HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"L 350/8
EN
Official Journal of the European Union
20.12.2012
COUNCIL REGULATION (EU) No 1232/2012
of 17 December 2012
amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff
duties on certain agricultural, fishery and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
to Regulation (EU) No 1344/2011 and reinserted in that
list with new time limits for a mandatory review.
Having regard to the Treaty on the Functioning of the European
Union, and in particular Article 31 thereof,
(6) In
view
of
their
temporary
nature,
the
suspensions
listed
in Annex I to this Regulation should be reviewed system
atically, five years after their application or renewal.
Having regard to the proposal from the European Commission,
Moreover, closure of certain suspensions should be
warranted at any time, following a proposal of the
Commission on the basis of a review carried out on
initiative of the Commission or at the request of one
Whereas:
or more Member States, on the grounds that the
suspensions are no longer in the Union’s interest to be
maintained, or due to technical product developments,
changed circumstances or economic trends on the
(1)
It is in the interest of the Union to suspend totally the
market.
autonomous Common Customs Tariff duties on certain
new products which are not currently listed in the Annex
to Council Regulation (EU) No 1344/2011 ( 1 ).
(7)
Since it is necessary that the suspensions laid down in
this Regulation take effect from 1 January 2013, this
Regulation should apply from the same date and enter
(2)
It is no longer in the interest of the Union to maintain
into force immediately upon its publication in the Official
the suspension of autonomous Common Customs Tariff
Journal of the European Union,
duties for 39 of the products which are currently listed in
the Annex to Regulation (EU) No 1344/2011.
Accordingly those products should be deleted.
HAS ADOPTED THIS REGULATION:
(3) It
is
necessary
to
modify
the
product
description
of
56
suspensions in the Annex to Regulation (EU) No
1344/2011 in order to take account of technical
Article 1
product developments and economic trends on the
market as well as linguistic adaptations. Moreover,
The Annex to Regulation (EU) No 1344/2011 is hereby
TARIC codes for four products should be changed. In
amended as follows:
addition, double classification is considered necessary
for three products, whereas for two products multiple
classification is no longer necessary.
(1) the rows for the products listed in Annex I to this Regu
lation are inserted;
(4) Those
suspensions
for
which
technical
modifications
are
necessary should be deleted from the list of suspensions
in the Annex to Regulation (EU) No 1344/2011 and
should be reinserted in that list with new product
(2) the rows for the products for which the CN and TARIC
descriptions or new CN or TARIC codes.
codes are set out in Annex II to this Regulation are deleted.
(5) A
number
of
products
were
reviewed
by
the
Commission
Article 2
in accordance with Article 2(2) and (3) of Regulation
(EU) No 1344/2011. It is in the interest of the Union
This Regulation shall enter into force on the day of its
to provide for a new mandatory review of those
publication in the Official Journal of the European Union.
products. The reviewed suspensions should therefore be
deleted from the list of suspensions set out in the Annex
( 1 ) OJ L 349, 31.12.2011, p. 1.
It shall apply from 1 January 2013.

---

EN
20.12.2012 Official
Journal
of
the
European
Union
L
350/9
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 17 December 2012.
For the Council
The President
S. ALETRARIS

---

L 350/10
EN
Official Journal of the European Union
20.12.2012
ANNEX I
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 2008 60 19
30
Sweet cherries containing added spirit, whether or not with a sugar 10 % ( 2 ) 30.6.2013
ex 2008 60 39
30
content of 9 % by weight, of a diameter of not more than 19,9 mm,
with stone, for use in chocolate products ( 1 )
ex 2008 93 91 20 Sweetened dried cranberries, excluding packing alone as processing, 0 % 31.12.2017
for the manufacture of products of food processing industries ( 3 )
ex 2008 99 49
70
Blanched vine leaves of the genus Karakishmish, in brine containing: 0 % 31.12.2017
ex 2008 99 99
11
— 14 % or more but not more 16 % (± 2 %) of salt,
— 0,2 % or more but not more than 0,3 % (± 0,1 %) of citric acid,
and
— 0,03 % or more but not more than 0,05 % (± 0,01 %) of sodium
benzoate
for use in the manufacture of stuffed vine leaves with rice ( 1 )
ex 2009 49 30 91 Pineapple
juice,
other
than
in
powder
form:
0 % 31.12.2014
— with a Brix value of more than 20 but not more than 67,
— a value of more than EUR 30 per 100 kg net weight,
— containing added sugars
used in the manufacture of products of food or drink industry ( 1 )
ex 2805 19 90 10 Lithium metal of a purity by weight of 99,7 % or more (CAS RN
0 % 31.12.2017
7439-93-2)
ex 2805 30 90
40
Rare earth metals, scandium and yttrium of a purity by weight of
0 % 31.12.2015
ex 2805 30 90
50
98,5 % or more
ex 2805 30 90
60
ex 2816 40 00 10 Barium
hydroxide
(CAS
RN
17194-00-2) 0
% 31.12.2017
ex 2823 00 00 10 Titanium
dioxide
(CAS
RN
13463-67-7):
0 % 31.12.2017
— of a purity by weight of 99,9 % or more,
— with an average grain-size of 1,2 μm or more but not more than
1,8 μm
— with a specific surface of 5,0 m 2 /g or more, but not more than
7,5 m 2 /g
ex 2823 00 00 20 Titanium
dioxide
(CAS
RN
13463-67-7)
with
a
purity
by
weight
of 0 % 31.12.2017
99,7 % or more and containing by weight:
— not more than 0,005 % of potassium and sodium combined
(expressed as elemental sodium and elemental potassium),
— not more than 0,01 % of phosphorus (expressed as elemental
phosphorus),
for use in the metallurgy ( 1 )
ex 2825 10 00 10 Hydroxylammonium
chloride
(CAS
RN
5470-11-1) 0
% 31.12.2017
ex 2825 60 00 10 Zirconium
dioxide
(CAS
RN
1314-23-4) 0
% 31.12.2017
ex 2835 10 00 10 Sodium
hypophosphite
monohydrate
(CAS
RN
10039-56-2) 0
% 31.12.2017
ex 2837 20 00 20 Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) 0
% 31.12.2017
ex 2839 19 00 10 Disodium
disilicate
(CAS
RN
13870-28-5) 0
% 31.12.2017

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/11
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 2841 80 00 10 Diammonium
wolframate
(ammonium
paratungstate)
(CAS
RN
0 % 31.12.2017
11120-25-5)
ex 2841 90 85 10 Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS 0 % 31.12.2017
RN 12190-79-3)
ex 2850 00 20 30 Titanium nitride with a particle size of not more than 250 nm (CAS 0 % 31.12.2017
RN 25583-20-4)
ex 2904 90 95 40 4-Chlorobenzenesulphonyl
chloride
(CAS
RN
98-60-2) 0
% 31.12.2017
ex 2905 19 00 70 Titanium
tetrabutanolate
(CAS
RN
5593-70-4) 0
% 31.12.2017
ex 2905 19 00 80 Titanium
tetraisopropoxide
(CAS
RN
546-68-9) 0
% 31.12.2017
ex 2908 99 00 40 4,5-Dihydroxynaphthalene-2,7-disulphonic
acid
(CAS
RN
148-25-4) 0
% 31.12.2017
ex 2912 49 00 20 4-Hydroxybenzaldehyde
(CAS
RN
123-08-0) 0
% 31.12.2017
ex 2914 19 90 20 Heptan-2-one
(CAS
RN
110-43-0) 0
% 31.12.2017
ex 2914 19 90 30 3-Methylbutanone
(CAS
RN
563-80-4) 0
% 31.12.2017
ex 2914 19 90 40 Pentan-2-one
(CAS
RN
107-87-9) 0
% 31.12.2017
ex 2914 39 00 30 Benzophenone
(CAS
RN
119-61-9) 0
% 31.12.2017
ex 2914 39 00 70 Benzil
(CAS
RN
134-81-6) 0
% 31.12.2017
ex 2914 39 00 80 4’-Methylacetophenone
(CAS
RN
122-00-9) 0
% 31.12.2017
ex 2914 50 00 60 2,2-Dimethoxy-2-phenylacetophenone
(CAS
RN
24650-42-8) 0
% 31.12.2017
ex 2914 50 00 70 16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2) 0
% 31.12.2017
ex 2915 90 70 75 2,2-Dimethylbutyryl
chloride
(CAS
RN
5856-77-9) 0
% 31.12.2017
ex 2916 12 00 60 Octadecyl
acrylate
(CAS
RN
4813-57-4) 0
% 31.12.2017
ex 2916 39 90 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7) 0
% 31.12.2017
ex 2916 39 90 75
m-Toluic acid (CAS RN 99-04-7) 0
% 31.12.2017
ex 2916 39 90 85 (2,4,5-Trifluorophenyl)acetic
acid
(CAS
RN
209995-38-0) 0
% 31.12.2017
ex 2917 19 10 20 Diethyl
malonate
(CAS
RN
105-53-3) 0
% 31.12.2017
ex 2918 29 00 70 Pentaerythritol
tetrakis(3-(3,5-di-tert-butyl-4-
0 % 31.12.2017
hydroxyphenyl)propionate) (CAS RN 6683-19-8)

