大连标准化公共服务平台|国际技术法规

委员会实施条例(EU) 2016/129，批准聚六亚甲基双胍盐酸盐(PHMB (1600;1.8) )作为2、3、11生产型生物农药产品的活性物质

技术法规类型：欧盟Eurlex法规来源：tbtmap

EURLEX ID：32016R0125

OJ编号：OJ L 24, 30.1.2016, p. 6-11

中文标题：委员会实施条例(EU) 2016/129，批准聚六亚甲基双胍盐酸盐(PHMB (1600; 1.8) )作为2、3、11生产型生物农药产品的活性物质

原文标题：Commission Implementing Regulation (EU) 2016/125 of 29 January 2016 approving PHMB (1600; 1.8) as an existing active substance for use in biocidal products for product-types 2, 3, 11 (Text with EEA relevance)

分类：03.50.20_植物健康

文件类型：二级立法 Regulation|条例

生效日期：2016-02-19

废止日期：2058-12-31

法规全文：查看欧盟官方文件

L_2016024EN.01000601.xml

30.1.2016

Official Journal of the European Union

L 24/6

COMMISSION IMPLEMENTING REGULATION (EU) 2016/125

of 29 January 2016

approving PHMB (1600; 1.8) as an existing active substance for use in biocidal products for product-types 2, 3, 11

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular the third subparagraph of Article 89(1) thereof,

Whereas:

(1)	Commission Delegated Regulation (EU) No 1062/2014 (2) establishes a list of existing active substances to be evaluated for their possible approval for use in biocidal products. That list includes PHMB (1600; 1.8).

(2)

PHMB (1600; 1.8) has been evaluated for use in product-type 2, disinfectants and algaecides not intended for direct application to humans or animals, product-type 3, veterinary hygiene, and product-type 11, preservatives for liquid-cooling and processing systems, as defined in Annex V to Regulation (EU) No 528/2012.

(3)	France was designated as evaluating competent authority and submitted the assessment reports, together with its recommendations, on 8 October 2013 and 14 November 2013.

(4)	In accordance with Article 7(1)(b) of Delegated Regulation (EU) No 1062/2014, the opinions of the European Chemicals Agency were formulated on 17 June 2015 by the Biocidal Products Committee, having regard to the conclusions of the evaluating competent authority.

(5)	According to those opinions, biocidal products used for product-types 2, 3, and 11 and containing PHMB (1600; 1.8) may be expected to satisfy the requirements of Article 19(1)(b) of Regulation (EU) No 528/2012, provided that certain conditions concerning its use are complied with.

(6)	It is therefore appropriate to approve PHMB (1600; 1.8) for use in biocidal products for product-types 2, 3, and 11 subject to compliance with certain specifications and conditions.

(7)	The opinions conclude that the characteristics of PHMB (1600; 1.8) render it very persistent (vP) and toxic (T) in accordance with the criteria laid down in Annex XIII to Regulation (EC) No 1907/2006 of the European Parliament and of the Council (3).

(8)	PHMB (1600; 1.8) meets the conditions set out in point (d) of Article 10(1) of Regulation (EU) No 528/2012 and should therefore be considered a candidate for substitution.

(9)	Pursuant to Article 10(4) of Regulation (EU) No 528/2012, the approval of an active substance that is considered as a candidate for substitution should be for a period not exceeding 7 years.

(10)	Since PHMB (1600; 1.8) meets the criteria for being very persistent (vP) according to Annex XIII to Regulation (EC) No 1907/2006, treated articles treated with or incorporating PHMB (1600; 1.8) should be appropriately labelled when placed on the market.

(11)	A reasonable period should be allowed to elapse before an active substance is approved, in order to permit interested parties to take the preparatory measures necessary to meet the new requirements.

(12)	The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,

HAS ADOPTED THIS REGULATION:

Article 1

PHMB (1600; 1.8) is approved as an active substance for use in biocidal products for product-types 2, 3, and 11, subject to the specifications and conditions set out in the Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 29 January 2016.

For the Commission

The President

Jean-Claude JUNCKER

(1) OJ L 167, 27.6.2012, p. 1.

(2) Commission Delegated Regulation (EU) No 1062/2014 of 4 August 2014 on the work programme for the systematic examination of all existing active substances contained in biocidal products referred to in Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 294, 10.10.2014, p. 1).

(3) Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).

