HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"L 179/22
EN
Official Journal of the European Union
29.6.2013
II
(Non-legislative acts)
REGULATIONS
COUNCIL REGULATION (EU) No 626/2013
of 27 June 2013
amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff
duties on certain agricultural, fishery and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
be deleted from the list of suspensions in the Annex to
Regulation (EU) No 1344/2011 and reinserted in that list
with new time limits for a mandatory review.
Having regard to the Treaty on the Functioning of the European
Union, and in particular Article 31 thereof,
(6) In
the
interest
of
clarity,
the
modified
entries
should
be
Having regard to the proposal from the European Commission,
marked with an asterisk in the lists of inserted and
deleted suspensions set out in Annex I and Annex II to
this Regulation.
Whereas:
(7) In
view
of
their
temporary
nature,
the
suspensions
listed
(1)
It is in the interest of the Union to suspend totally the
in Annex I should be reviewed systematically, at the
autonomous Common Customs Tariff duties on 80 new
latest five years after their application or renewal.
products which are currently not listed in the Annex to
Moreover, closure of certain suspensions should be
Council Regulation (EU) No 1344/2011
( 1 ). Those
warranted at any time, as a result of a proposal of the
products should therefore be inserted in that Annex.
Commission on the basis of a review carried out on the
initiative of the Commission or at the request of one or
(2)
It is no longer in the interest of the Union to maintain
more Member States, if it is no longer in the Union’s
the suspension of autonomous Common Customs Tariff
interest to maintain the suspensions, or due to technical
duties for 15 of the products which are currently listed in
product developments, changed circumstances or
the Annex to Regulation (EU) No 1344/2011. Accord
economic trends on the market.
ingly, those products should be deleted from that Annex.
(8)
Since it is necessary that the suspensions laid down in
(3) It
is
necessary
to
modify
the
product
description
of
22
this Regulation take effect from 1 July 2013, this Regu
suspensions in the Annex to Regulation (EU) No
lation should apply from that date and should enter into
1344/2011 in order to take account of technical
force immediately upon its publication in the Official
product developments and economic trends on the
Journal of the European Union.
market as well as linguistic adaptations. Moreover,
TARIC codes for eight products should be changed. In
addition, for three products multiple classification is
(9) Regulation
(EU)
No
1344/2011
should
therefore
be
considered necessary whereas for 12 products double
amended accordingly,
classification is no longer necessary.
HAS ADOPTED THIS REGULATION:
(4) Those
suspensions
for
which
technical
modifications
are
necessary should be deleted from the list of suspensions
in the Annex to Regulation (EU) No 1344/2011 and
Article 1
should be reinserted in that list with new product
The Annex to Regulation (EU) No 1344/2011 is hereby
descriptions, or new CN or TARIC codes.
amended as follows:
(5)
For three products it is in the interest of the Union to
(1) the rows for the products listed in Annex I to this Regu
amend the date for their mandatory review in accordance
lation are inserted;
with Article 2(2) and (3) of Regulation (EU) No
1344/2011. The reviewed suspensions should therefore
(2) the rows for the products for which the CN and TARIC
( 1 ) OJ L 349, 31.12.2011, p. 1.
codes are set out in Annex II to this Regulation are deleted.

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/23
Article 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European
Union.
It shall apply from 1 July 2013.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 27 June 2013.
For the Council
The President
E. GILMORE

---

L 179/24
EN
Official Journal of the European Union
29.6.2013
ANNEX I
Products referred to in point (1) of Article 1
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 2007 99 50 81 Acerola
puree
concentrate:
9 % ( 2 ) 31.12.2017
— of the genus Malpighia spp.,
(*) ex 2007 99 50 91
— with a sugar content by weight of 13 % or more but not
more than 30 %
for use in the manufacture of products of food and drink indus
try ( 1 )
ex 2007 99 50 82 Acidified
banana
puree
concentrate,
obtained
by
cooking: 11,5 % ( 2 ) 31.12.2017
— of the genus Musa cavendish,
ex 2007 99 50 92
— with a sugar content by weight of 13 % or more but not
more than 30 %
for use in the manufacture of products of food and drink indus
try ( 1 )
(*) ex 2007 99 50 83 Mango
puree
concentrate,
obtained
by
cooking:
6 % ( 2 ) 31.12.2017
— of the genus Mangifera spp.,
(*) ex 2007 99 50 93
— with a sugar content by weight of not more than 30 %
for use in the manufacture of products of food and drink indus
(*) ex 2007 99 93 10
try ( 1 )
(*) ex 2007 99 50 84 Papaya
puree
concentrate,
obtained
by
cooking:
7,8 % ( 2 ) 31.12.2017
— of the genus Carica spp.,
(*) ex 2007 99 50 94
— with a sugar content by weight of 13 % or more but not
more than 30 %
for use in the manufacture of products of food and drink indus
try ( 1 )
ex 2007 99 50 85 Guava
puree
concentrate,
obtained
by
cooking:
6 % ( 2 ) 31.12.2017
— of the genus Psidium spp.,
ex 2007 99 50 95
— with a sugar content by weight of 13 % or more but not
more than 30 %
for use in the manufacture of products of food and drink indus
try ( 1 )
(*) ex 2805 30 90 40 Rare
earth
metals,
scandium
and
yttrium
of
a
purity
by
weight 0 % 31.12.2015
of 95 % or more
(*) ex 2805 30 90 50
(*) ex 2805 30 90 60
(*) ex 2805 30 90 70
(*) ex 2805 30 90 75
(*) ex 2805 30 90 79

