大连标准化公共服务平台|国际技术法规

委员会实施决定(EU) 2015/2119，为人造板的生产，根据欧洲议会和理事会指令2010/75/EU制定最佳可行技术(BAT)的结论(通报文件号C(2015) 8062)

技术法规类型：欧盟Eurlex法规来源：tbtmap

EURLEX ID：32015D2119

OJ编号：OJ L 306, 24.11.2015, p. 31-51

中文标题：委员会实施决定(EU) 2015/2119，为人造板的生产，根据欧洲议会和理事会指令2010/75/EU制定最佳可行技术(BAT)的结论(通报文件号C(2015) 8062)

原文标题：Commission Implementing Decision (EU) 2015/2119 of 20 November 2015 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the production of wood-based panels (notified under document C(2015) 8062) (Text with EEA relevance)

分类：15.10.20.30_大气污染监测

文件类型：二级立法 Decision|决定

生效日期：1001-01-01

废止日期：2058-12-31

法规全文：查看欧盟官方文件

L_2015306EN.01003101.xml

24.11.2015

Official Journal of the European Union

L 306/31

COMMISSION IMPLEMENTING DECISION (EU) 2015/2119

of 20 November 2015

establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the production of wood-based panels

(notified under document C(2015) 8062)

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (1), and in particular Article 13(5) thereof,

Whereas:

(1)

The Commission established a forum composed of representatives of Member States, the industries concerned and non-governmental organisations promoting environmental protection by Decision of 16 May 2011 establishing a forum for the exchange of information pursuant to Article 13 of Directive 2010/75/EU on industrial emissions (2).

(2)	In accordance with Article 13(4) of Directive 2010/75/EU, the Commission obtained the opinion of that forum on the proposed content of the BAT reference document for the production of wood-based panels on 24 September 2014 and made it publicly available.

(3)

The BAT conclusions set out in the Annex to this Decision are the key element of that BAT reference document and lay down the conclusions on best available techniques, their description, information to assess their applicability, the emission levels associated with the best available techniques, associated monitoring, associated consumption levels and, where appropriate, relevant site remediation measures.

(4)

BAT conclusions are the reference for setting permit conditions for installations covered by Chapter II of Directive 2010/75/EU and competent authorities should set emission limit values that ensure that, under normal operating conditions, emissions do not exceed the emission levels associated with the best available techniques as laid down in the BAT conclusions.

(5)	The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 75(1) of Directive 2010/75/EU,

HAS ADOPTED THIS DECISION:

Article 1

The BAT conclusions for the production of wood-based panels, as set out in the Annex, are adopted.

Article 2

This Decision is addressed to the Member States.

Done at Brussels, 20 November 2015.

For the Commission

Karmenu VELLA

Member of the Commission

(1) OJ L 334, 17.12.2010, p. 17.

(2) OJ C 146, 17.5.2011, p. 3.

ANNEX

BAT CONCLUSIONS FOR THE PRODUCTION OF WOOD-BASED PANELS

SCOPE

GENERAL CONSIDERATIONS

DEFINITIONS AND ACRONYMS

1.1.

GENERAL BAT CONCLUSIONS

1.1.1.

Environmental management system

1.1.2.

Good housekeeping

1.1.3.

Noise

1.1.4.

Emissions to soil and groundwater

1.1.5.

Energy management and energy efficiency

1.1.6.

Odour

1.1.7.

Management of waste and residues

1.1.8.

Monitoring

1.2.

EMISSIONS TO AIR

1.2.1.

Channelled emissions

1.2.2.

Diffuse emissions

1.3.

EMISSIONS TO WATER

1.4.

DESCRIPTION OF TECHNIQUES

1.4.1.

Emissions to air

1.4.2.

Emissions to water

SCOPE

These BAT conclusions concern the activities specified in Section 6.1(c) of Annex I to Directive 2010/75/EU, namely:

—	production in industrial installations of one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day.

In particular, these BAT conclusions cover the following:

—	the manufacture of wood-based panels;

—	on-site combustion plants (including engines) generating hot gases for directly heated dryers;

—	the manufacture of impregnated paper with resins.

These BAT conclusions do not address the following activities and processes:

—	on-site combustion plants (including engines) not generating hot gases for directly heated dryers;

—	the lamination, lacquering or painting of raw board.

Other reference documents which are relevant for the activities covered by these BAT conclusions are the following:

Reference document	Subject
Monitoring of Emissions to air and water from IED installations (ROM)	Monitoring of emissions to air and water
Large Combustion Plants (LCP)	Combustion techniques
Waste Incineration (WI)	Waste incineration
Energy Efficiency (ENE)	Energy efficiency
Waste Treatment (WT)	Waste treatment
Emissions from Storage (EFS)	Storage and handling of materials
Economics and Cross-Media Effects (ECM)	Economics and cross-media effects of techniques
Large Volume Organic Chemical industry (LVOC)	Production of melamine, urea-formaldehyde resins and methylene diphenyl diisocyanate

GENERAL CONSIDERATIONS

BEST AVAILABLE TECHNIQUES

The techniques listed and described in these BAT conclusions are neither prescriptive nor exhaustive. Other techniques may be used that ensure at least an equivalent level of environmental protection.

Unless stated otherwise, the BAT conclusions are generally applicable.

EMISSION LEVELS ASSOCIATED WITH BAT (BAT-AELs) FOR EMISSIONS TO AIR

Unless stated otherwise, the BAT-AELs for emissions to air given in these BAT conclusions refer to concentrations expressed as mass of emitted substance per volume of waste gas under standard conditions (273,15 K, 101,3 kPa) and on a dry basis, expressed in the unit mg/Nm3.

The reference oxygen levels are the following:

Emission source	Reference oxygen levels
Directly heated PB or directly heated OSB dryers alone or combined with the press	18 % oxygen by volume
All other sources	No correction for oxygen