ANNEX

Common Name

IUPAC Name

Identification Numbers

Minimum degree of purity of the active substance (1)

Date of approval

Expiry date of approval

Product type

Specific conditions

PHMB (1600; 1.8) (polyhexamethylene biguanide hydrochloride with a mean number-average molecular weight (Mn) of 1600 and a mean polydispersity (PDI) of 1.8)

IUPAC Name:

CoPoly(bisiminoimidocarbonyl, hexamethylene hydrochloride), (iminoimidocarbonyl, hexamethylene hydrochloride)

EC No: n.a.

CAS No: 27083-27-8 and 32289-58-0

956 g/kg (calculated dry weight specification).

The active substance as manufactured is an aqueous solution of 20 % w/w of PHMB (1600; 1.8)

1 July 2017

30 June 2024

PHMB (1600; 1.8) is considered a candidate for substitution in accordance with Article 10(1)(d) of Regulation (EU) No 528/2012.

The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance.

The authorisations of biocidal products are subject to the following conditions.

(1)	For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means.

(2)	In view of the risks identified for human health and the environment, products shall not be authorised for the treatment of swimming pools, unless it can be demonstrated that risks can be reduced to an acceptable level.

(3)	In view of the risks identified for human health and the environment, products shall not be authorised for disinfection of medical equipment by dipping, unless it can be demonstrated that risks can be reduced to an acceptable level.

(4)	In view of the risks identified for human health, ready-to-use wipes shall not be authorised for non-professionals, unless it can be demonstrated that risks can be reduced to an acceptable level.

(5)

In view of the risks identified for human health, labels, and where provided, safety data sheets of ready-to-use wipes shall indicate that the use is restricted to areas not accessible to the general public, unless it can be demonstrated that risks can be reduced to an acceptable level by other means.

The placing on the market of treated articles is subject to the following condition:

The person responsible for the placing on the market of a treated article treated with or incorporating PHMB (1600; 1.8) shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.

PHMB (1600; 1.8) is considered a candidate for substitution in accordance with Article 10(1)(d) of Regulation (EU) No 528/2012.

The authorisations of biocidal products are subject to the following conditions.

(1)	For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means.

(2)

In view of the risks identified for human health, products shall not be authorised for disinfection of equipment by dipping, unless it can be demonstrated that risks can be reduced to an acceptable level. In addition, in case products are authorised, in view of the risks identified for the environment, labels, and where provided, safety data sheets shall indicate that no release to sewage treatment plants shall be allowed, unless it can be demonstrated that risks can be reduced to an acceptable level by other means.

(3)

(4)

For products that may lead to residues in food or feed, the need to set new or to amend existing maximum residue levels (MRLs) in accordance with Regulation (EC) No 470/2009 of the European Parliament and of the Council (2) or Regulation (EC) No 396/2005 of the European Parliament and of the Council (3) shall be verified, and any appropriate risk mitigation measures shall be taken to ensure that the applicable MRLs are not exceeded.

The placing on the market of treated articles is subject to the following condition:

PHMB (1600; 1.8) is considered a candidate for substitution in accordance with Article 10(1)(d) of Regulation (EU) No 528/2012.

The authorisations of biocidal products are subject to the following conditions.

(1)	For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means.

(2)

In view of the risks identified for human health, labels and, where provided, safety data sheets shall indicate that loading of product into the cooling system shall be automated, that the pump shall be rinsed before cleaning and that appropriate personal protective equipment shall be worn during the cleaning phase, unless it can be demonstrated that risks can be reduced to an acceptable level by other means.

(3)

In view of the risks identified for water, sediments and soil, labels and, where provided, safety data sheets shall indicate that disposal of preserved liquids following drainage of the closed recirculating system shall be handled as hazardous waste, unless it can be demonstrated at product authorisation that risks to the environment can be reduced to an acceptable level by other means.

The placing on the market of treated articles is subject to the following condition.

(1) The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market (OJ L 123, 24.4.1998, p. 1). The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance.

(2) Regulation (EC) No 470/2009 of the European Parliament and of the Council of 6 May 2009 laying down Community procedures for the establishment of residue limits of pharmacologically active substances in foodstuffs of animal origin, repealing Council Regulation (EEC) No 2377/90 and amending Directive 2001/82/EC of the European Parliament and of the Council and Regulation (EC) No 726/2004 of the European Parliament and of the Council (OJ L 152, 16.6.2009, p. 11).

(3) Regulation (EC) No 396/2005 of the European Parliament and of the Council of 23 February 2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC (OJ L 70, 16.3.2005, p. 1).

附件:

P020171220015640907547.pdf