---

L 350/12
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 2918 29 00 80 Butyl
3,5-bis(1,1-dimethylethylene)-4-hydroxybenzenepropanoate 0 % 31.12.2017
(CAS RN 52449-44-2)
ex 2920 19 00 10 Fenitrothion
(ISO)
(CAS
RN
122-14-5) 0
% 31.12.2013
ex 2921 19 60 10 2-(N,N-Diethylamino)ethyl chloride hydrochloride
0 % 31.12.2017
(CAS RN 869-24-9)
ex 2921 30 99 30 1,3-Cyclohexanedimethanamine
(CAS
RN
2579-20-6) 0
% 31.12.2015
ex 2921 42 00 86 2,5-Dichloroaniline of a purity by weight of 99,5 % or more
0 % 31.12.2017
(CAS RN 95-82-9)
ex 2921 42 00 87
N-Methylaniline (CAS RN 100-61-8) 0
% 31.12.2017
ex 2921 42 00 88 3,4-Dichloroaniline-6-sulphonic
acid
(CAS
RN
6331-96-0) 0
% 31.12.2017
ex 2921 43 00 80 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) 0
% 31.12.2017
ex 2921 49 00 85 4-Isopropylaniline
(CAS
RN
99-88-7) 0
% 31.12.2017
ex 2921 59 90 30 3,3’-Dichlorobenzidine
dihydrochloride
(CAS
RN
612-83-9) 0
% 31.12.2017
ex 2921 59 90 60 (2R,5R)-1,6-Diphenylhexane-2,5-diamine
dihydrochloride
0 % 31.12.2017
(CAS RN 1247119-31-8)
ex 2922 49 85 20 3-Amino-4-chlorobenzoic
acid
(CAS
RN
2840-28-0) 0
% 31.12.2017
ex 2922 49 85 60 Ethyl-4-dimethylaminobenzoate
(CAS
RN
10287-53-3) 0
% 31.12.2017
ex 2924 19 00 80 Tetrabutylurea
(CAS
RN
4559-86-8) 0
% 31.12.2017
ex 2924 29 98 51 Methyl
2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate 0 % 31.12.2017
(CAS RN 59673-82-4)
ex 2924 29 98 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide
0 % 31.12.2017
(CAS RN 74441-06-8)
ex 2924 29 98 86 Anthranilamide
of
a
purity
by
weight
of
99,5
%
or
more
(CAS
RN 0 % 31.12.2017
88-68-6)
ex 2925 19 95 20 4,5,6,7-Tetrahydroisoindole-1,3-dione
(CAS
RN
4720-86-9) 0
% 31.12.2017
ex 2925 19 95 30 N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0
% 31.12.2017
ex 2926 90 95 18 Methyl
cyanoacetate
(CAS
RN
105-34-0) 0
% 31.12.2017
ex 2927 00 00 80 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic
acid
(CAS
RN 0 % 31.12.2017
51867-77-7)
ex 2928 00 90 75 Metaflumizone
(ISO)
(CAS
RN
139968-49-3) 0
% 31.12.2016
ex 2928 00 90 80 Cyflufenamid
(ISO)
(CAS
RN
180409-60-3) 0
% 31.12.2013
ex 2928 00 90 85 Daminozide
(ISO)
with
a
purity
by
weight
of
99
%
or
more
(CAS
RN 0 % 31.12.2016
1596-84-5)
ex 2930 20 00 10 Prosulfocarb
(ISO)
(CAS
RN
52888-80-9) 0
% 31.12.2017
ex 2930 90 99 66 Diphenyl
sulphide
(CAS
RN
139-66-2) 0
% 31.12.2017

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/13
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 2930 90 99 67 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic
acid
(CAS
RN 0 % 31.12.2013
120100-05-2)
ex 2930 90 99 68 Clethodim
(ISO)
(CAS
RN
99129-21-2) 0
% 31.12.2017
ex 2930 90 99 71 Triphenylsulphonium
chloride
(CAS
RN
4270-70-6) 0
% 31.12.2013
ex 2930 90 99 83 Methyl-p-tolyl sulphone (CAS RN 3185-99-7) 0
% 31.12.2017
ex 2931 90 90 14 Sodium
diisobutyldithiophosphinate
(CAS
RN
13360-78-6)
in
an 0 % 31.12.2017
aqueous solution
ex 2932 20 90 20 Ethyl
6’-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9’-xanthene]- 0 % 31.12.2017
2’-carboxylate (CAS RN 154306-60-2)
ex 2932 20 90 40
(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9) 0
% 31.12.2017
ex 2933 19 90 40 Edaravone
(INN)
(CAS
RN
89-25-8) 0
% 31.12.2013
ex 2933 19 90 80 3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic
0 % 31.12.2017
acid (CAS RN 119-17-5)
ex 2933 29 90 40 Triflumizole
(ISO)
(CAS
RN
68694-11-1) 0
% 31.12.2013
ex 2933 39 99 12 2,3-Dichloropyridine
(CAS
RN
2402-77-9) 0
% 31.12.2017
ex 2933 39 99 18 6-Chloro-3-nitropyridin-2-ylamine
(CAS
RN
27048-04-0) 0
% 31.12.2017
ex 2933 39 99 55 Pyriproxyfen
(ISO)
of
a
purity
by
weight
of
97
%
or
more
(CAS
RN 0 % 31.12.2014
95737-68-1)
ex 2933 59 95 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine 0 % 31.12.2017
hydrochloride (1:1) (CAS RN 762240-92-6)
ex 2933 69 80 55 Terbutryn
(ISO)
(CAS
RN
886-50-0) 0
% 31.12.2015
ex 2933 79 00 30 5-Vinyl-2-pyrrolidone
(CAS
RN
7529-16-0) 0
% 31.12.2017
ex 2933 99 80 18 4,4’-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-
0 % 31.12.2017
phenylaniline] (CAS RN 67707-04-4)
ex 2933 99 80 22 (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN
0 % 31.12.2017
902146-43-4)
ex 2933 99 80 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621- 0 % 31.12.2017
49-3)
ex 2933 99 80 28
N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene- 0 % 31.12.2017
2-carboxamide (CAS RN 26848-40-8)
ex 2933 99 80 50 Metconazole
(ISO)
(CAS
RN
125116-23-6) 3,2
% 31.12.2013
ex 2933 99 80 89 Carbendazim (ISO) (CAS RN 10605-21-7) 0
% 31.12.2013
ex 2934 10 00 15 4-Nitrophenyl
thiazol-5-ylmethyl
carbonate
(CAS
RN
144163-97-3) 0
% 31.12.2017