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/25
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 2811 19 80 30 Phosphorous
acid
(CAS
RN
10294-56-1)/phosphonic
acid
(CAS 0 % 31.12.2017
RN 13598-36-2) used as an ingredient for production of
additives used in poly(vinyl chloride) industry ( 1 )
(*) ex 2818 10 91 10 Sintered
corundum
with
micro
crystalline
structure,
containing 0 % 31.12.2015
by weight:
— 94 % or more, but not more than 98,5 % of α-Al2O3,
— 2 % (± 1,5 %) of magnesium spinel,
— 1 % (± 0,6 %) of yttrium oxide and
— 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide
with less than 50 % of the total weight having a particle size of
more than 10 mm
ex 2903 39 90 25 2,3,3,3-Tetrafluoroprop-1-ene
(CAS
RN
754-12-1) 0
% 31.12.2017
ex 2903 89 90 50 Chlorocyclopentane
(CAS
RN
930-28-9) 0
% 31.12.2017
ex 2905 39 95 40 Decane-1,10-diol
(CAS
RN
112-47-0) 0
% 31.12.2017
ex 2906 29 00 30 2-Phenylethanol
(CAS
RN
60-12-8) 0
% 31.12.2017
ex 2907 23 00 10 4,4’-Isopropylidenediphenol
(CAS
RN
80-05-7) 0
% 31.12.2017
ex 2907 29 00 55 Biphenyl-2,2’-diol
(CAS
RN
1806-29-7) 0
% 31.12.2017
ex 2912 29 00 50 4-Isobutylbenzaldehyde
(CAS
RN
40150-98-9) 0
% 31.12.2017
ex 2914 50 00 45 3,4-Dihydroxybenzophenone
(CAS
RN
10425-11-3) 0
% 31.12.2017
ex 2914 70 00 20 2,4-Difluorobenzophenone
(CAS
RN
342-25-6) 0
% 31.12.2017
ex 2915 39 00 20 Isopentyl
acetate
(CAS
RN
123-92-2) 0
% 31.12.2017
ex 2915 60 19 10 Ethyl
butyrate
(CAS
RN
105-54-4) 0
% 31.12.2017
ex 2915 90 70 30 3,3-Dimethylbutyryl
chloride
(CAS
RN
7065-46-5) 0
% 31.12.2017
ex 2916 12 00 70 2-(2-Vinyloxyethoxy)ethyl
acrylate
(CAS
RN
86273-46-3) 0
% 31.12.2017
(*) ex 2917 13 90 10 Dimethyl
sebacate
(CAS
RN
106-79-6) 0
% 31.12.2017
ex 2918 29 00 35 Propyl
3,4,5-trihydroxybenzoate
(CAS
RN
121-79-9) 0
% 31.12.2017
ex 2918 30 00 50 Ethyl
acetoacetate
(CAS
RN
141-97-9) 0
% 31.12.2017
ex 2918 99 90 15 Ethyl
2,3-epoxy-3-phenylbutyrate
(CAS
RN
77-83-8) 0
% 31.12.2017
(*) ex 2918 99 90 40 trans-4-Hydroxy-3-methoxycinnamic
acid
(CAS
RN
537-98-4) 0
% 31.12.2013
ex 2920 90 10 60 2,4-Di-tert-butyl-5-nitrophenyl
methyl
carbonate
(CAS
RN 0 % 31.12.2017
873055-55-1)
ex 2921 30 99 40 Cyclopropylamin
(CAS
RN
765-30-0) 0
% 31.12.2017
ex 2922 19 85 20 2-(2-Methoxyphenoxy)ethylamine
hydrochloride
(CAS
RN 0 % 31.12.2017
64464-07-9)

---

L 179/26
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 2922 19 85 25 Titanium
bis(triethanolamine)diisopropoxide
(CAS
RN
36673- 0 % 31.12.2017
16-2)
ex 2929 10 00 20 Butyl
isocyanate
(CAS
RN
111-36-4) 0
% 31.12.2017
ex 2931 90 90 35 (Z)-Prop-1-en-1-ylphosphonic
acid
(CAS
RN
25383-06-6) 0
% 31.12.2017
ex 2932 99 00 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic 0 % 31.12.2017
acid (CAS RN 862574-88-7)
ex 2933 19 90 85 Allyl
5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyra
0 % 31.12.2017
zolcarbothioat (CAS RN 473799-16-5)
ex 2933 29 90 80 Imazalil
(ISO)
(CAS
RN
35554-44-0) 0
% 31.12.2017
ex 2933 39 99 57 Tert-butyl
3-(6-amino-3-methylpyridin-2-yl)benzoate
(CAS
RN 0 % 31.12.2017
1083057-14-0)
ex 2933 49 10 30 Ethyl
4-oxo-1,4-dihydroquinoline-3-carboxylate
(CAS
RN 0 % 31.12.2017
52980-28-6)
ex 2933 99 80 43 2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline
(CAS
RN
5840-01-7) 0
% 31.12.2017
ex 2933 99 80 47 Paclobutrazol
(ISO)
(CAS
RN
76738-62-0) 0
% 31.12.2017
ex 2934 99 90 37 4-Propan-2-ylmorpholine
(CAS
RN
1004-14-4) 0
% 31.12.2017
(*) ex 3204 11 00 20 Dye
C.I.
Disperse
Yellow
241
(CAS
RN
83249-52-9),
with
a 0 % 31.12.2015
purity of 97 % or more as determined by high pressure liquid
chromatography
ex 3204 11 00 80 Dye
preparation,
non-ionogenic,
containing:
0 % 31.12.2017
— N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-
methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine
(CAS RN 159010-67-0)
— N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-
dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN
170222-39-6) and
— N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-
1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine
(CAS RN 371921-34-5)
ex 3204 12 00 20 Dye
preparation,
anionic,
containing
by
weight
75
%
or
more
of 0 % 31.12.2017
disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-
yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-
naphthalenesulfonate (CAS RN 145703-76-0)
ex 3204 12 00 30 Acid
dye
preparation,
anionic,
containing:
0 % 31.12.2017
— lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-
sulfonate (CAS RN 125328-86-1),
— C.I. Acid Green 25 (CAS RN 4403-90-1) and
— C.I. Acid Blue 80 (CAS RN 4474-24-2)
ex 3204 13 00 30 Dye
C.I.
Basic
Blue
7
(CAS
RN
2390-60-5) 0
% 31.12.2017
ex 3204 13 00 40 Dye
C.I.
Basic
Violet
1
(CAS
RN
603-47-4)/(CAS
RN
8004- 0 % 31.12.2017
87-3)
(*) ex 3204 17 00 25 Dye
C.I.
Pigment
Yellow
14
(CAS
RN
5468-75-7) 0
% 31.12.2016

