HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"EN
27.6.2012 Official
Journal
of
the
European
Union L
166/7
COUNCIL REGULATION (EU) No 552/2012
of 21 June 2012
amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff
duties on certain agricultural, fishery and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
(5) In
view
of
their
temporary
nature,
the
suspensions
listed
in Annex I should be reviewed systematically, at the
Having regard to the Treaty on the Functioning of the European
latest five years after their application or renewal.
Union, and in particular Article 31 thereof,
Moreover, closure of certain suspensions should be
warranted at any time, as a result of a proposal of the
Having regard to the proposal from the European Commission,
Commission on the basis of a review carried out on
Whereas:
initiative of the Commission or on request of one or
more Member States if the suspensions are no longer
(1)
It is in the interest of the Union to suspend totally the
in the Union’s interest to be maintained or due to
autonomous Common Customs Tariff duties on a certain
technical product developments, to changed circum
number of products currently not listed in the Annex to
stances or to economic trends on the market.
Council Regulation (EU) No 1344/2011 ( 1 ).
(6) Since
the
suspensions
laid
down
in
this
Regulation
(2) Six
products
with
TARIC
codes
2914
39
00
20,
should take effect from 1 July 2012, this Regulation
2918 30 00 50,
3206 11 00 20,
3815 12 00 20,
should apply from that date and should enter into
3815 12 00 30 and 8302 42 00 80, which are
force immediately upon its publication in the Official
currently listed in the Annex to Regulation (EU) No
Journal of the European Union.
1344/2011 should be deleted because it is no longer
in the interest of the Union to maintain the suspension
(7) Regulation
(EU)
No
1344/2011
should
therefore
be
of autonomous Common Customs Tariff duties for those
amended accordingly,
products.
(3)
It is necessary to modify the product description of the
HAS ADOPTED THIS REGULATION:
product with CN code 2819 10 00 and the products
with TARIC codes 2914 19 90 40, 2914 70 00 50,
Article 1
2922 49 85 10,
3815 19 90 10,
3919 90 00 51,
3920 10 28 91,
3920 51 00 30,
3920 91 00 93,
The Annex to Regulation (EU) No 1344/2011 is amended as
8529 90 92 50 and 9401 90 80 10 in the Annex to
follows:
Regulation (EU) No 1344/2011 in order to take
account of technical product developments and
(1) the rows for the products listed in Annex I to this Regu
economic trends on the market. Moreover, the existing
lation are inserted;
TARIC codes 2009 41 92 70, 2009 89 79 92 and
8505 19 90 31 should be changed. In addition, for the
(2) the rows for the products for which the CN and TARIC
product with TARIC code 3904 40 00 91 double classifi
codes are set out in Annex II to this Regulation are deleted.
cation is considered necessary.
Article 2
(4) Those
suspensions,
for
which
technical
modifications
are
necessary should be deleted from the list of suspensions
This Regulation shall enter into force on the day of its
in the Annex to Regulation (EU) No 1344/2011 and
publication in the Official Journal of the European Union.
should be reinserted in that list with new product
descriptions, or new CN or TARIC codes.
It shall apply from 1 July 2012.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 21 June 2012.
For the Council
The President
M. FREDERIKSEN
( 1 ) OJ L 349, 31.12.2011, p. 1.

