理事会指令89/682/EEC,对窄带轮式农用和林用拖拉机后置翻车保护结构的86/298/EEC指令进行修改
技术法规类型:欧盟Eurlex法规 来源:tbtmap
EURLEX ID:31989L0682
OJ编号:OJ L 398, 30.12.1989, p. 29-30
中文标题:理事会指令89/682/EEC,对窄带轮式农用和林用拖拉机后置翻车保护结构的86/298/EEC指令进行修改
原文标题:Council Directive 89/682/EEC of 21 December 1989 amending directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors
分类:13.30.11_农用和林用拖拉机
文件类型:二级立法 Directive|指令
生效日期:1990-01-04
废止日期:2015-12-31
法规全文:查看欧盟官方文件
31989L0682
Title and reference
Council Directive 89/682/EEC of 21 December 1989 amending directive 86/298/EEC on rear-mounted roll-over protection structures of narrow-track wheeled agricultural and forestry tractors
OJ L 398, 30.12.1989, p. 29‘�0 (ES, DA, DE, EL, EN, FR, IT, NL, PT)
Finnish special edition: Chapter 13 Volume 19 P. 0127
Swedish special edition: Chapter 13 Volume 19 P. 0127
Special edition in Czech Chapter 13 Volume 010 P. 96 - 97
Special edition in Estonian Chapter 13 Volume 010 P. 96 - 97
Special edition in Hungarian Chapter 13 Volume 010 P. 96 - 97
Special edition in Lithuanian Chapter 13 Volume 010 P. 96 - 97
Special edition in Latvian Chapter 13 Volume 010 P. 96 - 97
Special edition in Maltese Chapter 13 Volume 010 P. 96 - 97
Special edition in Polish Chapter 13 Volume 010 P. 96 - 97
Special edition in Slovakian Chapter 13 Volume 010 P. 96 - 97
Special edition in Slovenian Chapter 13 Volume 010 P. 96 - 97
DA DE EL EN ES FR IT NL PT
Text
| BG | ES | CS | DA | DE | ET | EL | EN | FR | GA | IT | LV | LT | HU | MT | NL | PL | PT | RO | SK | SL | FI | SV |
| html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | html | |||
| tiff | tiff | tiff | tiff | tiff | tiff | tiff | tiff | tiff |
Authentic language
- The official languages, Norwegian, Icelandic
Dates
- of document: 21/12/1989
of notification: 04/01/1990
of effect: 04/01/1990; Entry into force Date notif.
end of validity: 99/99/9999
of transposition: 03/01/1991; At the latest See Art 2
Classifications
- EUROVOC descriptor:
safety standard
EC conformity marking
protective equipment
tractor
agricultural vehicle
approximation of laws - Directory code:
13.30.11.00 Industrial policy and internal market / Internal market: approximation of laws / Agricultural and forestry tractors
- Subject matter:
Internal market, Technical barriers, Approximation of laws, Safety at work and elsewhere
Miscellaneous information
- Author:
Council - Form:
Directive - Addressee:
The Member States - Internal reference:
COM/88/0626 - Additional information:
Extended to the EEA by 21994A0103(01)
SYN 163 ; Directive amending
Relationship between documents
- Treaty:
European Economic Community - Legal basis:
11957E100A
11957E149 -P2
- Select all documents based on this document
- Amendment to:
31986L0298 Amendment Amendment Annex 2 from 04/01/1990
31986L0298 Amendment Amendment Annex 3 from 04/01/1990
31986L0298 Amendment Amendment Annex 6 from 04/01/1990
31986L0298 Amendment Amendment Article 1 from 04/01/1990
51988PC0626 Adoption
- Amended by:
Corrected by 31989L0682R(01)
Incorporated by 21994A0103(51)
- Consolidated versions
1990-01-04
- Display the national execution measures
MNE - Select all documents mentioning this document
Consolidated versions
- consolidation form:
01989L0682
01986L0298
Text
| Bilingual display: BG CS DA DE EL EN ES ET FI FR HU IT LT LV MT NL PL PT RO SK SL SV |
COUNCIL DIRECTIVE
of 21 December 1989
amending Directive 86/298/EEC on rear-mounted roll-over protection structures of
narrow-track wheeled agricultural and forestry tractors
(89/682/EEC)
THE COUNCIL OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100a thereof,
Having regard to the proposal from the Commission (1),
In cooperation with the European Parliament (2),
Having regard to the opinion of the Economic and Social Committee (3),
Whereas it is necessary to adopt measures with the aim of progressively establishing the internal market over a period expiring on 31 December 1992; whereas the internal market comprises an area without internal frontiers in which the
free movement of goods, persons, services and capital is ensured;
Whereas Article 13 of Directive 86/298/EEC (4) lays down that the provisions at present in force shall be supplemented by provisions introducing additional impact tests into the dynamic test procedure;
Whereas, since provision is already made for an additional test in the case of the static test procedure, it is necessary also in that of the dynamic test procedure to provide for an additional test which more accurately reflects the situation in the event of tractor roll-over in order that these two test procedures may be rendered equivalent and the present imbalance between them eliminated;
Whereas the purely theoretical parameters and calculations on which the additional dynamic impact test was initially based have been the subject of practical experiments that leave no doubt as to their reliability;
Whereas it is also necessary to amend the scope of Directive 86/298/EEC so as to clarify the wording of the second indent of Article 1 concerning the tyres fitted to the front and rear axles, and thus eliminate any possibility of differing interpretations,
OJ N掳 C 256, 9. 10. 1989, p. 77.
