Commission Decision

of 19 October 2009

amending Decisions 2006/679/EC and 2006/860/EC as regards technical specifications for interoperability relating to subsystems of the trans-European conventional and high-speed rail systems

(notified under document C(2009) 7787)

(Text with EEA relevance)

(2010/79/EC)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community [1], and in particular Article 6(1) thereof,

Having regard to the recommendation of the European Railway Agency (ERA-REC-38-2009-ERTMS) of 24 April 2009, on updating the Annex A of the TSI Control Command and Signalling for High Speed and Conventional Rail systems,

Whereas:

(1) Commission Decision 2006/679/EC of 28 March 2006 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system [2] laid down the technical specification for interoperability (TSI) relating to the control-command and signalling subsystem of the trans-European conventional rail system.

(2) Commission Decision 2006/860/EC of 7 November 2006 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system [3] laid down the TSI relating to the control-command and signalling subsystem of the trans-European high speed rail system.

(3) In accordance with Article 2 of Commission Decision 2008/386/EC of 23 April 2008 modifying Annex A to Decision 2006/679/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system and Annex A to Decision 2006/860/EC concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high-speed rail system [4], the ETCS specifications should be completed to include updated common test specifications.

(4) A number of technical documents referred to in Annex A to Decisions 2006/679/EC and 2006/860/EC must be updated to adapt them to technical progress.

(5) Decisions 2006/679/EC and 2006/860/EC should therefore be amended accordingly.

(6) The measures provided for in this Decision are in accordance with the opinion of the Railway Interoperability and Safety Committee, established in accordance with Article 29 of Directive 2008/57/EC,

HAS ADOPTED THIS DECISION:

Article 1

The list of mandatory specifications and the list of informative specifications set out in Annex A to Decision 2006/679/EC and in Annex A to Decision 2006/860/EC, are replaced by the list of mandatory specifications and the list of informative specifications contained in the Annex to this Decision. The footnotes referring to Decision 2002/731/EC in Annex H to the TSI attached to Decision 2006/679/EC and in Annex H to the TSI attached to Decision 2006/860/EC are deleted.

Article 2

This Decision shall apply from 1 April 2010.

Article 3

This Decision is addressed to the Member States.

Done at Brussels, 19 October 2009.

For the Commission

Antonio Tajani

Vice-President

[1] OJ L 191, 18.7.2008, p. 1.

[2] OJ L 284, 16.10.2006, p. 1.

[3] OJ L 342, 7.12.2006, p. 1.

[4] OJ L 136, 24.5.2008, p. 11.

--------------------------------------------------

ANNEX

LIST OF MANDATORY SPECIFICATIONS

Index No | Reference | Document name | Version |

1 | ERA/ERTMS/003204 | ERTMS/ETCS Functional Requirement Specification | 5.0 |

2 | Intentionally deleted | | |

3 | UNISIG SUBSET-023 | Glossary of Terms and Abbreviations | 2.0.0 |

4 | UNISIG SUBSET-026 | System Requirement Specification | 2.3.0 |

5 | UNISIG SUBSET-027 | FFFIS Juridical Recorder-Downloading Tool | 2.3.0 |

6 | UNISIG SUBSET-033 | FIS for Man-Machine Interface | 2.0.0 |

7 | UNISIG SUBSET-034 | FIS for the Train Interface | 2.0.0 |

8 | UNISIG SUBSET-035 | Specific Transmission Module FFFIS | 2.1.1 |

9 | UNISIG SUBSET-036 | FFFIS for Eurobalise | 2.4.1 |

10 | UNISIG SUBSET-037 | Euroradio FIS | 2.3.0 |

11 | Reserved 05E537 | Off line key management FIS | |

12 | UNISIG SUBSET-039 | FIS for the RBC/RBC Handover | 2.3.0 |

13 | UNISIG SUBSET-040 | Dimensioning and Engineering rules | 2.3.0 |

14 | UNISIG SUBSET-041 | Performance Requirements for Interoperability | 2.1.0 |

15 | ERA SUBSET-108 | Interoperability-related consolidation on TSI Annex A documents | 1.2.0 |