---

L 166/8
EN
Official Journal of the European Union
27.6.2012
ANNEX I
Products referred to in point (1) of Article 1
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 2009 41 92 20 Pineapple
juice: 8
% 31.12.2015
ex 2009 41 99 70 —
not
from
concentrate,
— of the genus Ananas,
— of a Brix value of 11 or more but not more than 16,
used in the manufacture of products of drink industry ( 1 )
ex 2009 89 79 20 Frozen
boysenberry
juice
concentrate
with
a
Brix
value
of
61
or
more,
but
not
more 0 % 31.12.2016
than 67, in immediate packing of a content of 50 litres or more
ex 2811 19 80 20 Hydrogen
iodide
(CAS
RN
10034-85-2) 0
% 31.12.2016
2819 10 00 Chromium
trioxide
(CAS
RN
1333-82-0) 0
% 31.12.2016
ex 2819 90 90 10 Dichromium
trioxide
for
use
in
metallurgy
(CAS
RN
1308-38-9)
( 1 ) 0
% 31.12.2016
ex 2826 90 80 15 Lithium
hexafluorophosphate
(CAS
RN
21324-40-3) 0
% 31.12.2016
ex 2850 00 20 40 Germanium
tetrahydride
(CAS
RN
7782-65-2) 0
% 31.12.2016
ex 2903 39 90 15 Perfluoro(4-methyl-2-pentene),
(CAS
RN
84650-68-0) 0
% 31.12.2016
ex 2903 89 90 40 Hexabromocyclododecane 0
% 31.12.2016
ex 2907 29 00 40 2,3,5-Trimethylhydroquinone
(CAS
RN
700-13-0) 0
% 31.12.2016
ex 2907 29 00 45 2-Methylhydroquinone
(CAS
RN
95-71-6) 0
% 31.12.2016
ex 2909 20 00 10 8-Methoxycedrane
(CAS
RN
19870-74-7) 0
% 31.12.2016
ex 2909 30 38 20 1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene],
(CAS
RN 0 % 31.12.2016
21850-44-2)
ex 2910 90 00 80 Allyl
glycidyl
ether
(CAS
RN
106-92-3) 0
% 31.12.2016
ex 2914 19 90 40 Pentan-2-one
(CAS
RN
107-87-9) 0
% 31.12.2012
ex 2914 29 00 50 trans-β-Damascone (CAS RN 23726-91-2) 0
% 31.12.2016
ex 2914 50 00 40 4-(4-Hydroxyphenyl)butan-2-one
(CAS
RN
5471-51-2) 0
% 31.12.2016
ex 2914 69 90 40
p-Benzoquinone (CAS RN 106-51-4) 0
% 31.12.2016
ex 2914 70 00 50 3’-Chloropropiophenone
(CAS
RN
34841-35-5) 0
% 31.12.2013
ex 2916 12 00 50 2-Hydroxyethyl
acrylate
with
a
purity
by
weight
of
97
%
or
more
(CAS
RN
818-61- 0 % 31.12.2016
1)
ex 2916 31 00 10 Benzyl
benzoate
(CAS
RN
120-51-4) 0
% 31.12.2016
ex 2918 99 90 80 Sodium
5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate,
(CAS
RN
62476- 0 % 31.12.2016
59-9)
ex 2919 90 00 50 Triethyl
phosphate
(CAS
RN
78-40-0) 0
% 31.12.2016