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/27
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 3204 17 00 60 Dye
C.I.
Pigment
Red
53:1
(CAS
RN
5160-02-1) 0
% 31.12.2016
(*) ex 3204 17 00 70 Dye
C.I.
Pigment
Yellow
13
(CAS
RN
5102-83-0) 0
% 31.12.2016
ex 3204 17 00 75 Dye
C.I.
Pigment
Orange
5
(CAS
RN
3468-63-1) 0
% 31.12.2017
(*) ex 3204 19 00 73 Dye
C.I.
Solvent
Blue
104
(CAS
RN
116-75-6)
with
a
purity
of 0 % 31.12.2015
97 % or more determined by high pressure liquid chroma
tography
ex 3207 40 85 40 Glass
flakes
(CAS
RN
65997-17-3):
0 % 31.12.2017
— of a thickness of 0,3 μm or more but not more than 10 μm,
and
— coated with titanium dioxide (CAS RN 13463-67-7) or iron
oxide (CAS RN 18282-10-5)
ex 3215 19 00 20 Ink:
0 % 31.12.2017
— consisting of a polyester polymer and a dispersion of silver
(CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-
6) in methyl propyl ketone (CAS RN 107-87-9),
— with a total solid content by weight of 55 % or more, but
not more than 57 %, and
— with a specific gravity of 1,40 g/cm 3 or more, but not more
than 1,60 g/cm 3 ,
used to imprint electrodes ( 1 )
ex 3707 90 20 50 Dry
ink
powder
or
toner
blend,
consisting
of:
0 % 31.12.2017
— styrene acrylate/butadiene copolymer
— either carbon black or an organic pigment
— whether or not containing polyolefin or amorphous silica
for use as a developer in the manufacturing of ink/toner filled
bottles or cartridges for facsimile machines, computer printers
and copiers ( 1 )
(*) ex 3802 90 00 11 Soda
flux
calcinated
diatomaceous
earth,
acid
washed,
for
use
as 0 % 31.12.2017
a filter aid in the manufacture of pharmaceutical and/or
biochemical products ( 1 )
ex 3812 30 80 75 N,N’-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, 0 % 31.12.2017
polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine
(CAS RN 193098-40-7)

---

L 179/28
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 3812 30 80 80 UV-stabiliser,
consisting
of:
0 % 31.12.2017
— a
hindered
amine:
N,N’-bis(1,2,2,6,6-pentamethyl-
4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-
dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-
40-7) and
— either an o-hydroxyphenyl triazine UV light absorber or
— a chemically modified phenolic compound
(*) ex 3812 30 80 85 Mixture
containing
by
weight:
0 % 31.12.2016
— 70 % or more but not more than 80 % of bis(1,2,2,6,6-
pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and
— 20 % or more but not more than 30 % of methyl-1,2,2,6,6-
pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)
(*) ex 3824 90 97 08 Mixture
of
divinylbenzene-isomers
and
ethylvinylbenzene- 0 % 31.12.2014
isomers, containing by weight 56 % or more but not more
than 85 % of divinylbenzene (CAS RN 1321-74-0)
(*) ex 3824 90 97 18 Poly(tetramethylene
glycol)
bis[(9-oxo-9H-thioxanthen-1- 0 % 31.12.2013
yloxy)acetate] with an average polymer chain length of less
than 5 monomer units (CAS RN 515136-48-8)
ex 3824 90 97 47 Platinum
oxide
(CAS
RN
12035-82-4)
fixed
on
a
porous 0 % 31.12.2017
support of aluminium oxide (CAS RN 1344-28-1), containing
by weight:
— 0,1 % or more but not more than 1 % of platinum, and
— 0,5 % or more but not more than 5 % of ethylaluminium
dichloride (CAS RN 563-43-9)
ex 3824 90 97 49 Preparation
containing:
0 % 31.12.2017
— C,C’-azodi(formamide) (CAS RN 123-77-3),
— magnesium oxide (CAS RN 1309-48-4) and
— zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)
in which the gas formation from C,C’-azodi(formamide) occurs
at 135 °C
ex 3824 90 97 51
Diethylene glycol propylene glycol triethanolamine titanate
0 % 31.12.2017
complexes (CAS RN 68784-48-5) dissolved in diethylene
glycol (CAS RN 111-46-6)
(*) ex 3824 90 97 87 Paste
containing
by
weight:
0 % 31.12.2017
— 75 % or more, but not more than 85 % of copper,
— inorganic oxides,
— ethyl cellulose, and
— a solvent
(*) ex 3824 90 97 93 Solution
containing
by
weight
80
%
or
more
of
2,4,6-trimethyl
0 % 31.12.2013
benzaldehyde (CAS RN 487-68-3) in acetone
(*) ex 3824 90 97 94 Particles
of
silicon
dioxide
on
which
are
covalently
bonded 0 % 31.12.2013
organic compounds, for use in the manufacture of high
performance liquid chromatography columns (HPLC) and
sample preparation cartridges ( 1 )