---

L 350/14
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 2934 10 00 25 (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4- 0 % 31.12.2017
morpholinobutanoate oxalate (CAS RN 1247119-36-3)
ex 2934 10 00 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride
0 % 31.12.2017
(CAS RN 1185167-55-8)
ex 2934 20 80 40 1,2-Benzisothiazol-3(2H)-one
(Benzisothiazolinone
(BIT))
(CAS
RN 0 % 31.12.2017
2634-33-5)
ex 2934 30 90 10 2-Methylthiophenothiazine
(CAS
RN
7643-08-5) 0
% 31.12.2017
ex 2934 99 90 12 Morpholino
phosphorodiamidate
oligomers
(morpholino
0 % 31.12.2017
oligonucleotides) intended for genetic research ( 1 )
ex 2934 99 90 14 Ethyl
N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-
0 % 31.12.2017
yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-
2-yl-b-alaninate (CAS RN 872728-84-2)
ex 2934 99 90 15 Carboxin
(ISO)
(CAS
RN
5234-68-4) 0
% 31.12.2013
ex 2934 99 90 18 3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide
(CAS
RN
50292- 0 % 31.12.2017
95-0)
ex 2934 99 90 22 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol- 0 % 31.12.2017
3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)
ex 2934 99 90 23 Bromuconazole
(ISO)
with
a
purity
by
weight
of
96
%
or
more
(CAS 0 % 31.12.2016
RN 116255-48-2)
ex 2934 99 90 74 2-Isopropylthioxanthone
(CAS
RN
5495-84-1) 0
% 31.12.2017
ex 2934 99 90 83 Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 0 % 31.12.2014
103361-09-7)
ex 2934 99 90 84 Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 0 % 31.12.2014
153233-91-1)
ex 2942 00 00 10 N,N-Dimethyloctylamine – boron trichloride (1:1)
0 % 31.12.2017
(CAS RN 34762-90-8)
ex 3102 50 90 10 Natural
sodium
nitrate
(CAS
RN
7631-99-4) 0
% 31.12.2017
ex 3204 11 00 70 Dye
C.I.
Disperse
Red
343 0
% 31.12.2017
ex 3204 13 00 20 (2,2’-(3,3’-Dioxidobiphenyl-4,4’-diyldiazo)bis(6-(4-(3-
0 % 31.12.2017
(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-
1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II)
acetate lactate (CAS RN 159604-94-1)
ex 3204 15 00 10 Dye
C.I.
Vat
Orange
7
(C.I.
Pigment
Orange
43) 0
% 31.12.2017
ex 3204 17 00 30 Dye
C.I.
Pigment
Yellow
97 0
% 31.12.2017
ex 3204 17 00 80 Dye
C.I.
Pigment
Red
207 0
% 31.12.2017
ex 3204 17 00 85 Dye
C.I.
Pigment
Blue
61 0
% 31.12.2017
ex 3204 17 00 88 Dye
C.I.
Pigment
Violet
3 0
% 31.12.2017

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/15
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3204 19 00 84 Dye
C.I.
Solvent
Blue
67 0
% 31.12.2017
ex 3204 19 00 85 Dye
C.I.
Solvent
Red
HPR 0
% 31.12.2017
ex 3208 90 19
25
Tetrafluoroethylene copolymer in butylacetate solution with a
0 % 31.12.2017
ex 3208 90 91
20
content of solvent of 50 % (± 2 %) by weight
ex 3208 90 19 75 Acenaphthalene
copolymer
in
ethyl
lactate
solution 0
% 31.12.2017
ex 3402 13 00 20 Surfactant
containing
1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne- 0 % 31.12.2017
1,4-diyl ether, polymerised with oxirane, methyl terminated
ex 3802 90 00 11 Soda
flux
calcinated
diatomaceous
earth,
acid
washed,
for
use
as
filter 0 % 31.12.2017
aid in the manufacture of pharmaceutical and/or biochemical
products
ex 3808 91 90 10 Indoxacarb
(ISO)
and
its
(R) isomer, fixed on a support of silicon
0 % 31.12.2013
dioxide
ex 3808 91 90 50 Spodoptera
exigua nuclear polyhedrosis virus (SeNPV) in an aqueous 0 % 31.12.2013
glycerol suspension
ex 3808 91 90 60 Spinetoram
(ISO)
(CAS
RN
935545-74-7),
preparation
of
two
0 % 31.12.2017
spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-
ethoxy- spinosyn L)
ex 3808 92 90 10 Fungicide
in
the
form
of
a
powder,
containing
by
weight
65
%
or 0 % 31.12.2013
more but not more than 75 % of hymexazole (ISO), not put up for
retail sale
ex 3808 93 15 10 Preparation
based
on
a
concentrate
containing
by
weight
45
%
or 0 % 31.12.2017
more but not more than 55 % of the active herbicidal ingredient
Penoxsulam as an aqueous suspension
ex 3811 21 00 30 Additives for lubricating oils, containing mineral oils, consisting of 0 % 31.12.2017
calcium salts of reaction products of polyisobutylene substituted
phenol with salicylic acid and formaldehyde, used as a concentrated
additive for the manufacture of engine oils through a blending
process
ex 3811 21 00 40 Additives for lubricating oils, containing mineral oils, based on a
0 % 31.12.2017
mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-
26-9), used as a concentrated additive for the manufacture of engine
oils through a blending process
ex 3811 21 00 50 Additives for lubricating oils,
0 % 31.12.2017
— based on calcium C16-24 alkylbenzenesulphonates (CAS RN
70024-69-0),
— containing mineral oils,
used as a concentrated additive for the manufacture of engine oils
through a blending process

---

L 350/16
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3811 21 00 60 Additives for lubricating oils, containing mineral oils,
0 % 31.12.2017
— based on calcium polypropylenyl substituted benzenesulphonate
(CAS RN 75975-85-8) with a content by weight of 25 % or
more but not more than 35 %,
— with a total base number (TBN) of 280 or more but not more
than 320,
used as a concentrated additive for the manufacture of engine oils
through a blending process
ex 3811 21 00 70 Additives for lubricating oils,
0 % 31.12.2017
— containing polyisobutylene succinimide derived from reaction
products of polyethylenepolyamines with polyisobutenyl
succinic anhydride (CAS RN 84605-20-9),
— containing mineral oils,
— with a chlorine content by weight of 0,05 % or more but not
more than 0,25 %,
— with a total base number (TBN) of more than 20,
used as a concentrated additive for the manufacture of engine oils
through a blending process
ex 3811 29 00 10 Additives for lubricating oils, consisting of reaction products of
0 % 31.12.2017
diphenylamine with branched nonene (CAS RN 36878-20-3 and
CAS RN 27177-41-9), used as a concentrated additive for the
manufacture of engine oils through a blending process
ex 3811 29 00 20 Additives
for
lubricating
oils,
consisting
of
reaction
products
of
bis(2- 0 % 31.12.2017
methylpentan-2-yl)dithiophosphoric acid with propylene oxide,
phosphorus oxide, and amines with C12-14 alkyl chains, used as a
concentrated additive for the manufacture of engine oils through a
blending process
ex 3811 29 00 30 Additives for lubricating oils, consisting of reaction products of
0 % 31.12.2017
butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite
(CAS RN 93925-37-2), used as a concentrated additive for the
manufacture of engine oils through a blending process
ex 3811 29 00 40 Additives for lubricating oils, consisting of reaction products of 2- 0 % 31.12.2017
methyl-prop-1-ene with sulphur monochloride and sodium sulphide
(CAS RN 68511-50-2), with a chlorine content by weight of 0,05 %
or more but not more than 0,5 %, used as a concentrated additive
for the manufacture of engine oils through a blending process
ex 3811 29 00 50 Additives for lubricating oils, consisting of a mixture of N,N-
0 % 31.12.2017
dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12
and 18 carbon atoms (CAS RN 866259-61-2), used as a
concentrated additive for the manufacture of engine oils through a
blending process
ex 3811 90 00 30 Solution
of
a
(dimethylamino)methyl-derivative
of
polyisobutylene 0 % 31.12.2017
phenol, containing by weight 10 % or more but not more than
19,9 % petroleum naphtha
ex 3811 90 00 40 Solution
of
a
quaternary
ammonium
salt
based
on
polyisobutenyl 0 % 31.12.2017
succinimide, containing by weight 20 % or more but not more than
29,9 % 2-ethylhexanol
ex 3815 90 90 16 Initiator
based
on
dimethylaminopropyl
urea 0
% 31.12.2017