---

EN
27.6.2012 Official
Journal
of
the
European
Union L
166/9
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 2922 49 85 10 Ornithine
aspartate
(INNM),
(CAS
RN
3230-94-2) 0
% 31.12.2013
ex 2924 29 98 63
N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) 0
% 31.12.2016
ex 2928 00 90 30
N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0
% 31.12.2016
ex 2930 90 99 13 Mercaptamine
hydrochloride
(CAS
RN
156-57-0) 0
% 31.12.2016
ex 2930 90 99 18 1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret,
(CAS
RN 0 % 31.12.2016
106310-17-2)
ex 2931 90 90 18 Trioctylphosphine
oxide
(CAS
RN
78-50-2) 0
% 31.12.2016
ex 2932 99 00 20 Ethyl-2-methyl-1,3-dioxolane-2-acetate
(CAS
RN
6413-10-1) 0
% 31.12.2016
ex 2933 29 90 70 Cyazofamid
(ISO),
(CAS
RN
120116-88-3) 0
% 31.12.2016
ex 2933 39 99 70 2,3-Dichloro-5-trifluoromethylpyridine,
(CAS
RN
69045-84-7) 0
% 31.12.2016
ex 2933 39 99 72 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one,
(CAS
RN
120014-30-4) 0
% 31.12.2016
ex 2933 59 95 72 Triacetylganciclovir
(CAS
RN
86357-14-4) 0
% 31.12.2016
ex 2933 69 80 72 Diethylhexyl
butamido
triazone
(INCI),
(CAS
RN
154702-15-5) 0
% 31.12.2016
ex 2933 99 80 67 Candesartan
ethyl
ester
(INNM),
(CAS
RN
139481-58-6) 0
% 31.12.2016
ex 2934 99 90 43 Clopidogrel
acid
hydrochloride
(CAS
RN
144750-42-5) 0
% 31.12.2016
ex 2934 99 90 48 Propan-2-ol
-
2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzo
0 % 31.12.2016
diazepine (1:2) dihydrate, (CAS RN 864743-41-9)
ex 2935 00 90 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-
0 % 31.12.2016
yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid - 1-[(R)-(4-chlorophenyl)(phe
nyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4)
ex 3204 12 00 10 Dye
C.I.
Acid
Blue
9 0
% 31.12.2016
ex 3204 17 00 15 Dye
C.I.
Pigment
Green
7 0
% 31.12.2016
ex 3204 17 00 20 Dye
C.I.
Pigment
Blue
15:3 0
% 31.12.2016
ex 3204 17 00 25 Dye
C.I.
Pigment
Yellow
14 0
% 31.12.2016
ex 3204 17 00 35 Dye
C.I.
Pigment
Red
202 0
% 31.12.2016
ex 3204 17 00 45 Dye
C.I.
Pigment
Violet
27 0
% 31.12.2016
ex 3204 20 00 20 Dye
C.I.
Fluorescent
Brightener
71 0
% 31.12.2016
ex 3204 20 00 30 Dye
C.I.
Fluorescent
Brightener
351 0
% 31.12.2016
ex 3205 00 00 20 Dye
C.I.
Carbon
Black
7
Lake 0
% 31.12.2016
ex 3206 19 00 10 Preparation
containing
by
weight:
0 % 31.12.2016
— 72 % (± 2 %) of mica and
— 28 % (± 2 %) of titanium dioxide
ex 3801 90 00 10
Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0
% 31.12.2016

---

L 166/10
EN
Official Journal of the European Union
27.6.2012
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 3812 30 80 55 UV
stabilizer,
containing:
0 % 31.12.2016
— 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN
2725-22-6) and
— either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer
with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or
— N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-
dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)
ex 3812 30 80 60
Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotria
0 % 31.12.2016
zolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-
17-9)
ex 3812 30 80 65 Stabiliser
for
plastic
material
containing:
0 % 31.12.2016
— 2-ethylhexyl
10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradec
anoate (CAS RN 57583-35-4),
— 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-
8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and
— 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)
ex 3812 30 80 70 Light
stabiliser
containing:
0 % 31.12.2016
— branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-
hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and
— 1-methoxy-2-propyl acetate (CAS RN 108-65-6)
ex 3815 19 90 10 Catalysts
consisting
of
chromium
trioxide,
dichromium
trioxide
or
organometallic 0 % 31.12.2016
compounds of chromium, fixed on a silicon dioxide support with a pore volume of
2 cm 3 /g or more (as determined by the nitrogen absorption method)
ex 3815 19 90 87 Cathode,
in
rolls,
for
air
zinc
button
cell
batteries
(hearing
aid
batteries)
( 1 ) 0
% 31.12.2016
ex 8506 90 00 10
ex 3817 00 80 30 Mixed
alkylnaphthalenes,
modified
with
aliphatic
chains,
of
a
chain-length
varying 0 % 31.12.2016
from 12 to 56 carbon atoms
ex 3824 90 97 26 Aqueous
dispersion,
containing
by
weight:
0 % 31.12.2016
— 76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)
— 4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and
— 2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)
ex 3824 90 97 31 Mixture
containing
by
weight:
0 % 31.12.2016
— 70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperi
dyl)sebacate (CAS RN 41556-26-7) and
— 20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-
piperidyl sebacate (CAS RN 82919-37-7)
ex 3824 90 97 32 Mixture
of:
0 % 31.12.2016
— basic zirconium carbonate (CAS RN 57219-64-4) and
— cerium carbonate (CAS RN 537-01-9)
ex 3824 90 97 33 Preparation,
containing:
0 % 31.12.2016
— trioctylphosphine oxide (CAS RN 78-50-2),
— dioctylhexylphosphine oxide (CAS RN 31160-66-4),
— octyldihexylphosphine oxide (CAS RN 31160-64-2) and
— trihexylphosphine oxide (CAS RN 597-50-2)