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/29
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 3905 30 00 10 Viscous
preparation,
essentially
consisting
of
poly(vinyl
alcohol) 0 % 31.12.2017
(CAS RN 9002-89-5), an organic solvent and water for use as
protective coating of wafers during the manufacturing of semi
conductors ( 1 )
ex 3905 91 00 20 Water
soluble
copolymer
of
ethylene
and
vinyl
alcohol
(CAS
RN 0 % 31.12.2017
26221-27-2), containing by weight not more than 13 % of the
monomer unit ethylene
ex 3906 90 90 27 Copolymer
of
stearyl
methacrylate,
isooctyl
acrylate
and
acrylic 0 % 31.12.2017
acid, dissolved in isopropyl palmitate
ex 3907 20 20 20
Polytetramethylene ether glycol with a weight average molecular
0 % 31.12.2017
weight (Mw) of 2 700 or more but not more than 3 100 (CAS
RN 25190-06-1)
(*) ex 3907 20 20 30
Mixture, containing by weight 70 % or more but not more than
0 % 31.12.2013
80 % of a polymer of glycerol and 1,2-epoxypropane and 20 %
or more but not more than 30 % of a copolymer of dibutyl
maleate and N-vinyl-2-pyrrolidone
(*) ex 3907 20 20 40 Copolymer
of
tetrahydrofuran
and
tetrahydro-3-methylfuran 0 % 31.12.2013
with a number average molecular weight (Mn) of 3 500 (± 100)
(*) ex 3907 40 00 10 Polycarbonate
pellets:
0 % 31.12.2016
— containing 7 % or more but not more than 15 % by weight
of non-halogen flame retardant, and
— with a specific gravity of 1,20 (± 0,01)
(*) ex 3907 99 90 30 Poly(hydroxyalkanoate),
predominantly
consisting
of
poly(3- 0 % 31.12.2015
hydroxybutyrate)
(*) ex 3913 90 00 20
(*) ex 3909 50 90 10 UV
curable
water
soluble
liquid
photopolymer
consisting
of
a 0 % 31.12.2014
mixture by weight of
— 60 % or more of two-functional acrylated polyurethane
oligomers and
— 30 % (± 8 %) of mono-functional and tri-functional (metha)
acrylates, and
— 10 % (± 3 %) of hydroxyl functionalised mono-functional
(metha) acrylates
ex 3919 10 80 47 Polyester,
polyurethane
or
polycarbonate
foil:
0 % 31.12.2017
— with pressure sensitive silicone polymer adhesive,
ex 3919 90 00 32
— of a total thickness of not more than 0,7 mm,
— of a total width of 1 cm or more, but not more than 1 m,
— whether or not in rolls
of a kind used for the protection of the surface of products of
headings 8521 and 8528

---

L 179/30
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 3919 10 80 53 Polyethylene
foil:
0 % 31.12.2017
— with pressure sensitive, non-rubber adhesive adhering solely
ex 3919 90 00 34
to clean and smooth surfaces,
ex 3920 10 28 93
— of a total thickness of 0,025 mm or more, but not more
than 0,7 mm, and
ex 3920 10 89 50
— of a total width of 6 cm or more, but not more than 1 m,
— whether or not in rolls,
of a kind used for the protection of the surface of products of
headings 8521 and 8528
ex 3919 90 00 36 Printed
laminated
sheet
with
a
central
layer
of
poly(vinyl 0 % 31.12.2017
chloride), coated on both sides with a layer of poly(vinyl
fluoride)
ex 3920 49 10 95
— whether or not with a pressure or heat sensitive adhesive
layer
— whether or not with a release film
— with a toxicity (as determined by test method ABD 0031) of
not more than 70 ppm hydrogen fluoride, not more than
120 ppm hydrogen chloride, not more than 10 ppm
hydrogen cyanide, not more than 10 ppm nitrogen oxides,
not more than 300 ppm carbon monoxide and not more
than 10 ppm dihydrogen sulphide and sulphur dioxide taken
together
— with a flammability within 60 seconds of not more than
130 mm (as determined by test method FAR 25 App.F Pt. I
Amdt.83)
— with a weight (without release film) of 240 g/m 2 (± 30 g/m 2 )
without adhesive layer, of 340 g/m 2 (± 40 g/m 2 ) with heat
sensitive adhesive layer or of 330 g/m 2 (± 40 g/m 2 ) with
pressure sensitive layer
ex 3919 90 00 38 Self-adhesive
film
composed
of:
0 % 31.12.2017
— a top layer predominantly of polyurethane mixed with
acrylic polymer emulsions and titanium dioxide,
— whether or not containing a second layer of a mixture of
vinyl acetate-ethylene copolymer and cross-linkable vinyl
acetate polymer emulsions,
— not more than 6 % by weight of other additives,
— a pressure sensitive adhesive; and
— covered on one side with a release liner,
— whether or not with a separate self-adhesive over laminate
protective film,
— of a total thickness of not more than 400 μm
ex 3919 90 00 40 Film,
with
a
total
thickness
of
40
μm or more, consisting of one
0 % 31.12.2017
or more layers of transparent polyester film:
— containing at least one infrared reflective layer with a total
normal reflectance according to EN 12898 of 80 % or more
— having on one side a layer with a normal emissivity
according to EN 12898 of not more than 0,2
— coated on the other side with a pressure sensitive adhesive
and a release liner