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/17
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3815 90 90 18 Oxidation
catalyst
with
an
active
ingredient
of
di[manganese
(1+)], 0 % 31.12.2017
1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN 1 , kN 4 ,
kN 7 )ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to
accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)
ex 3815 90 90 85 Catalyst
based
on
aluminosilicate
(zeolite),
for
the
alkylation
of
0 % 31.12.2017
aromatic hydrocarbons, for the transalkylation of alkylaromatic
hydrocarbons or for the oligomerisation of olefins ( 1 )
ex 3815 90 90 89 Rhodococcus
rhodocrous
J1
bacteria,
containing
enzymes,
suspended 0 % 31.12.2016
in a polyacrylamide gel or in water, for use as a catalyst in the
production of acrylamide by the hydration of acrylonitrile ( 1 )
ex 3824 90 97 33 Preparation,
containing:
0 % 31.12.2016
— trioctylphosphine oxide (CAS RN 78-50-2),
— dioctylhexylphosphine oxide (CAS RN 31160-66-4),
— octyldihexylphosphine oxide (CAS RN 31160-64-2) and
— trihexylphosphine oxide (CAS RN 9084-48-8)
ex 3824 90 97 35 Mixture
of:
0 % 31.12.2017
— 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide
(CAS
RN
50292-95-0) and
— ethyl-6’-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9’-
[9H]xanthene]-2’-carboxylate (CAS RN 154306-60-2)
ex 3824 90 97 36 Preparation
based
on
2,5,8,11-tetramethyl-6-dodecyn-5,8-diol
0 % 31.12.2017
ethoxylate (CAS RN 169117-72-0)
ex 3824 90 97 37 Liquid
crystal
mixture
for
use
in
the
manufacture
of
displays
( 1 ) 0
% 31.12.2017
ex 3824 90 97 38 Alkyl
carbonate-based
preparation,
also
containing
a
UV
absorber, 0 % 31.12.2017
for use in the manufacture of spectacle lenses ( 1 )
ex 3824 90 97 41 Preparation,
consisting
of:
0 % 31.12.2017
— dipropylene glycol
— tripropylene glycol
— tetrapropylene glycol and
— pentapropylene glycol
ex 3824 90 97 43
Nickel hydroxide, doped with 12 % or more but not more than 18 % 0 % 31.12.2017
by weight of zinc hydroxide and cobalt hydroxide, of a kind used to
produce positive electrodes for accumulators
ex 3824 90 97 44 Mixture
of
phytosterols,
not
in
the
form
of
powder,
containing
by 0 % 31.12.2017
weight:
— 75 % or more of sterols,
— not more than 25 % of stanols,
for use in the manufacture of stanols/sterols or stanol/sterol esters ( 1 )
ex 3824 90 97 70
Paste containing by weight 75 % or more, but not more than 85 % 0 % 31.12.2017
of copper, and also containing inorganic oxides, ethyl cellulose and a
solvent

---

L 350/18
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3824 90 97 78 Mixture of phytosterols derived from wood and wood based oils (tall 0 % 31.12.2017
oil), in the form of powder with a particle size not more than 300
μm, containing by weight:
— 60 % or more, but not more than 80 % of sitosterols,
— not more than 15 % of campesterols,
— not more than 5 % of stigmasterols,
— not more than 15 % of betasitostanols
ex 3903 90 90
35
Copolymer of α-methylstyrene and styrene, having a softening point 0 % 31.12.2013
ex 3911 90 99
43
of more than 113 °C
ex 3903 90 90 86 Mixture
containing
by
weight:
0 % 31.12.2013
— 45 % or more but not more than 65 % of polymers of styrene
— 35 % or more but not more than 45 % of poly(phenylene ether)
— not more than 10 % of other additives
and with one or more of the following special colour effects:
— metallic or pearlescent with a visual angular metamerism caused
by at least 0,3 % flake-based pigment
— fluorescent, as characterised by emitting light during absorption
of ultraviolet radiation
— bright white, as characterised by L* not less than 92 and b* not
more than 2 and a* between – 5 and 7 on the CIELab colour
scale
ex 3904 69 80 85 Copolymer
of
ethylene
with
chlorotrifluoroethylene,
whether
or
not 0 % 31.12.2017
modified with hexafluoroisobutylene, in powder, whether or not with
fillers
ex 3907 30 00 60 Polyglycerol
polyglycidyl
ether
resin
(CAS
RN
105521-63-9) 0
% 31.12.2017
ex 3907 60 80 50 Flexible
packages
(for
oxygen
sensitive
polymers)
manufactured
from 0 % 31.12.2017
a laminate of:
— not more than 75 μm of polyethylene,
— not more than 50 μm of polyamide,
— not more than 15 μm of polyethylene terephthalate and
— not more than 9 μm of aluminium
with a tensile strength of more than 70 N/15 mm and oxygen
transmission rate of less than 0,1 cm 3 /m 2 /24 hrs at 0,1 MPa
ex 3907 99 90 25 Copolymer,
containing
72
%
by
weight
or
more
of
terephthalic
acid 0 % 31.12.2017
and/or isomers thereof and cyclohexanedimethanol
ex 3907 99 90 60
Copolymer of terephthalic acid and isophthalic acid with bisphenol A 0
% 31.12.2017
ex 3908 90 00 60 Copolymer
consisting
of:
0 % 31.12.2017
— hexanedioic acid
— 12-aminododecanoic acid
— hexahydro-2H-azepin-2-one, and
— 1,6-hexanediamine
ex 3909 40 00 20 Powder
of
thermosetting
resin
in
which
magnetic
particles
have
been 0 % 31.12.2015
evenly distributed, for use in the manufacture of ink for
photocopiers, fax machines, printers and multifunction devices ( 1 )
ex 3909 40 00 30 Mixture
of:
0 % 31.12.2017
— alkylphenol — formaldehyde resin, whether or not brominated,
and
— zinc oxide

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/19
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3910 00 00 50 Silicone
based
pressure
sensitive
adhesive
in
solvent
containing
0 % 31.12.2017
copoly(dimethylsiloxane/diphenylsiloxane) gum
ex 3911 90 19 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in 0 % 31.12.2017
an aqueous solution of sodium hydroxide
ex 3911 90 99 53 Hydrogenated
polymer
of
1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-
0 % 31.12.2017
dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-
indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN
503442-46-4)
ex 3911 90 99 57 Hydrogenated
polymer
of
1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-
0 % 31.12.2017
dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-
fluorene (CAS RN 503298-02-0)
ex 3919 10 80
43
Ethylene vinyl acetate film:
0 % 31.12.2014
ex 3919 90 00
26
— of a thickness of 100 μm or more,
— coated on one side with an acrylic pressure sensitive or UV-
sensitive adhesive and a polyester liner
ex 3919 10 80
45
Reinforced polyethylene foam tape, coated on both sides with an
0 % 31.12.2017
ex 3919 90 00
45
acrylic micro channelled pressure sensitive adhesive and on one side
a liner, with an application thickness of 0,38 mm or more but not
more than 1,53 mm
ex 3919 10 80
55
Acrylic foam tape, covered on one side with a heat activatable
0 % 31.12.2017
ex 3919 90 00
53
adhesive or an acrylic pressure sensitive adhesive and on the other
side with an acrylic pressure sensitive adhesive and a release sheet, of
a peel adhesion at an angle of 90 o of more than 25 N/cm (as
determined by the ASTM D 3 330 method)
ex 3919 10 80
85
Poly(vinyl chloride) or polyethylene or any other polyolefine film:
0 % 31.12.2014
ex 3919 90 00
28
— of a thickness of 65 μm or more,
— coated on one side with an acrylic UV-sensitive adhesive and a
polyester liner
ex 3919 90 00 25 Film consisting of a multi-layer construction of poly(ethylene
0 % 31.12.2017
terephthalate) and copolymer of butylacrylate and
methylmethacrylate, coated on one side with an acrylic abrasion
resistant coating incorporating nanoparticles of antimony tin oxide
and carbon black, and on the other side with an acrylic pressure
sensitive adhesive and a silicone-coated poly(ethylene terephthalate)
protective liner
ex 3919 90 00
47
Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol 0 % 31.12.2017
ex 9001 20 00
40
film, supported on either side by a triacetyl cellulose film, with a
pressure sensitive adhesive and release film on one side