---

EN
27.6.2012 Official
Journal
of
the
European
Union L
166/11
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 3903 90 90 60 Copolymer
of
styrene
with
maleic
anhydride,
either
partially
esterified
or
completely 0 % 31.12.2016
chemically modified, of an average molecular weight (M n ) of not more than 4 500,
in flake or powder form
ex 3911 90 99 60
ex 3904 30 00 30
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by
0 % 31.12.2013
weight:
ex 3904 40 00 91
— 87 % or more but not more than 92 % of vinyl chloride,
— 2 % or more but not more than 9 % of vinyl acetate and
— 1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manu
facture of goods of headings 3215 or 8523 or for use in the manufacture of
coatings for containers and closures of a kind used for preserving food and drink ( 1 )
ex 3907 20 11 50 [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 0 % 31.12.2016
hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2)
ex 3907 20 11 60 Preparation
containing:
0 % 31.12.2016
— α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-
oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and
— α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-
oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyp
henyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)
ex 3912 20 11 10 Nitrocellulose 0
% 31.12.2016
ex 3919 10 80 80 Acrylic
tape
put
up
in
rolls: 0
% 31.12.2016
ex 3919 90 00 83 —
self-adhesive
on
both
sides,
— of a total thickness of 0,04 mm or more, but not more than 1,25 mm,
— of a total width of 5 mm or more but not more than 1 205 mm
for use in the manufacture of products of headings 8521 and 8528 ( 1 )
ex 3919 90 00 51 Biaxially-oriented
film
of
poly(methyl
methacrylate),
of
a
thickness
of
50
μm or
0 % 31.12.2013
more but not exceeding 90 μm, covered on one side with an adhesive layer and a
release sheet
ex 3919 90 00 85
Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and
0 % 31.12.2016
copper:
— having a minimum reflectance of 93,5 % as determined by ASTM G173-03,
— covered on one side with a removable layer of polyethylene,
— covered on the other side with an acrylic pressure sensitive adhesive and a
siliconised polyester liner
ex 3919 90 00 87
Self adhesive transparent film, having a transmittance of more than 90 % and a haze
0 % 31.12.2016
of less than 3 % (as determined by ASTM D1003), consisting of several layers
including:
— an acrylic adhesive layer with a thickness of 20 μm or more but not more than
70 μm,
— a polyurethane based layer with a thickness of 100 μm or more but not more
than 300 μm
ex 3920 10 28 91 Poly(ethylene)
film
printed
with
a
graphic
design,
which
is
achieved
by
using
four 0 % 31.12.2013
base colours in ink plus specialist colours, to achieve multiple colours in ink on one
side of the film, and one colour on the opposite side, the graphic design also has the
following characteristics:
— is repetitive and equally spaced along the length of the film
— is equally and visibly aligned when viewed from the back or front of the film