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/31
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 3919 90 00 42 Self-adhesive
film
composed
of:
0 % 31.12.2017
— a first layer containing a mixture of thermoplastic poly
urethane and anti-blocking agent,
— a second layer containing a maleic anhydride copolymer,
— a third layer containing a mixture of low density poly
ethylene, titanium dioxide and additives,
— a fourth layer containing a mixture of low density poly
ethylene, titanium dioxide, additives and colour pigment,
— a pressure sensitive adhesive; and
— covered on one side with a release liner
— whether or not with a separate self-adhesive over laminate
protective film
— of a total thickness of not more than 400 μm
ex 3919 90 00 44 Printed
laminated
sheet
0 % 31.12.2017
— with a core layer of glass fabric, coated on each side with a
ex 3921 90 60 95
layer of poly(vinyl chloride),
— on one side covered with a layer of poly(vinyl fluoride),
— whether or not with a pressure sensitive adhesive layer and a
release film on the other side,
— with a toxicity (as determined by test method ABD 0031) of
not more than 50 ppm hydrogen fluoride, not more than
85 ppm hydrogen chloride, not more than 10 ppm
hydrogen cyanide, not more than 10 ppm nitrogen oxides,
not more than 300 ppm carbon monoxide and not more
than 10 ppm dihydrogen sulphide and sulphur dioxide taken
together,
— with a flammability within 60 seconds of not more than
110 mm (as determined by test method FAR 25 App.F Pt. I
Amdt.83), and
— with a weight (without release film) of 490 g/m 2 (± 45 g/m 2 )
without adhesive layer or of 580 g/m 2 (± 50 g/m 2 ) with
pressure sensitive layer
ex 3920 20 80 95 Polypropylene
sheet,
put
up
in
rolls,
with:
0 % 31.12.2017
— flame retardant level of UL 94 V-0 for material thicknesses
of 0,25 mm or more and level UL 94 VTM-0 for material
thicknesses of 0,05 mm or more but not more than
0,25 mm (as determined by Flammability Standard UL-94)
— dielectric breakdown of 13,1 kV or more but not more than
60,0 kV(as determined by ASTM D149)
— tensile yield in a machine direction of 30 MPa or more but
not more than 33 MPa (as determined by ASTM D882)
— tensile yield in a transverse direction of 22 MPa or more but
not more than 25 MPa (as determined by ASTM D882)
— density range of 0,988 gm/cm 3 or more but not more than
1,035 gm/cm 3 (as determined by ASTM D792)
— moisture absorption of 0,01 % or more but not more than
0,06 % (as determined by ASTM D570)
for use in the manufacture of insulators used in the electronics
and electrical industries ( 1 )

---

L 179/32
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 3920 62 19 02 Co-extruded
opaque
sheet
of
poly(ethylene
terephthalate),
of
a 0 % 31.12.2013
thickness of 50 μm or more but not more than 350 μm,
consisting especially of a layer containing carbon black
(*) ex 3920 62 19 08 Poly(ethylene
terephthalate)
film,
not
coated
with
an
adhesive,
of 0 % 31.12.2013
a thickness of not more than 25 μm, either:
— only dyed in the mass, or
— dyed in the mass and metallised on one side
(*) ex 3920 62 19 12
Film of poly(ethylene terephthalate) only, of a total thickness of
0 % 31.12.2013
not more than 120 μm, consisting of one or two layers each
containing a colouring and/or UV-absorbing material
throughout the mass, uncoated with an adhesive or any other
material
(*) ex 3920 62 19 18 Laminated
film
of
poly(ethylene
terephthalate)
only,
of
a
total 0 % 31.12.2013
thickness of not more than 120 μm, consisting of one layer
which is metallised only and one or two layers each containing
a colouring and/or UV-absorbing material throughout the mass,
uncoated with an adhesive or any other material
(*) ex 3920 62 19 22 Film
of
poly(ethylene
terephthalate),
coated
or
covered
on
one 0 % 31.12.2013
side or on both sides with a layer of modified polyester, of a
total thickness of 7 μm or more but not more than 11 μm, for
the manufacture of video tapes with a magnetic layer of metallic
pigments and a width of 8 mm or of 12,7 mm ( 1 )
(*) ex 3920 62 19 25
Film of poly(ethylene terephthalate) of a thickness of 186 μm or
0 % 31.12.2014
more but not more than 191 μm coated on one side with an
acrylic layer in a matrix pattern
(*) ex 3920 62 19 38 Poly(ethylene
terephthalate)
film,
of
a
thickness
of
not
more 0 % 31.12.2013
than 12 μm, coated on one side with a layer of aluminium
oxide of a thickness of not more than 35 nm
(*) ex 3920 62 19 48 Sheets
or
rolls
of
poly(ethylene
terephthalate):
0 % 31.12.2015
— coated on both sides with a layer of epoxy acrylic resin,
— of a total thickness of 37 μm (± 3 μm)
(*) ex 3920 62 19 52
Film of poly(ethylene terephthalate), poly(ethylene naphthalate)
0 % 31.12.2013
or similar polyester, coated on one side with metal and/or metal
oxides, containing by weight less than 0,1 % of aluminium, of a
thickness of not more than 300 μm and having a surface resis
tivity of not more than 10 000 ohms (per square) (as
determined by the ASTM D 257-99 method)
(*) ex 3920 62 19 55 Matt
film
of
poly(ethylene
terephthalate),
of
a
specular
gloss
of 0 % 31.12.2013
15 measured at an angle of 45° and 18 measured at an angle of
60° using a gloss meter (as determined by the ISO 2813:2000
method) and a width of 1 600 mm or more
(*) ex 3920 62 19 58 Film
of
white
poly(ethylene
terephthalate),
dyed
in
the
mass,
of
a 0 % 31.12.2013
thickness of 185 μm or more but not more than 253 μm,
coated on both sides with an antistatic layer