16 | UNISIG SUBSET-044 | FFFIS for Euroloop sub-system | 2.3.0 |

17 | Intentionally deleted | | |

18 | UNISIG SUBSET-046 | Radio In-fill FFFS | 2.0.0 |

19 | UNISIG SUBSET-047 | Track-side-Trainborne FIS for Radio In-Fill | 2.0.0 |

20 | UNISIG SUBSET-048 | Trainborne FFFIS for Radio In-Fill | 2.0.0 |

21 | UNISIG SUBSET-049 | Radio In-fill FIS with LEU/Interlocking | 2.0.0 |

22 | Intentionally deleted | | |

23 | UNISIG SUBSET-054 | Assignment of Values to ETCS variables | 2.0.0 |

24 | Intentionally deleted | | |

25 | UNISIG SUBSET-056 | STM FFFIS Safe Time Layer | 2.2.0 |

26 | UNISIG SUBSET-057 | STM FFFIS Safe Link Layer | 2.2.0 |

27 | UNISIG SUBSET-091 | Safety Requirements for the Technical Interoperability of ETCS in Levels 1 & 2 | 2.5.0 |

28 | Reserved | Reliability — Availability Requirements | |

29 | UNISIG SUBSET-102 | Test specification for Interface "k" | 1.0.0 |

30 | Intentionally deleted | | |

31 | UNISIG SUBSET-094 | UNISIG Functional Requirements for an On-board Reference Test Facility | 2.0.2 |

32 | EIRENE FRS | GSM-R Functional Requirements Specification | 7 |

33 | EIRENE SRS | GSM-R System Requirements Specification | 15 |

34 | A11T6001 12 | (MORANE) Radio Transmission FFFIS for EuroRadio | 12 |

35 | ECC/DC(02)05 | ECC Decision of 5 July 2002 on the designation and availability of frequency bands for railway purposes in the 876-880 and 921-925 MHz bands | |

36a | Intentionally deleted | | |

36b | Intentionally deleted | | |

36c | UNISIG SUBSET-074-2 | FFFIS STM Test cases document | 1.0.0 |

37a | Intentionally deleted | | |

37b | UNISIG SUBSET-076-5-2 | Test cases related to features | 2.3.1 |

37c | UNISIG SUBSET-076-6-3 | Test sequences | 2.3.1 |

37d | UNISIG SUBSET-076-7 | Scope of the test specifications | 1.0.2 |

37e | Intentionally deleted | | |

38 | 06E068 | ETCS marker board definition | 1.0 |

39 | UNISIG SUBSET-092-1 | ERTMS EuroRadio Conformance Requirements | 2.3.0 |

40 | UNISIG SUBSET-092-2 | ERTMS EuroRadio Test cases Safety Layer | 2.3.0 |

41 | Reserved UNISIG SUBSET 028 | JRU Test Specification | |

42 | Intentionally deleted | | |

43 | UNISIG SUBSET 085 | Test Specification for Eurobalise FFFIS | 2.2.2 |

44 | Reserved | Odometry FIS | |

45 | UNISIG SUBSET-101 | Interface "K" specification | 1.0.0 |

46 | UNISIG SUBSET-100 | Interface "G" specification | 1.0.1 |

47 | Reserved | Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System | |

48 | Reserved | Test specification for mobile equipment GSM-R | |

49 | UNISIG SUBSET-059 | Performance requirements for STM | 2.1.1 |

50 | UNISIG SUBSET-103 | Test specification for EUROLOOP | 1.0.0 |

51 | Reserved | Ergonomic aspects of the DMI | |

52 | UNISIG SUBSET-058 | FFFIS STM Application Layer | 2.1.1 |

53 | Reserved AEIF-ETCS-Variables-Manual | AEIF-ETCS-Variables-Manual | |

54 | Intentionally deleted | | |

55 | Reserved | Juridical recorder baseline requirements | |

56 | Reserved 05E538 | ERTMS Key Management Conformance Requirements | |

57 | Reserved UNISIG SUBSET-107 | Requirements on pre-fitting of ERTMS on-board equipment | |