---

L 166/12
EN
Official Journal of the European Union
27.6.2012
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 3920 20 21 40 Sheets
of
biaxially
—
oriented
polypropylene
film:
0 % 31.12.2016
— with the thickness of not more than 0,1 mm,
— printed on both sides with specialised coatings to allow banknote security
printing
ex 3920 20 29 50
Sheet of polypropylene in the form of a roll: 0
% 31.12.2016
ex 8507 90 30 95 —
with
a
thickness
of
not
more
than
30
μm,
— of a width of not more than 210 mm,
— conforming to ASTM D882,
for use in the manufacture of separators for lithium-ion electric vehicle batteries ( 1 )
ex 3920 51 00 30 Biaxially-oriented
film
of
poly(methyl
methacrylate),
of
a
thickness
of
50
μm or
0 % 31.12.2013
more but not exceeding 90 μm
ex 3920 91 00 93 Film
of
poly(ethylene
terephthalate),
whether
or
not
metallised
on
one
or
both
sides, 0 % 31.12.2013
or laminated film of poly(ethylene terephthalate) films, metallised on the external
sides only, and having the following characteristics:
— a visible light transmission of 50 % or more,
— coated on one or both sides with a layer of poly(vinyl butyral) but not coated
with an adhesive or any other material except poly(vinyl butyral),
— a total thickness of not more than 0,2 mm without taking the presence of
poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more
than 0,2 mm
for use in the manufacture of heat-reflecting or decorative laminated glass ( 1 )
ex 3921 90 90 10 Roll
of
polymer-metal
laminate
comprising: 0
% 31.12.2016
ex 8507 90 80 50 —
a
layer
of
poly(ethylene
terephthalate),
— a layer of aluminium,
— a layer of polypropylene,
— with a width of not more than 275 mm,
— a total thickness of not more than 165 μm, and
— conforming to ASTM D1701-91 and ASTM D882-95A
for use in the manufacture of lithium-ion electric vehicle batteries ( 1 )
ex 3923 10 00 10 Photomask
compacts:
0 % 31.12.2016
— consisting of antistatic materials or blended thermoplastics proving special elec
trostatic discharge (ESD) and outgassing properties,
— having non porous, abrasion resistant or impact resistant surface properties,
— fitted with a specially designed retainer system that protects the photomask from
surface or cosmetic damage and
— with or without a gasket seal,
of a kind used in the photolithography production to house photomasks
ex 3926 90 97 80 Parts
of
car
radio
front
panels
0 % 31.12.2016
— of acrylonitrile-butadiene-styrene with or without polycarbonate,
— coated with a copper, a nickel and a chrome layers,
— with a total thickness of coating of 5,54 μm or more but not more than
22,3 μm

---

EN
27.6.2012 Official
Journal
of
the
European
Union L
166/13
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 7318 14 99 20 Rock
bolt: 0
% 31.12.2016
ex 7318 14 99 29 —
being
a
self-tapping
screw,
— with a length of more than 300 mm,
of a kind used for support of mines
ex 7326 90 98 40 TV
pedestal
stand
with
metal
upper
part
for
fixation
and
stabilization
of
TV
cabinet 0 % 31.12.2016
case/body
ex 8529 90 49 10
ex 8529 90 92 60
ex 7410 11 00 10 Roll
of
laminate
foil
of
graphite
and
copper,
with: 0
% 31.12.2016
ex 8507 90 80 60
— a width of 610 mm or more but not more than 620 mm, and
ex 8545 90 90 30 —
a
diameter
of
690
mm
or
more
but
not
more
than
710
mm,
for use in the manufacture of lithium-ion electric vehicle batteries ( 1 )
ex 7410 22 00 10 Cut
plate
of
nickel-plated
copper
foil,
with: 0
% 31.12.2016
ex 8507 90 80 70 —
a
width
of
70
mm
(±
5
mm),
— a thickness of 0,4 mm (± 0,2 mm),
— a length of not more than 55 mm,
for use in the manufacture of lithium-ion electric vehicle batteries ( 1 )
ex 7607 11 90 40 Aluminium
foil
in
rolls:
0 % 31.12.2016
— having a purity of 99,99 % by weight,
— of a thickness of 0,021 mm or more but not more than 0,2 mm,
— with a width of 500 mm,
— with a surface oxide layer by 3 to 4 nm thick,
— and with a cubic texture of more than 95 %
ex 7607 19 90 10
Sheet in the form of a roll consisting of a laminate of lithium and manganese
0 % 31.12.2016
bonded to aluminium, with:
ex 8507 90 80 80
— a width of 595 mm or more but not more than 605 mm, and
— a diameter of 690 mm or more but not more than 710 mm,
for use in the manufacture of cathodes for lithium-ion electric vehicle batteries ( 1 )
ex 7616 99 90 70 Connecting
components
for
use
in
the
production
of
helicopter
tail
rotor
shafts
( 1 ) 0
% 31.12.2016
ex 8482 80 00 10
ex 8803 30 00 40
ex 8108 90 30 40 Wire
of
an
titanium
alloy
containing
by
weight
0 % 31.12.2016
— 22 % (± 3 %) of vanadium and
— 4 % (± 0,5 %) of aluminium
ex 8108 90 50 70
Strip of an alloy of titanium, containing by weight
0 % 31.12.2016
— 15 % (± 1 %) of vanadium
— 3 % (± 0,5 %) of chromium
— 3 % (± 0,5 %) of tin and
— 3 % (± 0,5 %) of aluminium
ex 8108 90 50 75 Plates,
sheets,
strips
and
foil
of
titanium
alloy,
containing
by
weight:
0 % 31.12.2016
— 0,3 % or more but not more than 0,7 % of aluminium and
— 0,25 % or more but not more than 0,6 % of silicon