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/33
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 3920 62 19 76 Transparent
poly(ethylene
terephthalate)
film:
0 % 31.12.2013
— coated on both sides with layers of organic substances on
the basis of acryl of a thickness of 7 nm or more but not
more than 80 nm,
— with a surface tension of 36 Dyne/cm or more but not more
than 39 Dyne/cm,
— with a light transmission of more than 93 %,
— with a haze value of not more than 1,3 %,
— with a total thickness of 10 μm or more but not more than
350 μm,
— with a width of 800 mm or more but not more than
1 600 mm
(*) ex 3920 62 19 81 Poly(ethylene
terephthalate)
film:
0 % 31.12.2017
— of a thickness of not more than 20 μm,
— coated on at least one side with a gas barrier layer consisting
of a polymeric matrix in which silica has been dispersed and
of a thickness of not more than 2 μm
(*) ex 3920 92 00 30 Polyamide
film:
0 % 31.12.2013
— of a thickness of not more than 20 μm,
— coated on at least one side with a gas barrier layer which
consists of a polymeric matrix in which silica has been
dispersed and of a thickness of not more than 2 μm
ex 3920 99 28 55 Thermoplastic
polyurethane
film
extruded,
with:
0 % 31.12.2017
— not self-adhesive,
— an index of yellow lower of more than 1,0 but not more
than 2,5 for 10 mm stacked films (as determined by test
method ASTM E 313-10),
— a light transmission higher to 87 % for 10 mm stacked films
(as determined by test method ASTM D 1003-11),
— a total thickness of 0,38 mm or more, but not more than
7,6 mm,
— a width of 99 cm or more, but not more than 305 cm,
of a kind used in the production of laminated safety glass
ex 3921 13 10 20 Rolls
of
open-cell
polyurethane
foam:
0 % 31.12.2017
— with a thickness of 2,29 mm (± 0,25 mm),
— surface-treated with a foraminous adhesion promoter, and
— laminated to a polyester film and a layer of textile material
(*) ex 3921 90 55 20 Pre-impregnated
reinforced
fibreglass
containing
cyanate
ester 0 % 31.12.2013
resin or bismaleimide (B) triazine (T) resin mixed with epoxide
resin, measuring:
— 469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or
— 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or
— 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm
for use in the manufacture of printed circuit boards ( 1 )

---

L 179/34
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 3926 90 97 21 Television
pedestal
stands
with
or
without
bracket
for
fixation
to 0 % 31.12.2016
and stabilisation of television cabinet case/body
(*) ex 7020 00 10 10
(*) ex 7326 90 98 40
(*) ex 7616 99 90 77
ex 4104 41 19 10 Buffalo
leather,
split,
chrome
tanned
synthetic
retanned
(“crust”), 0 % 31.12.2017
dry
ex 7009 10 00 10 Mirror-glass
for
rear-view
mirrors:
0 % 31.12.2017
— equipped with plastic backing plate,
— having the ability to reflect variable intensities of ambient
light,
— whether or not equipped with a heating element, and
— whether or not equipped with Blind Spot Module (BSM)
display
(*) ex 7019 12 00 05
Rovings ranging from 1 980 to 2 033 tex, composed of
0 % 31.12.2017
continuous glass filaments of 9 μm (± 0,5 μm)
(*) ex 7019 12 00 25
(*) ex 7607 11 90 30 Laminated
aluminium
foil
with:
0 % 31.12.2013
— 99 % or more of aluminium,
— a silica and water glass free hydrophilic coating,
— a total thickness of not more than 0,120 mm,
— a tensile strength of 100 N/mm 2 or more (as determined by
test method ASTM E8), and
— an elongation at break of 1 % or more
(*) ex 7607 20 90 20
Lubricating entry sheet of a total thickness of not more than
0 % 31.12.2015
350 μm, comprising of:
— a layer of aluminium foil of a thickness of 70 μm or more
but not more than 150 μm,
— a water soluble lubricant of a thickness of 20 μm or more
but not more than 200 μm and solid at room temperature
ex 7616 99 90 75 Parts
in
the
shape
of
a
rectangular
frame:
0 % 31.12.2017
— of painted aluminium,
— with a length of 1 011 mm or more but not more than
1 500 mm,
— with a width of 622 mm or more but not more than
900 mm,
— with a thickness of 0,6 mm (± 0,1 mm),
of a kind used in the manufacture of TV sets

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/35
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 8105 90 00 10 Bars
or
wires
made
of
cobalt
alloy
containing,
by
weight:
0 % 31.12.2017
— 35 % (± 2 %) cobalt,
— 25 % (± 1 %) nickel,
— 19 % (± 1 %) chromium and
— 7 % (± 2 %) iron
conforming to the material specifications AMS 5842, of a kind
used in the aerospace industry
(*) ex 8301 60 00 10 Keypads,
wholly
of
either
silicone
or
polycarbonate,
including 0 % 31.12.2015
printed keys with electrical contacting elements
(*) ex 8413 91 00 20
(*) ex 8419 90 85 20
(*) ex 8438 90 00 10
(*) ex 8468 90 00 10
(*) ex 8476 90 00 10
(*) ex 8479 90 80 87
(*) ex 8481 90 00 20
(*) ex 8503 00 99 45
(*) ex 8515 90 00 20
(*) ex 8531 90 85 20
(*) ex 8536 90 85 96
(*) ex 8543 90 00 50
(*) ex 8708 91 99 10
(*) ex 8708 99 97 30
(*) ex 9031 90 85 30
(*) ex 8305 20 00 10 Staples:
0 % 31.12.2013
— of a length of 28 mm,
— unbent,
packed in a plastic cartridge for use in copiers and printers
resulting in a staple of a width of 12 mm (± 1 mm) and a
depth of 8 mm (± 1 mm) ( 1 )
ex 8431 20 00 30 Drive
axle
assembly
containing
differential,
reduction
gears, 0 % 31.12.2017
crown wheel, drive shafts, wheel hubs, brakes and mast
mounting arms for use in the manufacture of vehicles in
heading 8427 ( 1 )