58 | UNISIG SUBSET-097 | Requirements for RBC-RBC Safe Communication Interface | 1.1.0 |

59 | Reserved UNISIG SUBSET-105 | Requirements on pre-fitting of ERTMS track side equipment | |

60 | Reserved UNISIG SUBSET-104 | ETCS version management | |

61 | Reserved | GSM-R version management | |

62 | Reserved UNISIG SUBSET-099 | RBC-RBC Test specification for Safe Communication Interface | |

63 | UNISIG SUBSET-098 | RBC-RBC Safe Communication Interface | 1.0.0 |

LIST OF INFORMATIVE SPECIFICATIONS

Notes:

Type "1" specifications represent the current state of the work for the preparation of a mandatory specification still "reserved".

Type "2" specifications give additional information, justifying the requirements in mandatory specifications and providing help for their application.

Index B32 is intended to ensure unique references in the Annex A documents. As this is used for editorial purposes and to support future changes of documents referred only, it is not classified as a "Type" and not linked to a mandatory Annex A document.

Documents B25, B27, B28, B29 and B30 are applicable only for the GSM-R DMI. For the ETCS DMI only B34 applies.

Index No | Reference | Document name | Version | Type |

B1 | EEIG 02S126 | RAM requirements (chapter 2 only) | 6 | 2 (index 28) |

B2 | EEIG 97S066 | Environmental conditions | 5 | 2 (index A5) |

B3 | UNISIG SUBSET-074-1 | Methodology for testing FFFIS STM | 1.0.0 | 2 (index 36) |

B4 | EEIG 97E267 | ODOMETER FFFIS | 5 | 1 (index 44) |

B5 | O_2475 | ERTMS GSM-R QoS Test Specification | 1.0.0 | 2 |

B6 | UNISIG SUBSET-038 | Off-line Key Management FIS | 2.1.9 | 1 (index 11) |

B7 | UNISIG SUBSET-074-3 | FFFIS STM test specification traceability of test cases with Specific Transmission Module FFFIS | 1.0.0 | 2 (index 36) |

B8 | UNISIG SUBSET-074-4 | FFFIS STM Test Specification Traceability of testing the packets specified in the FFFIS STM Application Layer | 1.0.0 | 2 (index 36) |

B9 | UNISIG SUBSET 076-0 | ERTMS/ETCS Class 1, Test plan | 2.3.1 | 2 (index 37) |

B10 | UNISIG SUBSET 076-2 | Methodology to prepare features | 2.3.0 | 2 (index 37) |

B11 | UNISIG SUBSET 076-3 | Methodology of testing | 2.3.1 | 2 (index 37) |

B12 | UNISIG SUBSET 076-4-1 | Test sequence generation: Methodology and Rules | 1.0.2 | 2 (index 37) |

B13 | UNISIG SUBSET 076-4-2 | ERTMS ETCS Class 1 States for Test Sequences | 1.0.2 | 2 (index 37) |

B14 | UNISIG SUBSET 076-5-3 | On-Board Data Dictionary | 2.3.0 | 2 (index 37) |

B15 | UNISIG SUBSET 076-5-4 | SRS v.2.2.2 Traceability | 2.3.1 | 2 (index 37) |

B16 | UNISIG SUBSET 076-6-1 | UNISIG test data base | 2.3.1 | 2 (index 37) |

B17 | UNISIG SUBSET 076-6-4 | Test Cases Coverage | 2.3.1 | 2 (index 37) |

B18 | Intentionally deleted | | | |

B19 | UNISIG SUBSET 077 | UNISIG Causal Analysis Process | 2.2.2 | 2 (index 27) |