---

L 166/14
EN
Official Journal of the European Union
27.6.2012
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 8108 90 50 80 Plates,
sheets,
strips
and
foil
of
cold
rolled
titanium
alloy,
containing
by
weight
not 0 % 31.12.2016
more than:
— 0,25 % of iron,
— 0,20 % of oxygen,
— 0,08 % of carbon,
— 0,03 % of nitrogen and
— 0,013 % of hydrogen
ex 8108 90 90 20
Parts of spectacle frames and mountings, including bolts of the kind used for
0 % 31.12.2016
spectacle frames and mountings, of an alloy of titanium
ex 9003 90 00 10
ex 8113 00 20 10 Cermet
blocks
containing
by
weight
60
%
or
more
of
aluminium
and
5
%
or
more 0 % 31.12.2016
of boron carbide
ex 8409 91 00 10 Exhaust
manifold
complying
with
standard
DIN
EN
13835,
whether
or
not
with 0 % 31.12.2016
turbine housing, with four inlet ports, for use in the manufacture of exhaust
manifold that is turned, milled, drilled and/or processed by other means ( 1 )
ex 8409 99 00 20
ex 8414 59 80 40 Cross-flow
fan,
with; 0
% 31.12.2016
ex 8414 90 00 60
— a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm
(± 1,0 mm),
— a diameter of 95 mm (± 0,6 mm) or 102 mm (± 0,6 mm),
— an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic
raw material that has a minimum temperature resistance of 70 °C (± 5 °C),
for use in the manufacture of indoor units of split-type air conditioning machines ( 1 )
ex 8501 31 00 60 Brushless
DC
motor
that
can
revolve
counter
clockwise
(CCW),
with:
0 % 31.12.2016
— an input voltage of 264 V or more, but not more than 391 V,
— an external diameter of 81 mm (± 2,5 mm) or more, but not more than
150 mm (± 0,8 mm),
— an output power of not more than 125 W,
— E or B class winding insulation,
for use in the manufacture of indoor or outdoor units of split-type air conditioning
machines ( 1 )
ex 8504 40 82 40
Printed circuit board equipped with a bridge rectifier circuit and other active and
0 % 31.12.2012
passive components
— with two output connectors
— with two input connectors which are available and useablein parallel
— able to switch between bright and dimmed operation mode
— with an input voltage of 40 V (+ 25 % –15 %) or 42 V (+ 25 % –15 %) in bright
operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation
mode, or
— with an input voltage of 230 V (+ 20 % –15 %) in bright operation mode, with
an input voltage of 160 V (± 15 %) in dimmed operation mode, or
— with an input voltage of 120 V (15 % –35 %) in bright operation mode, with an
input voltage of 60 V (± 20 %) in dimmed operation mode
— with an input current reaching 80 % of its nominal value within 20 ms
— with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V
and 230 V, and 45-70 Hz for 120 V versions
— with an maximum inrush current overshoot of not more than 250 % of the
input current

