委员会实施条例(EU) 2015/1981,批准N,N-亚甲基双吗啉析出的甲醛作为6、13生产型生物农药产品的活性物质

技术法规类型:欧盟Eurlex法规 来源:tbtmap

EURLEX ID:32015R1981

OJ编号:OJ L 289, 5.11.2015, p. 9-12

中文标题:委员会实施条例(EU) 2015/1981,批准N,N-亚甲基双吗啉析出的甲醛作为6、13生产型生物农药产品的活性物质

原文标题:Commission Implementing Regulation (EU) 2015/1981 of 4 November 2015 approving Formaldehyde released from N,N-Methylenebismorpholine as an existing active substance for use in biocidal products for product-types 6 and 13 (Text with EEA relevance)

分类:03.50.20_植物健康

文件类型:二级立法 Regulation|条例

生效日期:2015-11-25

废止日期:2058-12-31

法规全文:查看欧盟官方文件

L_2015289EN.01000901.xml

5.11.2015   

EN

Official Journal of the European Union

L 289/9


COMMISSION IMPLEMENTING REGULATION (EU) 2015/1981

of 4 November 2015

approving Formaldehyde released from N,N-Methylenebismorpholine as an existing active substance for use in biocidal products for product-types 6 and 13

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular the third subparagraph of Article 89(1) thereof,

Whereas:

(1)

Commission Delegated Regulation (EU) No 1062/2014 (2) establishes a list of existing active substances to be evaluated for their possible approval for use in biocidal products.

(2)

That list includes N,N-Methylenebismorpholine, to be renamed formaldehyde released from N,N-Methylenebismorpholine (hereafter referred to as ‘MBM’), as the result of its evaluation.

(3)

MBM has been evaluated in accordance with Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council (3) for use in product-type 6, in-can preservatives, and product-type 13, metalworking-fluid preservatives, as defined in Annex V to that Directive, which correspond respectively to product-types 6 and 13 as defined in Annex V to Regulation (EU) No 528/2012.

(4)

Austria was designated as evaluating competent authority and submitted the assessment reports, together with its recommendations, to the Commission on 25 July 2013 in accordance with paragraphs 4 and 6 of Article 14 of Commission Regulation (EC) No 1451/2007 (4).

(5)

In accordance with Article 7(1)(b) of Delegated Regulation (EU) No 1062/2014, the opinions of the European Chemicals Agency were formulated on 3 October 2014 by the Biocidal Product Committee, having regard to the conclusions of the evaluating competent authority.

(6)

According to those opinions, biocidal products used for product-types 6 and 13 and containing MBM may be expected to satisfy the requirements laid down in Article 5 of Directive 98/8/EC provided that certain conditions concerning its use are complied with.

(7)

It is therefore appropriate to approve MBM for use in biocidal products for product-types 6 and 13 subject to compliance with the specific conditions in the Annex.

(8)

The opinions conclude that MBM meets the criteria for classification as carcinogenic category 1B in accordance with Regulation (EC) No 1272/2008 of the European Parliament and of the Council (5).

(9)

Since pursuant to Article 90(2) of Regulation (EU) No 528/2012, substances for which the Member States' evaluation has been completed by 1 September 2013 should be approved in accordance with Directive 98/8/EC, the period of approval should be 5 years in accordance with the practice established under that Directive.

(10)

For the purposes of Article 23 of Regulation (EU) No 528/2012 however, MBM meets the conditions of Article 10(1)(a) of that Regulation and should therefore be considered a candidate for substitution.

(11)

Furthermore, pursuant to point 10 of Annex VI to Regulation (EU) No 528/2012, the competent authorities should also evaluate whether the conditions of Article 5(2) can be satisfied to decide if a biocidal product containing MBM can be authorised or not.

(12)

Since MBM meets the criteria for classification as carcinogenic category 1B, and as skin sensitiser category 1 as defined in Annex I to Regulation (EC) No 1272/2008, treated articles treated with or incorporating MBM should be appropriately labelled when placed on the market.

(13)

A reasonable period should be allowed to elapse before an active substance is approved, in order to permit interested parties to take the preparatory measures necessary to meet the new requirements.

(14)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,

HAS ADOPTED THIS REGULATION:

Article 1

Formaldehyde released from N,N-Methylenebismorpholine is approved as an active substance for use in biocidal products for product-types 6 and 13, subject to the specifications and conditions set out in the Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 4 November 2015.