---

L 350/20
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 3920 10 40 30 Co-extruded
seven
to
nine
layered
film
predominately
of
copolymers 0 % 31.12.2017
of ethylene or functionalised polymers of ethylene, consisting of:
— a tri-layer barrier with a core layer predominantly of ethylene
vinyl alcohol covered on either side with a layer predominantly
of cyclic olefin polymers,
— covered on either side with two or more layers of polymeric
material,
and having an overall total thickness of not more than 110 μm
ex 3920 20 29
55
Co-extruded seven to nine layered film predominately of copolymers 0 % 31.12.2017
ex 3920 20 80
93
of propylene, consisting of:
— a tri-layer barrier with a core layer predominantly of ethylene
vinyl alcohol covered on either side with a layer predominantly
of cyclic olefin polymers,
— covered on either side with two or more layers of polymeric
material,
and having an overall total thickness of not more than 110 μm
ex 3920 20 29 94 Co-extruded
trilayer
film,
0 % 31.12.2016
— each layer containing a mixture of polypropylene and
polyethylene,
— containing not more than 3 % by weight of other polymers,
— whether or not containing titanium dioxide in the core layer,
— of an overall thickness of not more than 70 μm
ex 3920 51 00 40 Sheets
of
polymethylmethacrylate
conforming
to
standard
EN
4
366 0 % 31.12.2013
(MIL-PRF-25690)
ex 3920 62 19 42
Poly(ethylene terephthalate) film, of a thickness of 18μm or more but 0 % 31.12.2013
not more than 25 μm, having:
— a shrinkage of 3,4 (± 0,1) % in the machine direction (as
determined by the ASTM D 1204 method at 190 °C for 20
min) and
— a shrinkage of 0,3 (± 0,2) % in the transverse direction (as
determined by the ASTM D 1204 method at 190 °C for 20 min)
ex 3920 62 19 81 Poly(ethylene
terephthalate)
film
of
a
thickness
of
not
more
than
20 0 % 31.12.2017
μm, coated on both sides with a gas barrier layer consisting of a
polymeric matrix in which silica has been dispersed and of a
thickness of not more than 2 μm
ex 3920 79 90 10 Cellulose
acetyl
butyrate
film,
whether
or
not
combined
with
a
0 % 31.12.2013
polycarbonate layer, of a thickness of not more than 0,81 mm
containing a micro-louvre with a typical viewing angle of 30 degrees
measured on each side of the surface normal
ex 3920 92 00 30 Polyamide film of a thickness of not more than 20 μm, coated on 0 % 31.12.2013
both sides with a gas barrier layer which consists of a polymeric
matrix in which silica has been dispersed and of a thickness of not
more than 2 μm
ex 5407 10 00 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6
0 % 31.12.2017
and weft filament yarns of polyamide-6,6, polyurethane and a
copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis
(phenyleneamine)

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/21
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 5603 11 10
20
Non-wovens, not weighing more than 20 g/m 2 , containing
0 % 31.12.2017
ex 5603 11 90
20
spunbonded and meltblown filaments put together in a sandwich
way with the two outer layers containing fine endless filaments (not
less than 10 μm but not more than 20 μm in diameter) and the
inner layer containing super-fine endless filaments (not less than 1
μm but not more than 5 μm in diameter), for the manufacture of
napkins and napkin liners for babies and similar sanitary napkins ( 1 )
ex 5603 12 90 50 Non-woven:
0 % 31.12.2017
— weighing 30 g/m 2 or more, but not more than 60 g/m 2 ,
— containing fibres of polypropylene or of polypropylene and
polyethylene,
— whether or not printed, with:
— on one side, 65 % of the total surface area having circular
bobbles of 4 mm in diameter, consisting of anchored, elevated
un-bonded curly fibres, suitable for the engagement of extruded
hook materials, and the remaining 35 % of the surface area being
bonded,
— and on other side a smooth untextured surface,
for use in the manufacture of napkins and napkin liners for babies
and similar sanitary articles ( 1 )
ex 5603 12 90
70
Non-wovens of polypropylene,
0 % 31.12.2013
ex 5603 13 90
70
— with a melt blown layer, laminated on each side with
ex 5603 92 90
40
spunbonded filaments of polypropylene,
ex 5603 93 90
10
— with a weight of not more than 150 g/m 2 ,
— in the piece or simply cut into squares or rectangles, and
— not impregnated
ex 5603 92 90
70
Non-wovens, consisting of multiple layers of a mixture of meltblown 0 % 31.12.2013
ex 5603 94 90
40
fibres and staple fibres of polypropylene and polyester, whether or
not laminated on one side or on both sides with spunbonded
filaments of polypropylene
ex 5603 92 90
80
Non-woven polyolefin fabric, consisting of an elastomeric layer,
0 % 31.12.2016
ex 5603 93 90
50
laminated on each side with polyolefin filaments:
— a weight of 25 g/m 2 or more but not more than 150 g/m 2 ,
— in the piece or simply cut into squares or rectangles,
— not impregnated,
— with cross-directional or machine-directional stretch properties
for use in the manufacture of infant/child care products ( 1 )
ex 6909 19 00 15 Ceramic
ring
with
rectangular
transversal
section
having
an
external 0 % 31.12.2017
diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more
than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of
10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm
(+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm
(± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or
more, containing by weight:
— 90 % (± 1,5 %) of aluminium oxide
— 7 % (± 1 %) of titanium oxide

---

L 350/22
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 7005 10 30 10 Float
glass:
0 % 31.12.2017
— of a thickness of 4,0 mm or more but not more than 4,2 mm,
— with a light transmission of 91 % or more measured using a D-
type light source,
— coated on one surface with a fluorine doped tin dioxide reflective
layer
ex 7019 12 00
05
Rovings ranging from 1 980 to 2 033 tex, composed of continuous 0 % 31.12.2013
ex 7019 12 00
25
glass filaments of 9 μm (± 0,5 μm)
ex 7019 19 10 15 S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from 0 % 31.12.2017
continuous spun-glass filaments with fibres of a diameter of 9 μm
(– 1 μm/+ 1,5 μm)
ex 7326 90 98 40 TV
pedestal
stand
with
metal
upper
part
for
fixation
and
stabilisation 0 % 31.12.2016
of TV cabinet case/body
ex 7601 20 20
10
Sheets and billets of secondary aluminium alloy containing lithium 0
% 31.12.2017
ex 7601 20 80
10
ex 7604 29 10
10
Sheets and bars of aluminium-lithium alloys 0
% 31.12.2015
ex 7606 12 99
20
ex 7606 12 92
20
Aluminium and magnesium alloy strip:
0 % 31.12.2017
ex 7607 11 90
20
— in rolls,
— of a thickness of 0,14 mm or more but not more than 0,40 mm,
— a width of 12,5 mm or more but not more than 359 mm,
— a tensile strength of 285 N/mm 2 or more, and
— an elongation at break of 1 % or more, and
containing by weight:
— 93,3 % or more of aluminium,
— 2,2 % or more but not more than 5 % of magnesium, and
— not more than 1,8 % of other elements
ex 7607 11 90 30 Laminated
aluminium
foil
with:
0 % 30.6.2013
— 99 % or more of aluminium,
— a silica and water glass free hydrophilic coating,
— a total thickness of not more than 0,120 mm,
— a tensile strength of 100 N/mm 2 or more (as determined by test
method ASTM E8), and
— an elongation at break of 1 % or more
ex 7607 20 90 10 Aluminium
laminated
film
of
a
total
thickness
of
not
more
than 0 % 31.12.2017
0,123 mm, comprising of a layer of aluminium of a thickness of not
more than 0,040 mm, polyamide and polypropylene base films, and
a protective coating against corrosion by hydrofluoric acid, for use in
the manufacture of lithium polymer batteries ( 1 )
ex 8102 10 00 10 Molybdenum
powder
with
0 % 31.12.2017
— a purity by weight of 99 % or more and
— a particle size of 1,0 μm or more, but not more than 5,0 μm

