委员会实施决定2013/780/EU,减损理事会指令2000/29/EC条例13(1)(ii),此条例是关于源自美国的Quercus L., Platanus L.和Acer saccharum Marsh.的无树皮锯木(通报文件号C(2013) 9166)

技术法规类型:欧盟Eurlex法规 来源:tbtmap

EURLEX ID:32013D0780

OJ编号:OJ L 346, 20.12.2013, p. 61-64

中文标题:委员会实施决定2013/780/EU,减损理事会指令2000/29/EC条例13(1)(ii),此条例是关于源自美国的Quercus L., Platanus L.和Acer saccharum Marsh.的无树皮锯木(通报文件号C(2013) 9166)

原文标题:Commission Implementing Decision of 18 December 2013 providing for a derogation from Article 13(1)(ii) of Council Directive 2000/29/EC in respect of bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh. originating in the United States of America (notified under document C(2013) 9166)

分类:03.50.20_植物健康

文件类型:二级立法 Decision|决定

生效日期:0001-01-01

废止日期:2016-11-30

法规全文:查看欧盟官方文件

L_2013346EN.01006101.xml

20.12.2013

EN

Official Journal of the European Union

L 346/61


COMMISSION IMPLEMENTING DECISION

of 18 December 2013

providing for a derogation from Article 13(1)(ii) of Council Directive 2000/29/EC in respect of bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh. originating in the United States of America

(notified under document C(2013) 9166)

(2013/780/EU)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Council Directive 2000/29/EC of 8 May 2000 on protective measures against the introduction into the Community of organisms harmful to plants or plant products and against their spread within the Community (1), and in particular the second indent of Article 15(1) thereof,

Whereas:

(1)

Directive 2000/29/EC provides for protective measures against the introduction into the Union from third countries of organisms that are harmful to plants or plant products.

(2)

Bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh. originating in the United States of America and covered by one of the CN codes and the descriptions set out in Section I(6) of Part B of Annex V to Directive 2000/29/EC may not be introduced into the Union unless accompanied by a phytosanitary certificate as provided for in Article 13(1)(ii) of that Directive.

(3)

Directive 2000/29/EC allows for derogations from Article 13(1)(ii) in the case of wood, if equivalent safeguards are ensured by means of alternative documentation or marking.

(4)

The Commission has noted on the basis of information supplied by the United States of America that an official programme, the Kiln Drying Sawn Hardwood Lumber Certification Program, has been approved by the Animal and Plant Health Inspection Service, US Department of Agriculture and will be operated by the US National Hardwood Lumber Association (NHLA).

(5)

The Kiln Drying Sawn Hardwood Lumber Certification Program ensures that approved hardwood facilities in the US operate under the Kiln Drying Sawn Hardwood Standard. That Standard ensures that all parts of sawn hardwood lumber exported under that Program are kiln dried to less than 20 % moisture by weight as per kiln drying schedules and are bark-free.

(6)

That Standard also ensures that all kiln dried hardwood bundles are attached with an NHLA steel ID clip stamped with ‘NHLA ‘�KD‘�along with a unique number assigned to each bundle. Each number is listed on the corresponding Kiln Drying Hardwood Lumber Certificate (‘楥ertificate of Kiln Drying‘�.

(7)

Member States should therefore be authorised to allow for bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh. originating in the United States of America to be introduced into their territory when accompanied by a Certificate of Kiln Drying as an alternative to a phytosanitary certificate, provided that certain conditions are fulfilled.

(8)

The Commission should ensure that the United States of America makes available all technical information necessary to assess the functioning of the Program. In addition, Member States should continually assess the use of the NHLA ID clips and associated Certificate of Kiln Drying.

(9)

The derogation provided for in this Decision should be terminated if it is established that the specific conditions laid down in this Decision are not sufficient to prevent the introduction of harmful organisms into the Union or have not been complied with or there is evidence which could indicate that the Program is not functioning effectively.

(10)

The measures provided for in this Decision are in accordance with the opinion of the Standing Committee on Plant Health,

HAS ADOPTED THIS DECISION:

Article 1

By way of derogation from Article 13(1)(ii) of Directive 2000/29/EC, Member States shall be authorised to allow for the introduction into their territory of bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh., originating in the United States of America and covered by one of the CN codes and the descriptions set out in Section I(6) of Part B of Annex V to that Directive, without being accompanied by a phytosanitary certificate, provided such wood complies with the conditions set out in the Annex to this Decision.

Article 2

1. Member States shall inform the Commission and the other Member States in writing when they have made use of the derogation provided for in Article 1.

Member States that made use of the derogation shall provide the Commission and the other Member States before 15 July each year with information on the number of consignments imported in the previous year pursuant to Article 1 of this Decision and with a detailed report of all cases of interceptions as referred to in paragraph 2 of this Article.

2. Member States shall notify the Commission and the other Member States no later than two working days after the date of interception of each consignment introduced into their territory pursuant to Article 1 which does not comply with the conditions set out in the Annex.

3. The Commission shall request the United States of America to provide it with the technical information necessary to allow the Commission to assess the functioning of the Kiln Drying Sawn Hardwood Lumber Certification Program.

Article 3

This Decision shall expire on 30 November 2016.