For the Commission

The President

Jean-Claude JUNCKER


(1)  OJ L 167, 27.6.2012, p. 1.

(2)  Commission Delegated Regulation (EU) No 1062/2014 of 4 August 2014 on the work programme for the systematic examination of all existing active substances contained in biocidal products referred to in Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 294, 10.10.2014, p. 1).

(3)  Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market (OJ L 123, 24.4.1998, p. 1).

(4)  Commission Regulation (EC) No 1451/2007 of 4 December 2007 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products on the market (OJ L 325, 11.12.2007, p. 3).

(5)  Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).


ANNEX

Common Name

IUPAC Name

Identification Numbers

Minimum degree of purity of the active substance (1)

Date of approval

Expiry date of approval

Product type

Specific conditions

Formaldehyde released from N,N-Methylenebismorpholine (hereafter referred to as ‘MBM’)

IUPAC Name:

N,N-Methylenebismorpholine

EC No: 227-062-3

CAS No: 5625-90-1

92,1 % w/w

1 April 2017

31 March 2022

6

MBM is considered a candidate for substitution in accordance with Article 10(1)(a) of Regulation (EU) No 528/2012.

The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. In addition, pursuant to point 10 of Annex VI to Regulation (EU) No 528/2012, the product assessment shall include an evaluation as to whether the conditions of Article 5(2) of Regulation (EU) No 528/2012 can be satisfied.

The authorisations of biocidal products are subject to the following conditions:

(1)

Products shall only be authorised for use in Member States where at least one of the conditions set in Article 5(2) of Regulation (EU) No 528/2012 is met.

(2)

For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means.

(3)

In view of the risks to professional users, mixing and loading of products to formulation vessels shall be automated, unless it can be demonstrated that potential exposure of skin, eye and respiratory tracts to MBM can be reduced to an acceptable level by other means.

The placing on the market of treated articles is subject to the following condition:

The person responsible for the placing on the market of a treated article treated with or incorporating MBM shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.

13

MBM is considered a candidate for substitution in accordance with Article 10(1)(a) of Regulation (EU) No 528/2012.

The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. In addition, pursuant to point 10 of Annex VI to Regulation (EU) No 528/2012, the product assessment shall include an evaluation as to whether the conditions of Article 5(2) of Regulation (EU) No 528/2012 can be satisfied.

The authorisations of biocidal products are subject to the following conditions:

(1)

Products shall only be authorised for use in Member States where at least one of the conditions set in Article 5(2) of Regulation (EU) No 528/2012 is met.

(2)

For professional users, safe operational procedures and appropriate organisational measures shall be established. Products shall be used with appropriate personal protective equipment where exposure cannot be reduced to an acceptable level by other means.

(3)

In view of the risks to professional users, mixing and loading of products to formulation vessels shall be automated, unless it can be demonstrated that potential exposure of skin, eye and respiratory tracts to MBM can be reduced to an acceptable level by other means.

The placing on the market of treated articles is subject to the following condition:

The person responsible for the placing on the market of a treated article treated with or incorporating MBM shall ensure that the label of that treated article provides the information listed in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.


(1)  The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 16(2) of Directive 98/8/EC. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance.


附件:

P020171219708153513731.pdf

托管标准,您可以接收以下服务:

1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户;

2 随时在标准托管页面中查看到该条标准的最新状态;

3 若用户有在学习和科研中的需要,可以在标准托管页面中试阅标准;

4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持;

5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询;

6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务;

进入企业标准托管

您可以通过编辑查新模板,批量查询指定标准集的最新情况。我们会通过查询,向您展示您所查询标准的:

1. 准确的标准号及标准名称(我们通过人工智能技术对您提交的标准号进行自动纠正)

2. 标准的最新状态(现行、废止或未发布)

3. 若标准已废止并被新标准替代,会反馈被替代的标准

4. 若您已托管此标准,便可以实时跟踪这个标准的最新状态

标准查新 模板下载

您可以在这里检索全球超过140万条标准,支持上百个国内国际标准组织的标准查询。您也可以在这里检索国内各类国家、部委和地方的法律法规。

更多标准子库在持续建设中。

标准检索

标准资讯点击排行榜 全部

资讯标题点击

[[ n.title ]] [[ n.read ]]

大连标准化公共服务平台

版权:大连标准化研究院有限公司

地址:大连市中山区高原街56号

电话:0411-82740851

大连标准