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/23
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8108 90 30 20 Bars, rods and wire of alloy of titanium and aluminium, containing 0 % 31.12.2017
by weight 1 % or more but not more than 2 % of aluminium, for use
in the manufacture of silencers and exhaust pipes of subheadings
8708 92 or 8714 10 00 ( 1 )
ex 8108 90 50 30 Alloy
of
titanium
and
silicon,
containing
by
weight
0,15
%
or
more 0 % 31.12.2017
but not more than 0,60 % of silicon, in sheets or rolls, for use in the
manufacture of:
— exhaust systems for internal combustion engines or
— tubes and pipes of subheading 8108 90 60 ( 1 )
ex 8108 90 50 40 Titanium-alloy
sheets
for
the
manufacture
of
structural
parts
of
0 % 31.12.2017
aircrafts ( 1 )
ex 8108 90 50 50 Plates,
sheets,
strips
and
foils
of
an
alloy
of
titanium,
copper
and 0 % 31.12.2017
niobium, containing by weight 0,8 % or more but not more than
1,2 % of copper and 0,4 % or more but not more than 0,6 % of
niobium
ex 8108 90 50 85 Plates,
sheets,
strip
and
foil
of
non-alloyed
titanium 0
% 31.12.2017
ex 8113 00 90 10 Carrier
plate
of
aluminium
silicon
carbide
(AlSiC-9)
for
electronic 0 % 31.12.2017
circuits
ex 8207 30 10 10 Set
of
transfer
and/or
tandem
press
tools
for
cold-forming,
pressing, 0 % 31.12.2017
drawing, cutting, punching, bending, calibrating, bordering and
throating of metal sheets, for use in the manufacture of frame parts
of motor vehicles ( 1 )
ex 8407 33 00
10
Spark-ignition reciprocating or rotary internal combustion piston
0 % 31.12.2017
ex 8407 90 80
10
engines, having a cylinder capacity of not less than 300 cm 3 and a
ex 8407 90 90
10
power of not less than 6 kW but not exceeding 20,0 kW, for the
manufacture of:
— self-propelled lawn mowers, with a seat of subheading
8433 11 51, and hand-operated lawn mowers of heading
8433 11 90,
— tractors of subheading 8701 90 11, whose main function is that
of a lawn mower,
— four stroke mowers with motor of a cylinder capacity of not less
than 300 cc of subheading 8433 20 10 or
— snowploughs and snow blowers of subheading 8430 20 ( 1 )
ex 8408 90 43
30
4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine
0 % 31.12.2017
ex 8408 90 45
20
having:
ex 8408 90 47
30
— a capacity of not more than 3 850 cm 3 , and
— a rated output of 15 kW or more but not more than 55 kW,
for use in the manufacture of vehicles of heading 8 427 ( 1 )

---

L 350/24
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8411 99 00 30 Wheel-shaped
gas
turbine
component
with
blades,
of
a
kind
used
in 0 % 31.12.2017
turbochargers:
— of a precision-cast nickel based alloy complying with standard
DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS
AISI:686,
— with a heat-resistance of not more than 1 100 °C;
— with a diameter of 30 mm or more, but not more than 80 mm;
— with a height of 30 mm or more, but not more than 50 mm
ex 8481 80 69 60 Four-way
reversing
valve
for
refrigerants,
consisting
of:
0 % 31.12.2017
— a solenoid pilot valve
— a brass valve body including valve slider and copper connections
with a working pressure up to 4,5 MPa
ex 8483 30 38 30 Cylindrical
bearing
housing:
0 % 31.12.2017
— of precision-cast grey cast iron complying with standard DIN EN
1561,
— with oil chambers,
— without bearings,
— with a diameter of 60 mm or more, but not more than 180 mm,
— with a height of 60 mm or more, but not more than 120 mm,
— whether or not with water chambers and connectors
ex 8501 31 00 70 DC
motors,
brushless,
with:
0 % 31.12.2017
— an external diameter of 80 mm or more, but not more than
100 mm,
— a supply voltage of 12 V,
— an output at 20 °C of 300 W or more, but not more than
550 W,
— a torque 20 °C of 2,90 Nm or more, but not more than
5,30 Nm,
— a rated speed at 20 °C of 600 rpm or more, but not more than
1 200 rpm,
— equipped with the rotor angle position sensor of resolver type or
Hall effect type,
of the kind used in power steering systems for cars
ex 8501 33 00
30
Electric drive for motor vehicles, with an output of not more than 0 % 31.12.2016
ex 8501 40 80
50
315 kW, with:
ex 8501 53 50
10
— an AC or DC motor whether or not with transmission,
— power electronics
ex 8501 62 00 30 Fuel
cell
system
0 % 31.12.2017
— consisting of at least phosphoric acid fuel cells,
— in a housing with integrated water management and gas
treatment,
— for permanent, stationary energy supply
ex 8504 31 80 20 Transformer
for
use
in
the
manufacture
of
inverters
in
LCD
0 % 31.12.2017
modules ( 1 )

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/25
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8504 31 80 40 Electrical
transformers:
0 % 31.12.2017
— with a capacity of 1 kVA or less
— without plugs or cables,
for internal use in the manufacture of set top boxes and TVs ( 1 )
ex 8504 40 82 40 Printed circuit board equipped with a bridge rectifier circuit and
0 % 30.6.2013
other active and passive components
— with two output connectors
— with two input connectors which are available and useable in
parallel
— able to switch between bright and dimmed operation mode
— with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 %
– 15 %) in bright operation mode, with an input voltage of 30 V
(± 4 V) in dimmed operation mode, or
— with an input voltage of 230 V (+ 20 % – 15 %) in bright
operation mode, with an input voltage of 160 V (± 15 %) in
dimmed operation mode, or
— with an input voltage of 120 V (15 % – 35 %) in bright operation
mode, with an input voltage of 60 V (± 20 %) in dimmed
operation mode
— with an input current reaching 80 % of its nominal value within
20 ms
— with an input frequency of 45 Hz or more, but not more than
65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions
— with an maximum inrush current overshoot of not more than
250 % of the input current
— with a period of the inrush current overshoot of not more than
100 ms
— with an input current undershoot of not less than 50 % of the
input current
— with a period of the inrush current undershoot of not more than
20 ms
— with a presettable output current
— with an output current reaching 90 % of its nominal pre-set value
within 50 ms
— with an output current reaching zero within 30 ms after removal
of the input voltage
— with an defined failure status in case of no-load or too-high load
(end-of-life function)
ex 8504 40 82 50 Transformer
in
a
housing
with
0 % 31.12.2017
— a rated power of not more than 30 W
— an input voltage of 90 V or more, but not more than 305 V
— an input frequency of 47 Hz or more, but not more than 63 Hz
— a constant current output of 350 mA or more, but not more
than 1 050 mA
— an inrush current of not more than 10 A
— an operating temperature range of – 20 °C or more, but not
more than + 65 °C,
suitable for driving LEDs
ex 8504 50 95 50 Solenoid
coil
with
0 % 31.12.2017
— a power consumption of not more than 6 W,
— an insulation resistance of more than 100 M ohms, and
— an insert hole of 11,4 mm or more, but not more than 11,8 mm

