委员会委托条例(EU) 2018/44,修订关于针对西南水域某些底层渔业丢弃计划的委托条例(EU) 2016/2374

技术法规类型:欧盟Eurlex法规 来源:tbtmap

EURLEX ID:32018R0044

OJ编号:OJ L 7, 12.1.2018, p. 1–5

中文标题:委员会委托条例(EU) 2018/44,修订关于针对西南水域某些底层渔业丢弃计划的委托条例(EU) 2016/2374

原文标题:Commission Delegated Regulation (EU) 2018/44 of 20 October 2017 amending Delegated Regulation (EU) 2016/2374 establishing a discard plan for certain demersal fisheries in South-Western waters

生效日期:2018-01-13

废止日期:9999-12-31

法规全文:查看欧盟官方文件

12.1.2018   

EN

Official Journal of the European Union

L 7/1


COMMISSION DELEGATED REGULATION (EU) 2018/44

of 20 October 2017

amending Delegated Regulation (EU) 2016/2374 establishing a discard plan for certain demersal fisheries in South-Western waters

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 1380/2013 of the European Parliament and of the Council of 11 December 2013 on the Common Fisheries Policy, amending Council Regulations (EC) No 1954/2003 and (EC) No 1224/2009 and repealing Council Regulations (EC) No 2371/2002 and (EC) No 639/2004 and Council Decision 2004/585/EC (1), and in particular Articles 15(6) and 18(1) and (3) thereof,

Whereas:

(1)

Regulation (EU) No 1380/2013 aims to progressively eliminate discards in all Union fisheries through the introduction of a landing obligation for catches of species subject to catch limits.

(2)

In order to implement the landing obligation, Article 15(6) of Regulation (EU) No 1380/2013 empowers the Commission to adopt discard plans by means of a delegated act for a period of no more than three years on the basis of joint recommendations developed by Member States in consultation with the relevant Advisory Councils.

(3)

Commission Delegated Regulation (EU) 2016/2374 (2) established a discard plan for certain demersal fisheries in South-Western waters following a joint recommendation submitted by Belgium, Spain, France, the Netherlands and Portugal in 2016.

(4)

Belgium, Spain, France, the Netherlands and Portugal have a direct fisheries management interest in South-Western waters. On 2 June 2017 those Member States submitted a new joint recommendation to the Commission, after consultation of the South Western Waters Advisory Council, suggesting certain amendments to the discard plan.

(5)

The new joint recommendation was reviewed by STECF (3). The measures suggested by that joint recommendation comply with Article 18(3) of Regulation (EU) No 1380/2013 and may thus be included in the discard plan.

(6)

The new joint recommendation suggests that the fisheries of blue whiting (Micromesistius poutassou) caught with bottom trawls and seines in ICES divisions VIIIc and IXa be also included in the discard plan established by Regulation (EU) 2016/2374.

(7)

The new joint recommendation also suggests to amend the definition of the fishery for anglerfish (Lophiidae) in ICES divisions VIII a, b, d and e and ICES divisions VIIIc and IXa, as set out in the discard plan, by adding a gear code for trammel nets (GTR) and lowering the mesh size for all set nets from 200 to 170 mm.

(8)

The new joint recommendation suggests furthermore to maintain the exemption from the landing obligation granted by the discard plan for Norway lobster caught by trawls in ICES subareas VIII and IX, as existing scientific evidence indicates possible high survival rates, taking into account the characteristics of the gears targeting that species, the fishing practices and the ecosystem. The STECF in its evaluation concluded that the latest experiments and studies, completed by the additional information provided by Member States, show a sufficent evidence on survival rates. Therefore, that exemption granted twice (for the year 2016 and for the year 2017) should be maintained in the year 2018.