HAS ADOPTED THIS DIRECTIVE:
Article 1
Directive 86/298/EEC is hereby amended as follows:
1.
the second indent of Article 1 is replaced by the following:
'- fixed or adjustable minimum track width of less than 1 150 mm for the axles fitted with the widest tyres; since the axle fitted with the widest tyres is assumed to be adjusted to a maximum track width of 1 150 mm, the other axle must be capable of being adjusted in such a way that the outer edges of the narrowest tyres do not project beyond the outer edges of the tyres on the axle with the widest tyres. Where both axles are equipped with wheels and tyres of the same size, the fixed or adjustable track width of both axles must be less than 1 150 mm;'
2.
in Annex II, point 3.1.1 is replaced by the following:
'3.1.1.
After each partial test in the dynamic test procedure, it shall be free from tears or cracks as described in point 3.1 of Annex III (A).
If, during the dynamic test, significant tears or cracks appear, an additional impact test or crushing test as defined in point 1.6 of Annex III (A) must be performed immediately after the test which caused these tears or cracks to appear.';
3.
in Annex III (A), point 1.6 is replaced by the following:
'1.6.
Additional tests
'1.6.1.
If cracks or tears which cannot be considered negligible appear during an impact test, a second, similar test, but with a height of fall of:
Hm = 10 × 12 + 4a
Hm =
H
10
×
12 + 4a
1 + 2a
shall be performed immediately after the impact test causing these tears or cracks to appear, ''a'' being the ratio of the permanent deformation
to the elastic deformation (a = Dp/De) as measured at the point of impact.
The additional permanent deformation due to the second impact must not exceed 30 % of the permanent deformation due to the first impact.
In order to be able to carry out the additional test, it is necessary to measure the elastic deformation during all of the impact tests.
,1.6.2.
If, during a crushing test, significant tears or cracks appear, a second, similar crushing test, but with a force equal to 1,2 Fv, shall be performed immediately after the crushing test which caused these tears and cracks to appear.';
4.
in Annex VI, the following point is inserted:
'7.3.
Indication and results of any additional dynamic test.'
Article 2
Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive not later than 12 months from 3 January 1990. They shall forthwith inform the Commission thereof.
Article 3
This Directive is addressed to the Member States.
Done at Brussels, 21 December 1989.
For the Council
The President
E. CRESSON
(1) OJ N掳 C 311, 6. 12. 1988, p. 9.
(2) OJ N掳 C 120, 16. 5. 1989, p. 70, and (3) OJ N掳 C 102, 24. 4. 1989, p. 5.
(4) OJ N掳 L 186, 8. 7. 1986, p. 26.
| Top |
托管标准,您可以接收以下服务:
1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户;
2 随时在标准托管页面中查看到该条标准的最新状态;
3 若用户有在学习和科研中的需要,可以在标准托管页面中试阅标准;
4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持;
5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询;
6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务;
标准资讯点击排行榜 全部
资讯标题点击
[[ n.title ]] [[ n.read ]]大连标准化公共服务平台
版权:大连标准化研究院有限公司
地址:大连市中山区高原街56号
电话:0411-82740851