---

L 350/26
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8505 11 00 33 Permanent
magnets
consisting
of
an
alloy
of
neodymium,
iron
and 0 % 31.12.2013
boron, either in the shape of a rounded rectangle with measurements
of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc
with a diameter of not more than 90 mm, whether or not containing
a hole in the centre
ex 8505 11 00 50 Bars
specifically
shaped,
intended
to
become
permanent
magnets 0 % 31.12.2017
after magnetisation, containing neodymium, iron and boron, with
dimensions:
— a length of 15 mm or more but not more than 52 mm,
— a width of 5 mm or more but not more than 42 mm,
of a kind to be used in the manufacture of electric servomotors for
industrial automation
ex 8505 11 00 60 Rings,
tubes,
bushings
or
collars
made
from
an
alloy
of
neodymium, 0 % 31.12.2017
iron and boron, with
— a diameter of not more than 45 mm,
— a height of not more than 45 mm,
of a kind used in the manufacture of permanent magnets after
magnetisation
ex 8507 60 00 40 Batteries
of
ion-lithium
electric
accumulators
rechargeable
with:
0 % 31.12.2017
— a length of 1 203 mm or more, but not more than 1 297 mm,
— a width of 282 mm or more, but not more than 772 mm,
— a height of 792 mm or more, but not more than 839 mm,
— a weight of 260 kg or more, but not more than 293 kg,
— power of 22 kWh or 26 kWh, and
— constituted of 24 or 48 modules
ex 8507 60 00 50 Modules
for
the
assembly
of
batteries
of
ion
lithium
electric
0 % 31.12.2017
accumulators with:
— a length of 298 mm or more, but not more than 408 mm,
— a width of 33,5 mm or more, but not more than 209 mm,
— a height of 138 mm or more, but not more than 228 mm,
— a weight of 3,6 kg or more, but not more than 17 kg, and
— a power of 485 kWh or more, but not more than 2 158 kWh
ex 8507 60 00 55 Lithium-ion
accumulator
in
cylindrical
form,
with:
0 % 31.12.2017
— a base similar to an ellipse squeezed in the middle,
— a length of 49 mm or more (not including terminals),
— a width of 33,5 mm or more,
— a thickness of 9,9 mm or more,
— a rated capacity of 1,75 Ah or more, and
— a rated voltage of 3,7 V,
for the manufacture of rechargeable batteries ( 1 )
ex 8507 60 00 57 Lithium-ion
accumulator,
cuboid
in
shape,
with:
0 % 31.12.2017
— some of the corners rounded off,
— a length of 76 mm or more (not including terminals),
— a width of 54,5 mm or more,
— a thickness of 5,2 mm or more,
— a rated capacity of 3 100 mAh or more, and
— a rated voltage of 3,7 V,
for the manufacture of rechargeable batteries ( 1 )

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/27
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8507 90 80 70 Cut
plate
of
nickel-plated
copper
foil,
with:
0 % 31.12.2016
— a width of 70 mm (± 5 mm),
— a thickness of 0,4 mm (± 0,2 mm),
— a length of not more than 55 mm,
for use in the manufacture of lithium-ion electric vehicle batteries ( 1 )
ex 8518 29 95 30 Loudspeakers
of:
0 % 31.12.2017
— an impedance of 4 Ohm or more, but not more than 16 Ohm,
— a nominal power of 2 W or more, but not more than 20 W,
— with or without plastic bracket, and
— with or without electric cable fitted with connectors,
of a kind used for TV sets and video monitors manufacture
ex 8522 90 80 96 Hard
disk
drive,
for
incorporation
in
products
of
heading
8
521
( 1 ) 0
% 31.12.2017
ex 8528 59 40 20 Liquid
crystal
display
colour
video
monitor
having
a
DC
input
0 % 31.12.2013
voltage of 7 V or more but not more than 30 V, with a diagonal
measurement of the screen of 33,2 cm or less,
— either without housing, with back cover and mounting frame,
— or with a housing specially designed for mounting,
suitable for the incorporation into goods of Chapters 84 to 90
and 94
ex 8529 90 65 75 Modules comprising at least semiconductor chips for:
0 % 31.12.2017
— the generation of driving signals for pixel addressing, or
— driving addressing pixels
ex 8529 90 92 47 Area
image
sensors
(‘progressive
scan’
Interline
CCD-Sensor
or
0 % 31.12.2014
CMOS-Sensor) for digital video cameras in the form of analogue or
digital, monolithic integrated circuit with pixels of not more than
12 μm × 12 μm in monochromic version with microlenses applied to
each individual pixel (microlens array) or in polychromic version
with a colour filter, whether or not with a lenslet (micro lens) array
with one lenslet mounted on each individual pixel
ex 8529 90 92 50 Colour
LCD
display
panel
for
LCD
monitors
of
heading
8
528:
0 % 31.12.2015
— with a diagonal measurement of the screen of 14,48 cm or more
but not more than 31,24 cm,
— with backlight, micro-controller,
— with a CAN (Controller area network)-controller with LVDS
(Low-voltage differential signalling) interface and CAN/power
supply socket or with an APIX (Automotive Pixel Link) controller
with APIX interface,
— in a housing with or without a heat sink at the back of the
housing,
— without a signal-processing module,
for use in the manufacture of vehicles of chapter 87 ( 1 )
ex 8536 69 90 81 Pitch
connector
for
use
in
the
manufacture
of
LCD
television
0 % 31.12.2017
reception apparatus ( 1 )

---

L 350/28
EN
Official Journal of the European Union
20.12.2012
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 8536 69 90 87 D-subminiature
(D-sub)
type
connectors,
built
into
a
plastic
or
metal 0 % 31.12.2016
housing, with 15 pins in 3 rows, for use in the manufacture of
products falling within headings 8 521 and 8 528 ( 1 )
ex 8536 69 90 88 Secure
Digital
(SD),
CompactFlash,
‘Smart
Card’
and
64-
pin
PC-card 0 % 31.12.2017
female connectors, of a kind used for soldering on printed circuit
boards, for connecting electrical apparatus and circuits and switching
or protecting electrical circuits with a voltage of not more than
1 000 V
ex 8537 10 91 30 Data
processing
and
evaluation
vehicle
dashboard
control
module, 0 % 31.12.2017
operating through the CAN — bus protocol, containing at least:
— microprocessor relays,
— a stepper motor,
— Electrically Erasable Programmable Read-Only (EEPROM)
memory, and
— other passive components (such as connectors, diodes, voltage
stabiliser, resistors, capacitors, transistors),
with a voltage of 13,5 V
ex 8543 90 00 40 Part of an electrolysis device, consisting of a pan of nickel equipped 0 % 31.12.2017
with a wire mesh of nickel, fixed via ribs of nickel, and a pan of
titanium equipped with a wire mesh of titanium, fixed via ribs of
titanium, of which both pans are fixed together back to back
ex 8544 20 00
10
PET/PVC insulated flexible cable with:
0 % 31.12.2013
ex 8544 42 90
20
— a voltage of not more than 60 V,
ex 8544 49 93
20
— a current of not more than 1 A,
ex 8544 49 95
10
— a heat resistance of not more than 105 °C,
— individual wires of a thickness of not more than 0,1 mm
(± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),
— a distance between conductors of not more than 0,5 mm and
— a pitch (distance from centreline to centreline of conductors) of
not more than 1,25 mm
ex 8544 42 90 10 Data transmission cable capable of a bit rate transmission of 600
0 % 31.12.2013
Mbit/s or more, with:
— a voltage of 1,25 V (± 0,25 V)
— connectors fitted at one or both ends, at least one of which
contains pins with a pitch of 1 mm,
— outer screening shielding,
used solely for communication between LCD, PDP or OLED panel
and video processing electronic circuits
ex 8548 90 90 50 Filters
with
a
ferromagnetic
core,
used
to
suppress
high
frequency 0 % 31.12.2017
noise in electronic circuits, for the manufacture of TV sets and
monitors of heading 8528 ( 1 )
ex 8704 23 91 20 Motor chassis with a self-ignition capacity of at least 8 000 cm 3 ,
0 % 31.12.2017
fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of
at least 480 cm, not containing working machinery, to be built into
special purpose motor vehicles with a width of at least 300 cm ( 1 )