(9)

The de minimis exemption set out in the discard plan for hake, up to a maximum of 6 % in 2018 of the total annual catches of that species by vessels targeting that species in ICES subareas VIII and IX with trawls, is based on the fact that viable increases in selectivity are very difficult to achieve. The STECF concluded that additional selectivity information provided by Member States did contain additional evidence to demonstrate that selectivity is very difficult to achieve for the métiers involved. However, additional work should be carried out in order to improve the justification for this exemption. That exemption should therefore be extended to the year 2018, and under the condition that Member States provide improved information to support this exemption that would be assessed by STECF.

(10)

Delegated Regulation (EU) 2016/2374 should be amended accordingly.

(11)

Since the measures provided for in this Regulation impact directly on the economic activities linked to and the planning of the fishing season of Union vessels, this Regulation should enter into force immediately after its publication. It should apply from 1 January 2018,

HAS ADOPTED THIS REGULATION:

Article 1

Delegated Regulation (EC) 2016/2374 is amended as follows:

(1)

In Article 3(1), point (a) is replaced by the following:

‘(a)

for hake (Merluccius merluccius), up to a maximum of 6 % in 2018 of the total annual catches of this species by vessels using trawls and seins (gear codes: OTT, OTB, PTB, OT, PT, TBN, TBS, TX, SSC, SPR, TB, SDN, SX and SV) to catch hake in ICES subareas VIII and IX.’;

(2)

in Article 3(2) the year ‘2017’ is replaced by the year ‘2018’;

(3)

the Annex is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2018.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 20 October 2017.

For the Commission

The President

Jean-Claude JUNCKER


(1)  OJ L 354, 28.1.2013, p. 22.

(2)  Commission Delegated Regulation (EU) 2016/2374 of 12 October 2016 establishing a discard plan for certain demersal fisheries in South-Western waters (OJ L 352, 23.12.2016, p. 33).

(3)  2017-07_STECF PLEN 17-02_JRCxxx.pdf


ANNEX

Fisheries subject to the landing obligation

1.   Common sole (Solea solea) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIa, b, d and e

OTB, OTT, PTB, TBN, TBS, TB, OT, PT, TX

All Bottom Trawls

Mesh size between 70 mm and 100 mm wide

All catches of common sole

TBB

All Beam trawls

Mesh size between 70 mm and 100 mm wide

GNS, GN, GND, GNC, GTN, GTR, GEN

All Trammel nets & Gill nets

Mesh size larger or equal to 100 mm wide

2.   Common sole (Solea solea) and plaice (Pleuronectes platessa) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES division IXa

GNS, GN, GND, GNC, GTN, GTR, GEN

All Trammel nets & Gill nets

Mesh size larger or equal to 100 mm

All catches of common sole and plaice

3.   Hake (Merluccius merluccius) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIa, b, d and e

OTT, OTB, PTB, SDN, OT, PT, TBN, TBS, TX, SSC, SPR, TB, SX, SV

All Bottom Trawls & Seines

Mesh size larger or equal to 100 mm wide

All catches of hake

LL, LLS

All Long lines

All

GNS, GN, GND, GNC, GTN, GEN

All Gill Nets

Mesh size larger or equal to 100 mm wide

ICES divisions VIIIc and IXa

OTT, OTB, PTB, OT, PT, TBN, TBS, TX, SSC, SPR, TB, SDN, SX, SV

All Bottom Trawls and Seines

Vessels which fulfil the following cumulative criteria:

1.

Use mesh size larger or equal to 70 mm

2.

Total hake landings in the period 2014/2015 (1) consist of: more than 5 % of all landed species and more than 5 metric tons.