---

L 179/36
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 8501 10 99 60 DC
motor
0 % 31.12.2017
— with a rotor speed of 3 500 rpm or more but not more than
5 000 rpm loaded and not more than 6 500 rpm when not
loaded
— with a power supply voltage of 100 V or more but not more
than 240 V
for use in the manufacture of electric fryers ( 1 )
ex 8503 00 99 40 Fuel
cell
membrane,
in
rolls
or
sheets,
with
a
width
of
not
more 0 % 31.12.2017
than 150 cm, of a kind used for manufacture of fuel cells in
heading 8501
(*) ex 8504 40 82 40
Printed circuit board equipped with a bridge rectifier circuit and
0 % 31.12.2017
other active and passive components
— with two output connectors
— with two input connectors which are available and useable
in parallel
— able to switch between bright and dimmed operation mode
— with an input voltage of 40 V (+ 25 % -15 %) or 42 V
(+ 25 % -15 %) in bright operation mode, with an input
voltage of 30 V (± 4 V) in dimmed operation mode, or
— with an input voltage of 230 V (+ 20 % -15 %) in bright
operation mode, with an input voltage of 160 V (± 15 %) in
dimmed operation mode, or
— with an input voltage of 120 V (15 % -35 %) in bright
operation mode, with an input voltage of 60 V (± 20 %)
in dimmed operation mode
— with an input current reaching 80 % of its nominal value
within 20 ms
— with an input frequency of 45 Hz or more, but not more
than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V
versions
— with an maximum inrush current overshoot of not more
than 250 % of the input current
— with a period of the inrush current overshoot of not more
than 100 ms
— with an input current undershoot of not less than 50 % of
the input current
— with a period of the inrush current undershoot of not more
than 20 ms
— with a presettable output current
— with an output current reaching 90 % of its nominal pre-set
value within 50 ms
— with an output current reaching zero within 30 ms after
removal of the input voltage
— with an defined failure status in case of no-load or too-high
load (end-of-life function)

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/37
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
(*) ex 8504 40 82 50 Rectifier
in
a
housing
with
0 % 31.12.2017
— a rated power of not more than 250 W
— an input voltage of 90 V or more, but not more than 305 V
— a certified input frequency of 47 Hz or more, but not more
than 440 Hz
— a constant current output of 350 mA or more, but not more
than 15 A
— an inrush current of not more than 10 A
— an operating temperature range of – 40 °C or more, but not
more than + 85 °C,
— suitable for driving of LED-illuminants
ex 8505 11 00 35 Permanent
magnets
of
an
alloy
of
either
neodymium,
iron
and 0 % 31.12.2017
boron, or samarium and cobalt coated having undergone
inorganic passivation (inorganic coating) using zinc phosphate
for the industrial manufacture of products in motor or sensory
applications ( 1 )
ex 8507 60 00 25 Rectangular
modules
for
incorporation
in
lithium-ion 0 % 31.12.2017
rechargeable batteries, with:
— a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm)
— a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)
— a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm)
— a weight of 45,9 kg or 46,3 kg
— a rating of 75 Ah and
— a nominal voltage of 60 V
ex 8507 60 00 35 Lithium-ion
rechargeable
batteries,
with:
0 % 31.12.2017
— a length of 1 475 mm or more, but not more than
1 515 mm,
— a width of 1 365 or more, but not more than 1 375 mm,
— a height of 260 mm or more, but not more than 270 mm,
— a weight of 320 kg or more, but not more than 330 kg,
— a nominal capacity of 18,4 Ah or more, but not more than
130 Ah,
— put up in packs of 12 or 16 modules
(*) ex 8507 60 00 50
Modules for the assembly of batteries of ion lithium electric
0 % 31.12.2017
accumulators with:
— a length of 298 mm or more, but not more than 408 mm,
— a width of 33,5 mm or more, but not more than 209 mm,
— a height of 138 mm or more, but not more than 228 mm,
— a weight of 3,6 kg or more, but not more than 17 kg, and
— a power of 458 kWh or more, but not more than
2 158 kWh

---

L 179/38
EN
Official Journal of the European Union
29.6.2013
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 8516 90 00 70 Inner
pot
0 % 31.12.2017
— containing side and central openings,
— of annealed aluminium,
— with a ceramic coating, heat resistant to more than 200 °C
for use in the manufacture of an electric fryer ( 1 )
ex 8522 90 80 15 Heat
sinks
and
cooling
fins
of
aluminium,
for
maintaining
the 0 % 31.12.2017
operating temperature of transistors and/or integrated circuits in
products of heading 8521
ex 8525 80 19 45 Camera
module
with
a
resolution
of
1
280
*
720
P
HD,
with 0 % 31.12.2017
two microphones, for use in the manufacture of products of
heading 8528 ( 1 )
(*) ex 8526 91 20 80 Integrated
audio
module
(IAM)
with
a
digital
video
output
for 0 % 31.12.2015
connection to an LCD touch screen monitor, interfaced over the
Media Oriented Systems Transport (MOST) network and trans
(*) ex 8527 29 00 10
ported over the MOST High protocol, with:
— a printed circuit board (PCB) containing a Global Positioning
System (GPS) receiver, a gyroscope, and a Traffic Message
Channel (TMC) tuner,
— a hard disk drive supporting multiple maps,
— a HD radio,
— a voice recognition system,
— a CD and DVD drive,
— Bluetooth, MP3 and USB input connectivity,
— a voltage of 10 V or more but not more than 16 V,
for the use in the manufacture of vehicles in Chapter 87 ( 1 )
ex 8529 90 92 70 Rectangular
fastening
and
covering
frame:
0 % 31.12.2017
— of an aluminium alloy containing silicon and magnesium,
— with a length of 900 mm or more but not more than
1 500 mm,
— with a width of 600 mm or more but not more than
950 mm,
of a kind used for the production of TV sets
ex 8529 90 92 80 Printed
circuit
board
for
backlight:
0 % 31.12.2013
— with LED diodes equipped with prisms,
ex 9405 40 39 40
— whether or not with connector(s) fitted at one or both ends,
to be incorporated in goods of heading 8528 ( 1 )
ex 8536 69 90 51 SCART
type
connectors,
built
into
a
plastic
or
metal
housing, 0 % 31.12.2017
with 21 pins in 2 rows, for use in the manufacture of products
falling within headings 8521 and 8528 ( 1 )
(*) ex 8540 20 80 91 Photomultiplier 0
% 31.12.2016