---

EN
27.6.2012 Official
Journal
of
the
European
Union L
166/15
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
— with a period of the inrush current overshoot of not more than 100ms
— with an input current undershoot of not less than 50 % of the input current
— with a period of the inrush current undershoot of not more than 20ms
— with a presettable output current
— with an output current reaching 90 % of its nominal pre-set value within 50 ms
— with an output current reaching zero within 30 ms after removal of the input
voltage
— with an defined failure status in case of no-load or too-high load (end-of-life
function)
ex 8505 11 00 31 Permanent
magnet
having
a
remanence
of
455
mT
(±
15
mT) 0
% 31.12.2013
ex 8505 11 00 40 Neodymium-ferro
ring
with
an
external
diameter
of
not
more
than
13
mm,
an 0 % 31.12.2013
internal diameter of not more than 9 mm
ex 8507 60 00 65 Cylindrical
Lithium
Ion
Cell
with
0 % 31.12.2016
— 3,5 VDC to 3,8 VDC,
— 300 mAh to 900 mAh and
— a diameter of 10,0 mm to 14,5 mm
ex 8507 60 00 75 Rectangular
lithium-ion-accumulator,
with
0 % 31.12.2016
— a metal casing,
— a length of 173 mm (± 0,15 mm),
— a width of 21 mm (± 0,1 mm),
— a height of 91 mm (± 0,15 mm),
— a nominal voltage of 3,3 V and,
— a nominal capacity of 21 Ah or more
ex 8529 90 92 50
Colour LCD display panel for LCD monitors of heading 8528:
0 % 31.12.2015
— with a diagonal measurement of the screen of 14,48 cm or more but not more
than 31,24 cm,
— with background lighting, micro-controller,
— with a CAN (Controller area network)-controller with LVDS (Low-voltage differ
ential signalling) interface and CAN/power supply socket or with an APIX (Auto
motive Pixel Link) controller with APIX interface,
— in a housing with or without a heat sink at the back of the housing,
— without a signal-processing module,
for use in the manufacture of vehicles of chapter 87 ( 1 )
ex 8708 80 99 10 Piston
rod
for
shock-absorbers
used
in
vehicle
suspension
systems
with:
0 % 31.12.2016
— a diameter at its widest point of 12,4 mm or more, but not more than 28 mm,
— a length of 236,5 mm or more, but not more than 563,5 mm
ex 8803 30 00 50 Pre-formed
helicopter
rotor
shafts
0 % 31.12.2016
— of circular cross-section,
— with a length of 1 249,68 mm or more, but not more than 1 496,06 mm,
— of an external diameter of 81,356 mm or more, but not more than
82,2198 mm,
— swaged on both ends to an external diameter of 63,8683 mm or more, but not
more than 66,802 mm,
— heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

---

L 166/16
EN
Official Journal of the European Union
27.6.2012
Rate of
CN code TARIC Description
autonomous
Date foreseen for
duty
mandatory review
ex 9001 10 90 30 Polymer
optical
fibre
with:
0 % 31.12.2016
— a poly(methyl methacrylate) core,
— a cladding of fluorinated polymer,
— a diameter of not more than 3,0 mm, and
— a length of more than 150 m,
of a kind used in the manufacture of polymer fibre cables
ex 9401 90 80 10
Ratchet disk of a kind used in the manufacture of reclining car seats 0
% 31.12.2015
( 1 ) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).

---

EN
27.6.2012 Official
Journal
of
the
European
Union L
166/17
ANNEX II
Products referred to in point (2) of Article 1
CN code TARIC
2009 41 92 70
2009 41 99 70
2009 89 79 92
2819 10 00
2914 19 90 40
2914 39 00 20
2914 70 00 50
2918 30 00 50
2922 49 85 10
3206 11 00 20
3815 19 90 10
3815 12 00 20
3815 12 00 30
3904 40 00 91
3919 90 00 51
3920 10 28 91
3920 51 00 30
3920 91 00 93
8302 42 00 80
8505 19 90 31
8529 90 92 50
9401 90 80 10

---

Document Outline

• �

---