Article 4

This Decision is addressed to the Member States.

Done at Brussels, 18 December 2013.

For the Commission

Tonio BORG

Member of the Commission


(1) OJ L 169, 10.7.2000, p. 1.


ANNEX

PART I

Conditions referred to in Article 1

The conditions referred to in Article 1 under which Member States are authorised to allow for the introduction into their territory of bark-free sawn wood of Quercus L., Platanus L. and Acer saccharum Marsh. originating in the United States of America and covered by one of the CN codes and the descriptions set out in Section I(6) of Part B of Annex V to Directive 2000/29/EC without being accompanied by a phytosanitary certificate, are the following:

(1)

the wood shall be manufactured at sawmills or treated at appropriate premises approved and audited by the US National Hardwood Lumber Association (NHLA) to participate in the Kiln Drying Sawn Hardwood Lumber Certification Program (‘the programme‘�;

(2)

the wood shall undergo kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule;

(3)

once the condition laid down in point (2) is fulfilled, a standard steel ID clip shall be affixed to each bundle by, or under the supervision of, the designated officer of the mill referred to in point (1). Each ID clip shall be stamped with ‘NHLA ‘�KD‘�along with a unique number assigned to each bundle;

(4)

in order to ensure that the conditions laid down in points (2) and (3) are fulfilled, the wood shall be subject to a checking system which is set up under the programme and which includes pre-shipment inspection and monitoring at the approved sawmills carried out by independent third party auditors qualified and authorised for that purpose. The Animal and Plant Health Inspection Service, US Department of Agriculture shall carry out occasional pre-shipment inspections and six-monthly audits of NHLA records and procedures relating to the programme, of the independent third party auditors and of the sawmills and other appropriate premises that participate in the programme;

(5)

the wood shall be accompanied by a standard ‘楥ertificate of Kiln Drying‘�which complies with the model set out in Part II of this Annex, and which is issued by a person or persons authorised to participate in the programme and is validated by an inspector of the NHLA. The Certificate of Kiln Drying shall be completed and shall include information on the amount of bark-free sawn wood in board feet and cubic metres. The certificate shall also specify the total number of bundles and each of the ID clip numbers assigned to those bundles.

PART II

Model of Certificate of Kiln Drying

Agreement No 07-8100-1173-MU

Cert #. xxxxx-xxxxx

CERTIFICATE OF KILN DRYING

Sawn Hardwood Lumber

Lumber Kiln Dried by

Consignee

Name of Company:

Name:

Address:

Address:

City/State/Zip:

City/State/Zip:

Phone:

Country:

Order #:

Port:

Invoice #:

Container #:

Customer PO#:

Certificate Standard: This certifies that the lumber described below is of the allowed genera Quercus sp. and/or Platanus sp. and/or the species Acer saccharum and/or Acer macrophyllum; and has met the treatment requirements of the Dry Kiln Operators Manual and is bark free.

Description of Consignment:

Botanical Name of wood:

List species, thickness, grade of various items contained in shipment:

Bundle Numbers

Clip ID Numbers

Board Footage

Cubic Meters

Totals:

# Bundles

BdFt

Cubic Meters:

(This document is issued under a program officially approved by the Animal, Plant, Health, and Inspection Service of the U.S. Department of Agriculture. The products covered by this document are subject to pre-shipment inspection by that Agency. No liability shall be attached to the U.S. Department of Agriculture or any representatives of the Department with respect to this certificate.)

AUTHORIZED PERSON RESPONSIBLE FOR CERTIFICATION

Name (print) _

Title _

I certify that the products described above satisfy the Kiln Drying requirements listed under Certificate Standard and are bark free.

Signature _

Date _

NATIONAL HARDWOOD LUMBER ASSOCIATION VALIDATION

Name (print)

Authorized signature

Title

Date

National Hardwood Lumber Association PO Box 34518 | Memphis, TN 38184-0518 | Ph. 901-377-1818 | Fax 901-347-0034 | www.nhla.com

PLEASE SIGN THIS FORM IN BLUE INK


附件:

P020171219477796290804.pdf

托管标准,您可以接收以下服务:

1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户;

2 随时在标准托管页面中查看到该条标准的最新状态;

3 若用户有在学习和科研中的需要,可以在标准托管页面中试阅标准;

4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持;

5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询;

6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务;

进入企业标准托管

您可以通过编辑查新模板,批量查询指定标准集的最新情况。我们会通过查询,向您展示您所查询标准的:

1. 准确的标准号及标准名称(我们通过人工智能技术对您提交的标准号进行自动纠正)

2. 标准的最新状态(现行、废止或未发布)

3. 若标准已废止并被新标准替代,会反馈被替代的标准

4. 若您已托管此标准,便可以实时跟踪这个标准的最新状态

标准查新 模板下载

您可以在这里检索全球超过140万条标准,支持上百个国内国际标准组织的标准查询。您也可以在这里检索国内各类国家、部委和地方的法律法规。

更多标准子库在持续建设中。

标准检索

标准资讯点击排行榜 全部

资讯标题点击

[[ n.title ]] [[ n.read ]]

大连标准化公共服务平台

版权:大连标准化研究院有限公司

地址:大连市中山区高原街56号

电话:0411-82740851

大连标准