及标准名称(我们通过人工智能技术对您提交的标准号进行自动纠正)

2. 标准的最新状态(现行、废止或未发布)

3. 若标准已废止并被新标准替代，会反馈被替代的标准

4. 若您已托管此标准，便可以实时跟踪这个标准的最新状态

标准查新模板下载

标准查询

[[ c.nature | nature ]]

点击查看

[[ c.title ]]

[[ c.status ]]

大连标准化公共服务平台

版权：大连标准化研究院有限公司

地址：大连市中山区高原街56号

电话：0411-82740851