All catches of hake

GNS, GN, GND, GNC, GTN, GEN

All Gill Nets

Mesh size between 80 and 99 mm wide

LL, LLS

All Long lines

Hook size bigger than 3,85 cm +/– 1,15 cm length and 1,6 cm +/– 0,4 cm width

4.   Anglerfish (Lophiidae) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIa, b, d and e

GNS, GN, GND, GNC, GTN, GEN, GTR

All Trammel nets and Gill Nets

Mesh size larger of equal to 170 mm wide

All catches of anglerfish

ICES divisions VIIIc and IXa

GNS, GN, GND, GNC, GTN, GEN, GTR

All Trammel nets and Gill Nets

Mesh size larger of equal to 170 mm wide

All catches of anglerfish

5.   Norway lobster (Nephrops norvegicus) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIa, b, d and e (only inside functional units)

OTB, OTT, PTB, TBN, TBS, TB, OT, PT, TX

All Bottom Trawls

Mesh size larger or equal to 70 mm

All catches of Norway lobster

ICES divisions VIIIc and IXa (only inside functional units)

OTB, PTB, OTT, TBN, TBS, OT, PT, TX TB

All Bottom Trawls

Mesh size larger or equal to 70 mm

All catches of Norway lobster

6.   Black scabbardfish (Aphanopus carbo) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIc, IX, X and CECAF zone 34.1.2

LLS, DWS

Deepwater set-longlines

All catches of black scabbardfish where the total landings per vessel of all species in 2014 and 2015 (2) consisted of more than 20 % of black scabbardfish

7.   Red seabream (Pagellus bogaraveo) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES division IX

LLS, DWS

Deepwater set-longlines

Hook size bigger than 3,95 cm length and 1,65 cm width

All catches of red seabream where the total landings per vessel of all species in 2014 and 2015 (3) consisted of more than 20 % of red seabream

8.   Blue whiting (Micromesistius poutassou) fisheries

Fishing zones

Gear Code

Fishing gear description

Mesh Size

Species to be landed

ICES divisions VIIIc and IXa

OTT, OTB, PTB, OT, PT, TBN, TBS, TX, SSC, SPR, TB, SDN, SX, SV

All Bottom Trawls and Seines

All

All catches of blue whiting


(1)  Reference period for the year 2017. For 2018 the reference period shall be 2015/2016 and for 2019 the reference period shall be 2016/2017.

(2)  Reference period for the year 2017. For 2018 the reference period shall be 2015/2016 and for 2019 the reference period shall be 2016/2017.

(3)  Reference period for the year 2017. For 2018 the reference period shall be 2015/2016 and for 2019 the reference period shall be 2016/2017.


附件:

P020180428405398043197.pdf
P020180428405398192464.html

托管标准,您可以接收以下服务:

1 标准定期系统查新,若有最新版本,会以站内短信或邮件的形式通知用户;

2 随时在标准托管页面中查看到该条标准的最新状态;

3 若用户有在学习和科研中的需要,可以在标准托管页面中试阅标准;

4 企业如果需要上新产品,我院及时提供标准查询、采购等方面的支持;

5 为企业在标准制修订、企业良好行为创建以及标准化试点过程中遇到的困难,可联系我院指定相关专家负责进行指导帮助、提供政策咨询;

6 为企业提供标准化政策的解读、标准化知识的推广培训、标准自我公开声明、标准文献的免费查询、企业标准化体系建设等方面的标准化服务;

进入企业标准托管

您可以通过编辑查新模板,批量查询指定标准集的最新情况。我们会通过查询,向您展示您所查询标准的:

1. 准确的标准号及标准名称(我们通过人工智能技术对您提交的标准号进行自动纠正)

2. 标准的最新状态(现行、废止或未发布)

3. 若标准已废止并被新标准替代,会反馈被替代的标准

4. 若您已托管此标准,便可以实时跟踪这个标准的最新状态

标准查新 模板下载

您可以在这里检索全球超过140万条标准,支持上百个国内国际标准组织的标准查询。您也可以在这里检索国内各类国家、部委和地方的法律法规。

更多标准子库在持续建设中。

标准检索

标准资讯点击排行榜 全部

资讯标题点击

[[ n.title ]] [[ n.read ]]

大连标准化公共服务平台

版权:大连标准化研究院有限公司

地址:大连市中山区高原街56号

电话:0411-82740851

大连标准