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/39
CN code TARIC Description
Rate of
Date foreseen for
autonomous duty mandatory review
ex 8544 42 90 30 PET
insulated
electric
conductor
with:
0 % 31.12.2017
— 10 or 80 individual wires,
— a length of 50 mm or more, but not more than 800 mm,
— connector(s) and/or plug(s) fitted at one or both ends,
for use in the manufacture of products falling within headings
8521 and 8528 ( 1 )
ex 9001 90 00 25 Unmounted
optical
elements
made
from
moulded
infrared 0 % 31.12.2017
transmitting chalcogenide glass, or a combination of infrared
transmitting chalcogenide glass and another lens material
ex 9002 90 00 40 Mounted
lenses
made
from
infrared
transmitting
chalcogenide 0 % 31.12.2017
glass, or a combination of infrared transmitting chalcogenide
glass and another lens material
( 1 ) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).
( 2 ) The specific duty rate is applicable.
(*) Suspension relating to a product in the Annex to Regulation (EU) No 1344/2011 for which the CN or TARIC code or the product description is modified by this
Regulation.

---

L 179/40
EN
Official Journal of the European Union
29.6.2013
ANNEX II
Products referred to in point (2) of Article 1
CN code TARIC
(*) ex 2007 99 50 40
(*) ex 2007 99 50 50
(*) ex 2007 99 50 60
ex 2008 60 19 30
ex 2008 60 39 30
(*) ex 2008 99 48 20
(*) ex 2008 99 48 93
(*) ex 2008 99 49 50
(*) ex 2805 30 90 40
(*) ex 2805 30 90 50
(*) ex 2805 30 90 60
(*) ex 2818 10 91 10
ex 2916 19 95 30
ex 2917 39 95 10
(*) ex 2918 99 90 40
ex 2934 99 90 12
ex 3204 11 00 10
(*) ex 3204 11 00 20
(*) ex 3204 17 00 25
ex 3204 17 00 45
ex 3204 17 00 55
(*) ex 3204 17 00 60
(*) ex 3204 17 00 70
ex 3204 19 00 72
(*) ex 3204 19 00 73
(*) ex 3802 90 00 11
(*) ex 3824 90 97 08
(*) ex 3824 90 97 31
(*) ex 3824 90 97 70
(*) ex 3824 90 97 72

---

EN
29.6.2013 Official
Journal
of
the
European
Union L
179/41
CN code TARIC
(*) ex 3824 90 97 73
(*) ex 3824 90 97 75
(*) ex 3907 20 20 11
(*) ex 3907 20 20 12
(*) ex 3907 40 00 10
(*) ex 3907 99 90 30
(*) ex 3909 50 90 10
ex 3911 90 99 75
(*) ex 3920 62 19 01
(*) ex 3920 62 19 03
(*) ex 3920 62 19 07
(*) ex 3920 62 19 09
(*) ex 3920 62 19 11
(*) ex 3920 62 19 13
(*) ex 3920 62 19 17
(*) ex 3920 62 19 19
(*) ex 3920 62 19 21
(*) ex 3920 62 19 23
(*) ex 3920 62 19 24
(*) ex 3920 62 19 26
(*) ex 3920 62 19 37
(*) ex 3920 62 19 39
(*) ex 3920 62 19 47
(*) ex 3920 62 19 49
(*) ex 3920 62 19 51
(*) ex 3920 62 19 53
(*) ex 3920 62 19 54
(*) ex 3920 62 19 56
(*) ex 3920 62 19 57
(*) ex 3920 62 19 59
(*) ex 3920 62 19 75
(*) ex 3920 62 19 77
(*) ex 3920 62 19 81

---

L 179/42
EN
Official Journal of the European Union
29.6.2013
CN code TARIC
(*) ex 3920 92 00 30
(*) ex 3921 90 55 20
(*) ex 7019 12 00 05
(*) ex 7019 12 00 25
(*) ex 7326 90 98 40
(*) ex 7607 11 90 30
(*) ex 7607 20 90 20
ex 8108 20 00 20
ex 8108 90 50 40
ex 8108 90 50 80
(*) ex 8305 20 00 10
(*) ex 8504 40 82 40
(*) ex 8504 40 82 50
(*) ex 8507 60 00 50
(*) ex 8526 91 20 80
(*) ex 8528 59 80 10
(*) ex 8536 90 85 96
(*) ex 8538 90 99 94
(*) ex 8540 20 80 91
(*) ex 8543 90 00 50
ex 8708 80 99 10
ex 9405 40 39 30
(*) Suspension relating to a product in the Annex to Regulation (EU) No 1344/2011 for which the CN or TARIC code or the product
description is modified by this Regulation.

---

Document Outline

• �

---