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/29
Rate of
Date
CN code TARIC Description
autonomous foreseen for
duty
mandatory
review
ex 9001 20 00 10 Material
consisting
of
a
polarising
film,
whether
or
not
on
rolls, 0 % 31.12.2017
supported on one or both sides by transparent material, whether or
not with an adhesive layer, covered on one side or on both sides
with a release film
ex 9001 90 00 75 Front
filter
comprising
glass
panels
with
special
printing
and
film 0 % 31.12.2017
coating, for use in the manufacture of plasma display modules ( 1 )
ex 9002 11 00 20 Lenses
0 % 31.12.2017
— measuring not more than 80 mm × 55 mm × 50 mm,
— with a resolution of 160 lines/mm or better, and
— with a zoom ratio of 18 times,
of a kind used for the production of visualisers or live image cameras
ex 9002 11 00 30 Lenses
0 % 31.12.2017
— measuring not more than 180 mm × 100 mm × 100 mm at a
maximum focal length of more than 200 mm,
— with a resolution of 130 lines/mm or better, and
— with a zoom ratio of 18 times
of a kind used for the production of visualisers or live image cameras
ex 9002 11 00 40 Lenses
0 % 31.12.2017
— measuring not more than 125 mm × 65 mm × 65 mm,
— with a resolution of 125 lines/mm or better, and
— with a zoom ratio of 16 times
of a kind used for the production of visualisers or live image cameras
ex 9002 11 00 70 Lenses
0 % 31.12.2017
— measuring not more than 180 mm × 100 mm × 100 mm at a
maximum focal length of more than 200 mm,
— with an etendue of 7 steradian mm 2 or better, and
— with a zoom ratio of 16 times
of a kind used for the production of visualisers or live image cameras
ex 9032 89 00 40 Digital
valve
controller
for
controlling
liquids
and
gases 0
% 31.12.2017
ex 9405 40 39 30 Electric
light
assembly
containing:
0 % 30.6.2013
— printed circuit boards and
— Light Emitting Diodes (LED)
for the manufacture of backlight units for flat TV sets ( 1 )
( 1 ) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1).
( 2 ) The specific additional duty is applicable.
( 3 ) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in
Article 308d of the Regulation (EEC) No 2454/93.

---

L 350/30
EN
Official Journal of the European Union
20.12.2012
ANNEX II
CN code TARIC
ex 2008 60 19 30
ex 2008 60 39 30
ex 2008 93 91 20
ex 2009 49 30 91
ex 2710 12 25 10
ex 2805 30 90 30
ex 2823 00 00 10
ex 2835 10 00 10
ex 2839 19 00 10
ex 2841 80 00 10
ex 2841 90 85 10
ex 2850 00 20 30
ex 2904 10 00 40
ex 2914 19 90 20
ex 2914 19 90 30
ex 2914 19 90 40
ex 2914 39 00 30
ex 2914 39 00 40
ex 2914 50 00 60
ex 2914 50 00 70
ex 2916 39 90 55
ex 2917 39 95 40
ex 2918 23 00 10
ex 2920 19 00 10
ex 2921 30 99 20
ex 2921 30 99 30
ex 2921 59 90 30
ex 2922 49 85 60

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/31
CN code TARIC
ex 2924 29 98 35
ex 2924 29 98 86
ex 2928 00 90 75
ex 2928 00 90 80
ex 2928 00 90 85
ex 2930 20 00 10
ex 2930 90 99 66
ex 2930 90 99 67
ex 2930 90 99 68
ex 2930 90 99 69
ex 2930 90 99 71
ex 2930 90 99 82
ex 2930 90 99 83
ex 2932 99 00 60
ex 2933 19 90 40
ex 2933 29 90 40
ex 2933 39 99 55
ex 2933 69 80 35
ex 2933 69 80 55
ex 2933 79 00 30
ex 2933 99 80 50
ex 2933 99 80 73
ex 2933 99 80 89
ex 2934 20 80 40
ex 2934 99 90 15
ex 2934 99 90 23
ex 2934 99 90 74
ex 2934 99 90 78
ex 2934 99 90 83
ex 2934 99 90 84
ex 3204 15 00 10

---

L 350/32
EN
Official Journal of the European Union
20.12.2012
CN code TARIC
ex 3204 17 00 30
ex 3204 17 00 75
ex 3208 90 19 75
ex 3208 90 91 10
ex 3402 13 00 20
ex 3808 91 90 10
ex 3808 91 90 50
ex 3808 92 90 10
ex 3808 93 15 10
ex 3808 93 27 20
ex 3815 19 90 41
ex 3815 90 90 16
ex 3815 90 90 85
ex 3815 90 90 89
ex 3824 90 97 33
ex 3824 90 97 36
ex 3824 90 97 37
ex 3824 90 97 38
ex 3824 90 97 44
ex 3824 90 97 47
ex 3824 90 97 70
ex 3824 90 97 78
ex 3901 10 10 10
ex 3901 20 90 30
ex 3903 90 90 35
ex 3903 90 90 86
ex 3906 10 00 10
ex 3907 99 90 60
ex 3909 40 00 20
ex 3910 00 00 50

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/33
CN code TARIC
ex 3911 90 19 30
ex 3919 10 80 45
ex 3919 10 80 55
ex 3919 90 00 25
ex 3919 90 00 26
ex 3919 90 00 28
ex 3919 90 00 45
ex 3919 90 00 47
ex 3919 90 00 53
ex 3919 90 00 55
ex 3920 20 29 94
ex 3920 51 00 10
ex 3920 51 00 40
ex 3920 62 19 41
ex 3920 62 19 43
ex 3920 62 19 80
ex 3920 62 19 82
ex 3920 79 90 10
ex 3920 92 00 30
ex 5407 10 00 10
ex 5603 11 10 20
ex 5603 11 90 20
ex 5603 12 90 50
ex 5603 12 90 70
ex 5603 13 90 70
ex 5603 92 90 40
ex 5603 92 90 70
ex 5603 92 90 80
ex 5603 93 90 10

---

L 350/34
EN
Official Journal of the European Union
20.12.2012
CN code TARIC
ex 5603 93 90 50
ex 5603 94 90 40
ex 7005 10 25 10
ex 7005 10 30 10
ex 7006 00 90 60
ex 7007 19 20 20
ex 7326 90 98 40
ex 7410 22 00 10
ex 7601 20 99 10
ex 7604 29 10 10
ex 7606 12 92 20
ex 7606 12 99 20
ex 7607 11 90 20
ex 7607 11 90 30
ex 7607 20 90 10
ex 8108 90 30 20
ex 8108 90 50 30
ex 8108 90 50 40
ex 8108 90 50 50
ex 8113 00 90 10
ex 8407 31 00 10
ex 8407 33 00 10
ex 8407 90 80 10
ex 8407 90 90 10
ex 8412 21 80 50
ex 8419 89 98 30
ex 8419 89 98 40
ex 8462 21 80 10
ex 8477 59 80 10
ex 8501 33 00 30

---

EN
20.12.2012 Official
Journal
of
the
European
Union L
350/35
CN code TARIC
ex 8501 40 80 50
ex 8501 53 50 10
ex 8504 31 80 20
ex 8504 40 82 40
ex 8505 11 00 33
ex 8507 90 80 70
ex 8522 90 80 96
ex 8528 59 40 20
ex 8529 90 49 10
ex 8529 90 65 75
ex 8529 90 65 80
ex 8529 90 92 46
ex 8529 90 92 47
ex 8529 90 92 50
ex 8529 90 92 60
ex 8536 69 90 81
ex 8536 69 90 87
ex 8540 91 00 95
ex 8543 90 00 40
ex 8544 42 90 10
ex 8544 49 93 20
ex 8704 23 91 20
ex 9001 20 00 10
ex 9001 20 00 40
ex 9001 90 00 75
ex 9032 10 89 20
ex 9032 89 00 40
ex 9405 40 39 30

---

Document Outline

• �

---