B20 | UNISIG SUBSET 078 | RBC interface: Failure modes and effects analysis | 2.4.0 | 2 (index 27) |

B21 | UNISIG SUBSET 079 | MMI: Failure Modes and Effects Analysis | 2.2.2 | 2 (index 27) |

B22 | UNISIG SUBSET 080 | TIU: Failure Modes and Effects Analysis | 2.2.2 | 2 (index 27) |

B23 | UNISIG SUBSET 081 | Transmission system: Failure Modes and Effects Analysis | 2.3.0 | 2 (index 27) |

B24 | UNISIG SUBSET 088 | ETCS Application Levels 1 & 2 — Safety Analysis | 2.3.0 | 2 (index 27) |

B25 | TS50459-1 | Railway applications — European Rail Traffic Management System — Driver Machine Interface — part 1 — Ergonomic principles of ERTMS/ETCS/GSM-R Information | 2005 | 2 (index 51) |

B26 | intentionally deleted | superseded by B34 | | |

B27 | TS50459-3 | Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 3 — Ergonomic arrangements of ERTMS/GSM-R Information | 2005 | 2 (index 51) |

B28 | TS50459-4 | Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 4 — Data entry for the ERTMS/ETCS/GSM-R systems | 2005 | 2 (index 51) |

B29 | TS50459-5 | Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 5 — Symbols | 2005 | 2 (index 51) |

B30 | TS50459-6 | Railway applications — Communication, signalling and processing systems — European Rail Traffic Management System — Driver Machine Interface — part 6 — Audible Information | 2005 | 2 (index 51) |

B31 | Reserved EN50xxx | Railway applications — European Rail Traffic Management System — Driver Machine Interface — part 7 — Specific Transmission Modules | | 2 (index 51) |

B32 | Reserved | Guideline for references | | None |

B33 | EN 301515 | Global System for Mobile communication (GSM); Requirements for GSM operation in railways | 2.1.0 | 2 (index 32, 33) |

B34 | ERA-ERTMS-015560 | ERTMS/ETCS Driver Machine Interface | 2.3 | 1 (index 51) |

B35 | Reserved UNISIG SUBSET-069 | ERTMS Key Management Conformance Requirements | | 1 (index 56) |

B36 | 04E117 | ETCS/GSM-R Quality of Service user requirements — Operational Analysis | 1 | 2 (index 32) |

B37 | UNISIG SUBSET-093 | GSM-R Interfaces — Class 1 requirements | 2.3.0 | 1 (index 32, 33) |

B38 | UNISIG SUBSET-107A | Requirements on pre-fitting of ERTMS on-board equipment | 1.0.0 | 2 (index 57) |

B39 | UNISIG SUBSET-076-5-1 | ERTMS ETCS Class 1 Feature List | 2.3.1 | 2 (index 37) |

B40 | UNISIG SUBSET-076-6-7 | Test Sequences Evaluation and Validation | 1.0.2 | 2 (index 37) |

B41 | UNISIG SUBSET-076-6-8 | Generic train data for test Sequences | 1.0.1 | 2 (index 37) |

B42 | UNISIG SUBSET-076-6-10 | Test Sequence Viewer (TSV) | 3.0.8 | 2 (index 37) |

B43 | 04E083 | Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System | 1.0 | 1 (index 47) |

B44 | 04E084 | Justification Report for the Safety Requirements and Requirements to Safety Analysis for Interoperability for the Control-Command and Signalling Sub-System. | 1.0 | 2 (index B43) |

B45 | ERA/ERTMS/003205 | Traceability Of Changes To ETCS FRS | 0.1 | 2 (index 1) |

B46 | UNISIG SUBSET-099 | RBC-RBC Safe Communication Interface Test Specifications | 1.0.0 | 1 (index 62) |

--------------------------------------------------